DOWNLOAD LG WF-D1617DD Service Manual ↓ Size: 3.69 MB | Pages: 54 in PDF or view online for FREE

• When the Air dry is selected other buttons will be inactive.
• If you want to cancel the Air dry function, press the Power button.

AIR DRY for your laundary.

Press the POWER (AUTO OFF) button to turn power on.

When you press the Air dry button for 3 seconds, the Air dry course will be selected.

When the Complete buzzer goes off, the power will automatically be turned off in 10 seconds.

Press the START/PAUSE button.

When you select Air dry foir more than 60 minutes
1) You can reduce the drying time by minimizing the moisture in the laundry.
2) Always keep the laundry amount to 2kg or less and make sure to spread it out evenly.
3) Select 60 minutes for cotton laundry and 120 minutes for synthetic fiber laundry for effective moisture removal.

• When you select the Tub Dry, do not put any laundry in the drum.
• When Tub Dry is selected, other buttons will be inactive.

Press the POWER (AUTO OFF) button.

When you press the Wash and Rinse button simultaneously, the Tub Dry course will be
set or canceled.

When the Complete buzzer goes off, the poser will automatically be turned off in 
10 seconds.

Press the START/PAUSE button.

When you select Tub Dry
1) Use this function to minimize the growth of mold from the residual moisture within the laundry.
2) When you select the Tub Dry course, do not put any laundry or detergent in the drum.
3) It is good to use this about once a week.

When you only need the Wash, Wash/Rinse or Rinse cycles, these can be set manually.

Press the WASH button to
select the desired timing.

Press the RINSE button to
select the desired times of
rinse.

Press the SPIN button to
select the desired spin
duration time.

When you want to only drain,
wait until the water in the
washing tub drains
completely. 

• When a Wash, Wash/Rinse or Rinse only option is selected, after the wash is completed the water will not be

drained off. If you wish to drain the water, press SPIN button and wait until the water in the tub has drained
completely. Then press the START/PAUSE button.

• If you do not specify the water level, then Medium will be automatically selected.
• If only Rinse is selected, the process will start from Water Supply.

Press the POWER (AUTO OFF) button to turn power on.

Press the WATER LEVEL button, to control the water level according to the amount of
laundry. If you do not choose anything, it is set the middle water level automatically.

Add the laundry into the washing tub.

Add the detergent and close the lid.

Press the START/PAUSE button.

Press the WASH button to
select the desired timing.

Press the RINSE button to
select the desired times of
rinse.

You can use this option to
reduce the wrinkling of
garments

Press the RINSE button to
select the desired times of
rinse.

Press the SPIN button to
select the desired spin
duration time.

• “         ” & the remaining time are alternatively shown on the display while they are locked. 
• All buttons will be inactive whilst the child lock is engaged. The child lock cannot be activated when the

unit is in the stand by mode.

Press the POWER (AUTO OFF) button.

Press both the RINSE button and the SPIN button simultaneously.

Press the START/PAUSE button to start washing.

If you want to lock all the keys to prevent settings from being changed by a child, you can use the
child lock option.

If you want to unlock during wash, press both the RINSE and the SPIN button simultaneously again.

• Turn Power on.

• After all washing conditions are set according to the manual.

• During the wash program, all the buttons are locked until washing

is completed or until the child-lock function is deactivated
manually. 

If you use fabric softener or do regular COLD water washing, it is very important that you occasionally clean
the inside of your washer.

• Fill your washer with HOT water.
• Add about two cups of a powdered Detergent that contains phosphate.
• Let it operate for several minutes.
• Stop the washer, open the lid and leave it to soak overnight.
• After soaking, drain the washer and run it through a normal cycle without adding any detergent or clothes.

Or use TUB CLEAN PROGRAM periodically.
We do not recommend that you wash clothes during this procedure.

• Concentrated bleaches and diaper sanitizer will cause damage to the paintwork and components of your washer.
• Hydrocarbon solvents i.e. petrol, paint thinners and lacquer thinners, etc. can dissolve plastic and blister paint 

(Be careful when washing garments stained with these solvents as they are flammable DO NOT put them in
washer or dryer without presoaking and rinsing them first.)  

• Some pretreatment sprays or liquids can damage your washer’s control panel. 
• Use of dyes in your washer may cause staining of the plastic components. The dye will not damage the machine

but we suggest you thoroughly clean your washer afterwards. We do not recommend the use of dye strippers in
your washer.

• Do not use your washer lid as a work surface.

• Close the water taps and remove the Water Supply Hose. 
• Remove the water which remains in the water supply. 
• Lower the drain hose and drain the water in the bowl and the drain hose by spinning.

• Remove the water supply hose, and immerse it in HOT water at approx.. 40°C.
• Pour approx.. 2 liters of HOT water at approx.. 40°C, into the bowl and let it stand for 10 minutes. 
• Connect the water supply hose to the water tap and confirm that the washing machine performs the

supply and drainage of water.

Leave the lid open after washing to allow moisture to evaporate. If you want to clean
the inner-tub use a clean soft cloth dampened with liquid Detergent, then rinse. (Do
not use harsh or gritty cleaners.) 

It is recommended to replace the inlet hoses to the tap every 5 years.

Immediately wipe off any spills. Wipe with damp cloth. Try not to hit surface with sharp
objects.

Be sure water supply is shut off at the tap. Drain all water from hoses if weather will be
below freezing.