LG WD-90KFT Service Manual ▷ View online
■ HOW TO CONNECT INLET HOSE
• Check that the rubber packing is inside of the
valve connector.
• Connect the inlet hose firmly to prevent leak.
■ CONNECT DRAIN HOSE
■ CONNECT POWER PLUG
8
· Make sure that the hose is not twisted.
※ The drain hose should be placed under 100cm from the floor.
· Connect the power plug to the wall outlet.
· Avoid connecting several electric devices,
It may be the cause of the fire.
· Avoid submerging the end of the hose.
TEST OPERATION
9
Power
Start
/
Pause
Power
•Connect the power plug to
the outlet.
•In case of Coloreds program.
•Connect the inlet hose.
Preparation for
Press the POWER button.
Press the Start/Pause
washing.
button.
·Press the Temp. button
·Check if the drum rotates
·Check if water is supplied
and the present temperature will
clockwise and counterclockwise.
through the detergent dispenser.
be displayed.
·Power off and then power on.
·Check if the door can be
·Check if the door can be
opened after 3 minutes.
·Turn off Wash and Rinse after
pressing the Start/Pause button
and start the machine again.
and start the machine again.
·Check drain and spin.
·If SVC is needed during
check, remove
the remaining water by pulling
out the hose cap.
Check the water heating.
Check automatic reverse
Check the water supply.
turn.
Check drain and spin
Power off and open the
Water removal
door
10
5. OPERATION
11
ON/OFF button
• If the laundry is heavily soiled
“Intenive” option is effective.
• By selecting the Intensive
option, the wash time may be
extended, depending on the
program selected.
extended, depending on the
program selected.
• To use this option press the
Intensive button once before
the wash program is started.
the wash program is started.
• Dry programs selected by
pressing the Dry button.
• By pressing the button
[Cupboard - Very - Time -
Low Temp.- Iron] can be
selected.
Low Temp.- Iron] can be
selected.
Click on the first or last page to see other WD-90KFT service manuals if exist.