Panasonic DLS6C Service Manual ▷ View online
Step 4: Hold both points (A) and (B) of the traverse slide plate
to remove it.
to remove it.
Caution:
Avoid touching the grease areas. Below diagram shows the
areas of greasing points.
areas of greasing points.
8.4.6. Disassembly of traverse lock
spring
" Follow the (Step 1) to (Step 3) of item 8.4.1.
" Follow the (Step 1) to (Step 3) of item 8.4.2.
" Follow the (Step 1) to (Step 4) of item 8.4.3.
" Follow the (Step 1) of item 8.4.4.
" Follow the (Step 1) to (Step 4) of item 8.4.5.
" Follow the (Step 1) to (Step 3) of item 8.4.2.
" Follow the (Step 1) to (Step 4) of item 8.4.3.
" Follow the (Step 1) of item 8.4.4.
" Follow the (Step 1) to (Step 4) of item 8.4.5.
Step 1: Release the traverse lock spring as arrows shown to
remove it.
Note: Keep the traverse lock spring in a safe place.
remove it.
Note: Keep the traverse lock spring in a safe place.
25
DLS6C
8.5. Assembling Procedure
8.5.1. Assembly of traverse lock spring
Step 1: Fix the traverse lock spring as arrows shown
respectively.
respectively.
Caution:
Make sure the traverse lock spring is fully catched onto the
traverse slide plate as shown.
traverse slide plate as shown.
8.5.2. Assembly of traverse slide plate
Step 1: Hold both points (A) and (B) of the traverse slide plate,
slot it into the grooves.
slot it into the grooves.
Step 2: Release the guide.
Step 3: Push the traverse slide plate (rib) in to secure the
traverse slide plate.
Step 3: Push the traverse slide plate (rib) in to secure the
traverse slide plate.
26
DLS6C
8.5.3. Assembly of tray drive gear 3
Step 1: Insert the tray drive gear 3 into the slot as shown, press
down until hear a “click” sound is heard.
down until hear a “click” sound is heard.
8.5.4. Assembly of tray
Step 1: Slide the traverse slide plate right to the end.
Step 2: Slide the tray in as arrows shown.
Note: Ensure the tray is underneath both guides.
Note: Ensure the tray is underneath both guides.
27
DLS6C
Step 3: Slide the tray in fully.
Note: Ensure the groove below the tray is aligned with the
traverse slide plate’s guide when sliding the tray in.
Note: Ensure the groove below the tray is aligned with the
traverse slide plate’s guide when sliding the tray in.
8.5.5. Assembly of clamp plate unit
Step 1: Align the clamp plate unit as shown.
Step 2: Push the clamp plate unit as arrow shown until the
catches are properly catched.
catches are properly catched.
28
DLS6C
Click on the first or last page to see other DLS6C service manuals if exist.