DOWNLOAD LG WT-R107 Service Manual ↓ Size: 4.57 MB | Pages: 55 in PDF or view online for FREE

Press the POWER button to turn power on.

Press the CYCLE button to select washing program.

Press the Custom Program button for 3 seconds to store your Custom wash cycle.

Select desired Options.

To recall your Custom cycle.
1. Press POWER on.
2. Select the Custom cycle by pressing the Custom Program button.
3. Press the START/PAUSE button. Then the wash cycle starts. 

Custom Program allows you to store a customized wash cycle for future use.

When the lid is open the machine will not operate, and an alarm Signal or 
“         ” will remind you to close the lid when it starts.

Add the laundry into the washing tub.

Add the Detergent

Close the lid

Add the laundry and press the START/PAUSE button.

If you want to lock all the keys to prevent settings from being changed during the wash operation by a
child, you can use the child lock option.

How to Unlock

After all washing conditions are set according to the
manual.

During the wash program,all the buttons are locked until
washing is completed or it is child-lock function is
deactivated manually.

If you want to unlock during wash, press both the SOIL LEVEL and the WASH/RINSE button
simultaneously again.

“          ”  & the remaining time are alternatively shown on the display while they are locked.

Turn Power on.

How to Lock

Press the POWER button

Press the START/PAUSE button to start washing.

Press both the SOIL LEVEL button and the WATER TEMP. button simultaneously.

When there is a fear of freezing

cleaning the Inside of your Washer

Close the water taps and remove the Water Supply Hose.
Remove the water which remains in the water supply.
Lower the drain hose and drain the water in the bowl and the drain hose by spinning.

If Frozen

Remove the water supply hose, and immerse it in HOT water at approx..40°C.
Pour approx..2 liters of HOT water at approx..40°C, into the bowl and let it stand for 10

minutes.

Connect the water supply hose to the water tap and confirm that the washing machine
performs the supply and drainage of water.

IIf you use fabric softener or do regular COLD water washing, it is very important that you
occasionally clean the inside of your washer.

Fill your washer with HOT water.
Add about two cups of a powdered Detergent that contains phosphate.
Let it operate for several minutes.
Stop the washer, open the lid and leave it to soak overnight.
After soaking, drain the washer and run it through a normal cycle.

Products that might damage your washing machine

Concentrated bleaches and diaper sanitizer will cause damage to the paintwork and components of
your washer.
Hydrocarbon solvents i.e. petrol, paint thinners and lacquer thinners, etc. can dissolve plastic and
blister paint
(Be careful when washing garments stained with these solvents as they are flammable DO NOT put
them in washer or dryer.) 
Some pretreatment sprays or liquids can damage your washer’s control panel.
Use of dyes in your washer may cause staining of the plastic components. The dye will not damage
the machine but we suggest you thoroughly clean your washer afterwards. We do not recommend
the use of dye strippers in your washer.
Do not use your washer lid as a work surface.

Leave the lid open after washing to allow moisture to evaporate. If you
want to clean the inner-tub use a clean soft cloth dampened with liquid
Detergent, then rinse. (Do not use harsh or gritty cleaners.)

Hoses connecting washer to faucet should be replaced every 5 years.

Immediately wipe off any spills. Wipe with damp cloth. Try not to hit
surface with sharp objects.

Be sure water supply is shut off at faucets. Drain all water from hoses if
weather will be below freezing.