LG WM2487HWM Service Manual ▷ View online
28
DOOR OPEN ERROR
Is displayed?
Yes
Is the connector connected
to door switch or main PWB
disconnected?
to door switch or main PWB
disconnected?
Reconnect or
repair
the connector
repair
the connector
Yes
No
Is there clicking sound once
or twice when the
START/PAUSE button is
pressed to start the cycle?
or twice when the
START/PAUSE button is
pressed to start the cycle?
Replace the
PCB
ASSEMBLY.
PCB
ASSEMBLY.
No
Is DOOR SWITCH
ASSEMBLY broken?
ASSEMBLY broken?
Replace the
DOOR
SWITCH
ASSEMBLY.
DOOR
SWITCH
ASSEMBLY.
No
Yes
Does the spring of Latch
Hook actuate?
Hook actuate?
Replace
Door
Assembly
Door
Assembly
Yes
No
[Note] Environmental check list
1) The machine must operate with all the doors
1) The machine must operate with all the doors
completely closed and locked.
2) The washing area must operate with a water
temperature not higher than 45 Celsius and
must not have more amount of supplied water
than it should.
must not have more amount of supplied water
than it should.
29
UNBALANCE ERROR
OVER FLOW ERROR
[Note] Environmental check list
1) Removal of transportation-based fixed bolt.
2) Confirmation on the material to see if it is capable
1) Removal of transportation-based fixed bolt.
2) Confirmation on the material to see if it is capable
of handling two different types of blanket materials.
Is displayed?
Yes
Does the laundry lean
toward one side, not evenly
put in the DRUM assembly?
toward one side, not evenly
put in the DRUM assembly?
Put laundry
evenly
In the DRUM
assembly
evenly
In the DRUM
assembly
Yes
Is the washing machine
installed at an angle?
installed at an angle?
Adjust the
height of
washing
machine
to be kept
horizontally
height of
washing
machine
to be kept
horizontally
Yes
No
Is displayed?
Yes
When you press both
WASH/RINSE button and
DELAY WASH button
simultaneously, is the
water level frequency over
21.3kHz?
WASH/RINSE button and
DELAY WASH button
simultaneously, is the
water level frequency over
21.3kHz?
(Refer to 7-3)
Check the AIR
CHAMBER
and the tube
(clogged).
CHAMBER
and the tube
(clogged).
No
Does the inlet valve work
when the power is not
applied?
when the power is not
applied?
Replace the
INLET VALVE ASSEMBLY
INLET VALVE ASSEMBLY
If the inlet
valve work
continuously
when the power
is applied,
Replace the
MAIN PWB
ASSEMBLY
valve work
continuously
when the power
is applied,
Replace the
MAIN PWB
ASSEMBLY
No
Yes
Yes
30
PRESSURE SENSOR ERROR
Is displayed?
Yes
Is the connector connected
to pressure sensor
disconnected or
disassembled?
to pressure sensor
disconnected or
disassembled?
Reconnect or
repair
the connector
repair
the connector
No
No
Yes
Is the resistance of the
pressure sensor out of
range?
(pin 1~ pin 3)
(21~23
pressure sensor out of
range?
(pin 1~ pin 3)
(21~23
Ω ±10%)
Replace the
pressure
switch
pressure
switch
No
Yes
Is the AIR CHAMBER and
the tube clogged?
the tube clogged?
Replace the MAIN PWB
assembly.
assembly.
Fix the air
chamber
and remove
the foreign
material.
chamber
and remove
the foreign
material.
Yes
31
8-5. TROUBLE SHOOTING ELSE
NO POWER
1. Be careful of electric shock if disconnecting parts while troubleshooting.
2. First of all, check the connection of each electrical terminal with the wiring diagram.
3. If you replace the MAIN PWB ASSEMBLY, reinsert the connectors correctly.
2. First of all, check the connection of each electrical terminal with the wiring diagram.
3. If you replace the MAIN PWB ASSEMBLY, reinsert the connectors correctly.
CAUTION
Check the
fuse or reset
the circuit
breaker
fuse or reset
the circuit
breaker
Yes
No
Is the current rating of
multi-outlet power strip
enough?
(Avoid connecting several
electric devices.)
multi-outlet power strip
enough?
(Avoid connecting several
electric devices.)
Is the supplied voltage
120V AC?(+10%, -15%)
120V AC?(+10%, -15%)
Alternate with
explanation
explanation
Yes
Yes
No
Is the connector connected
to PCB/Noise filter
disconnected or
disassembled?
to PCB/Noise filter
disconnected or
disassembled?
Reconnect
or repair
the connector
or repair
the connector
No
Replace the
MAIN PWB
ASSEMBLY
MAIN PWB
ASSEMBLY
Main LED
Yes
No
Is LED on while the power
is on?
is on?
Replace the
DISPLAY
PWB
ASSEMBLY
DISPLAY
PWB
ASSEMBLY
Display PWB
Connecting connector
MAIN PWB~ Display PWB
No
Is three pin wire of
display PWB broken?
display PWB broken?
Click on the first or last page to see other WM2487HWM service manuals if exist.