DOWNLOAD LG WD-BABYLUV1 Service Manual ↓ Size: 41.62 MB | Pages: 44 in PDF or view online for FREE

Model
WD-BABYLUV1
Pages
44
Size
41.62 MB
Type
PDF
Document
Service Manual
Brand
Device
Washing Machine
File
wd-babyluv1.pdf
Date
PREV: LG WD-B12337D9 Service Manual

LG WD-BABYLUV1 Service Manual ▷ View online

Clean  the  drawer  and  dispenser.
Check  point
YES
32
Water  Leak
Is  detergent  &  softener  put  in  
the  correct  compartment  of  the  drawer?  
NO
Put  it  in  the  
Correct  Position
.
Replace  the  
Dispenser  Tray
.
Reference  (Amount  of  Detergent  &  Softener)
Detergent
NO!!
OK!!
Is  the  
Dispenser  Tray
Damaged  or  warped?
1.  Water  Leak  from  Dispenser
Is  the  
Detergent
caked or  hardened ?
Main  Wash
(Powder)
Pre  Wash
(Powder)
Only
softener
Softener
YES
YES
NO
NO
33
2.  Water  Leak  from  Dispenser
Are  the  gasket  (seal)  
and  door  cleaned  regularly?
Is  the  door  or  gasket  damaged?
Are  the  inlet  hoses  loose  or  cracked/split?
Replace  the  damaged  parts.
Replace  the  
Inlet  Hoses
.
Clean  the  periphery  of  
Gasket
and  
Door  
regularly.
3.  Unknown  –  Water  on  Floor  
YES
Is  the  washer  horizontal  ?
Adjust  the  height  of  washing  machine  to  be  kept
horizontally.  (Page  7)
NO
Are  the  drain  filter  and  manual
drain  hose  open?
YES
NO
Check!!
Turn  the  filter  cap  clockwise  to  close.
YES
YES
NO
34
9. DISASSEMBLY  INSTRUCTIONS
Be  sure  to  unplug  the  machine  out  of  the  outlet  before  disassembling  and  repairing  the  parts.
CONTROL  PANEL
1
Unscrew  2  screws  on  the  back  of  the  top  plate.
2
Pull  the  top  plate  backward  and  upward  as
shown.
1
Disconnect  the  PWB  assembly  connector  from
Main  lead  wire  assembly.
2
Pull  out  the  drawer  and  unscrew  2  screws.
3
Push  upper  hooks  down  on  the  top  and  pull
the  control  panel.
1
Disconnect  the  PWB  assembly  (Main  &  Display)
from  control  panel  by  unscrewing  7  screws.
PLATE  ASSEMBLY  (TOP)
PANEL  ASSEMBLY
(CONTROL)
Hook
35
1
Disassemble  the  top  plate  assembly.
2
Pull  out  the  drawer  to  arrow  direction.
3
Unscrew  2  screws.
1
The  hose  clamps  and  the  hose  are
disassembled.
1
The  ventilation  bellows  and  the  water  inlet
bellows  are  disassembled  on  the  tub.
DISPENSER  ASSEMBLY
DISPENSER  ASSEMBLY
PUSH
DRAWER
Option
Page of 44
Display

Click on the first or last page to see other WD-BABYLUV1 service manuals if exist.

RANDOM: