LG WM2487HWM Service Manual ▷ View online
Wire Color
Blue Housing (YL-BK)
Red Housing (VT-BK)
White Housing (WH-BK)
Blue Housing (GY-BK)
Red Housing (BL-BK)
52
DISPENSER ASSEMBLY
NOISE FILTER
1
Disassemble the top plate assembly.
2
Pull out the drawer.
1
Disassemble two (or three) connectors from
the NOISE FILTER.
2
Unscrew a screw from the TOP BRACKET.
4
Unscrew the Clamp nut at the lower part of the
dispenser.
5
Disassemble the 4 connectors from the valves.
6
Unscrew 2 screws from the back of the cabinet.
3
Push out the DISPENSER ASSEMBLY after
unscrewing 2 screws.
1
2
3
4
5
53
CABINET COVER
1
Unscrew the 5 screws from upper of the canbinet
cover.
2
Unscrew the screw from filter cover.
3
Put a flat ( -) screwdriver or putty knife into the hinge
slots at the bottom of the cover and pry it out.
4
Unscrew the screw from the lower side of the cabinet
cover.
54
5
Open the door.
6
Disassemble the clamp assembly.
7
Tilt the cabinet cover.
8
Disconnect the door switch connector.
9
Lift and separate the cabinet cover.
10
Disassemble the clamp assembly.
11
Disassemble the gasket.
NOTE: When assembling the CABINET
COVER, connect the door switch connector.
55
①
① Open the door.
②
② Unscrew the 7 screws from the HINGE COVER.
③
③ Put a flat ( - ) screwdriver into the openng of the hinge,
and pull out the hinge cover.
④
④ Unscrew a screw from the lower side of door.
⑤
⑤ Disassemble the door upward.
DOOR
①
① Open the door and disassemble the CLAMP
ASSEMBLY.
②
② Unscrew the 2 screws.
DOOR LOCK SWITCH ASSEMBLY
※
※ Be careful! The door is heavy.
※
※ NOTE
• Reconnect the connector after replacing the
DOOR SWITCH ASSEMBLY.
Click on the first or last page to see other WM2487HWM service manuals if exist.