DOWNLOAD LG WM1375HW Service Manual ↓ Size: 2.91 MB | Pages: 35 in PDF or view online for FREE

Model
WM1375HW
Pages
35
Size
2.91 MB
Type
PDF
Document
Service Manual
Brand
Device
Washing Machine
File
wm1375hw.pdf
Date

LG WM1375HW Service Manual ▷ View online

20
NO
YES
NO
NO
YES
NO
YES
YES
NO
NO
YES
YES
YES
NO
NO
NO
YES
MAX
max
M
A
X
Detergent
for wash
Fabric
softener
Liquid
Bleach
Is water supply shut-off?
Is the tap opened?
When you press both Wash/Rinse button and
Spin Speed button simultaneously, is the water
level frequency below 240?
Is the inlet valve filter clogged?
Is resistance between each terminal of INLET
VALVE ASSEMBLY is 0.8~1.2
kΩ
?
Verify the voltage of the inlet valve connector is
120 V AC.
(Refer to 7-2 QC TEST MODE)
Is water supplied?
Are replaceptacles correctly connected to the
terminals of the INLET VALVE ASSEMBLY?
Is detergent put in the correct compartment of
the dispenser?
Is the detergent caked or hardened?
Open the tap.
Check the AIR CHAMBER
and the tube (clogged).
Clean the filter.
Replace the INLET VALVE
ASSEMBLY.
Check electrical connection.
Replace the MAIN PWB
ASSEMBLY.
Refer to 
NO WATER SUPPLY
Check the wiring.
Put the detergent in the
correct position 
MAIN WASH
: Detergent 
Clean the dispenser. 
NO WATER SUPPLY
DETERGENT DOES NOT FLOW IN
21
NO
NO
NO
YES
YES
YES
YES
MAX
max
M
A
X
Detergent
for wash
Fabric
softener
Liquid
Bleach
YES
YES
YES
NO
NO
SOFTENER/BLEACH DOES NOT FLOW IN
Refer to
NO WATER SUPPLY
Check the wiring.
Put it in the correct
compartment.
Clean the cap and
container. 
Is water supplied?
Are receptacles correctly connected to the terminals
of the INLET VALVE ASSEMBLY?
Is softener/bleach put in the correct compartment of
the dispenser?
Is the softener/bleach cap clogged?
ABNORMAL SOUND
Fix the nut tightly.
Replace the V-belt
(4400FR3116A)
Replace the motor.
Is the pulley nut loosened?
Is the belt worn?
Is there friction noise coming from the motor?
22
AC 120V
PWB ASSEMBLY (MAIN)
PWB ASSEMBLY (MAIN)
(1)
(2)
Replace the
SENSOR SWITCH
ASSEMBLY.
Replace the MAIN PWB
ASSEMBLY
Repair the DRAIN HOSE
ASSEMBLY.
Remove foreign material.
Reconnect or repair the
connector
Repair the DRAIN PUMP
ASSEMBLY.
Repair the MAIN PWB
ASSEMBLY.
When pressing Delay Wash and Stain Cycle at the
same time after draining, is the water level
frequency 255?
When pressing and Spin Speed buttons
at the same time while washing, is the water level
frequency between 230 - 243 ?
Check the voltage between two pins while
pressing the POWER button. Is the voltage 
120 V AC?
Is the drain hose twisted or frozen?
Is the impeller of the drain pump clogged?
Is the connector disconnected  or disassembled.
Is the resistance of the drain pump coil too high or
low? (resistance of the coil is 10-20 Ω)
When checking voltage between connectors
during spin, is the voltage 120 V AC as in the
figure?
HEATING WITHOUT WATER
D R A I N   M A L F U N C T I O N I N G
23
 washing, is the voltage
120 V AC?
Soak,
MAIN PWB ASSEMBLY.
Check electrical connection.
Replace THERMISTOR.
YELLOW
RED
AC 120V
PWB ASSEMBLY (MAIN)
Push the THERMISTOR
tightly to the rubber.
When checking THERMISTOR on the tub, is the
THERMISTOR loosened?
Extra Hot : 70°C
Hot : 50°C
Warm : 35°C
Cold : 20°C
HEATING CONTINUOUSLY ABOVE 
THE SETTING WATER TEMPERATURE
Page of 35
Display

Click on the first or last page to see other WM1375HW service manuals if exist.