Panasonic DLS6C Service Manual ▷ View online
8.1. Flow Chart
8 Disassembling & Assembling
8.1.1. Disassembly flow chart
Below describes the disassembly flow for the mechanism.
17
DLS6C
8.1.2. Assembly flow chart
Below describes the assembly flow for the mechanism.
18
DLS6C
8.2. Preparation of Service jig
Step 1: Cut the gear out from the clamp plate unit.
Step 2: Insert the gear into the hexagonal wrench.
8.3. Checking of Mechanism unit
8.3.1. Before disassembling
Step 1: Check if the sub rack is disengaged from the traverse
slide plate before disassembly.
slide plate before disassembly.
Caution:
If it is engaged, the following step is necessary.
19
DLS6C
Step 2: Use service jig to turn the gear counter clockwise,
ensure the sub rack is disengaged from the traverse slide plate.
ensure the sub rack is disengaged from the traverse slide plate.
8.3.2. Before assembling
Step 1: Check if the sub rack is below the guide line before
assembly, otherwise the following steps are necessary.
assembly, otherwise the following steps are necessary.
Step 2: Turn over the traverse unit, use service jig to turn the
gear counter clockwise.
gear counter clockwise.
Step 3: Once the sub rack is below the guide line, it is ready for
the assembly.
the assembly.
20
DLS6C
Click on the first or last page to see other DLS6C service manuals if exist.