LG WD-90KFT Service Manual ▷ View online
① Remove pump outlet hose.
② Remove tub pump bellows.
③ Remove cap(Remaining Hose).
④ Disconnect the wiring.
⑤ Three screws are unscrewed from the cabinet.
⑥ Remove the pump to arrow direction.
① Loosen the nut.
② Remove washing heater by pulling out.
When assembling the washing heater, insert
the heater to heater clip on the bottom of tub.
the heater to heater clip on the bottom of tub.
① Pull it out by holding the thermistor bracket.
If holding the wire and pulling out it, it may be
broken.
PUMP
HEATER
THERMISTOR
Cap
(Remaining Hose)
Screw
Pump Outlet Hose
Tub Pump Bellows
Washing
Heater
Heater
Ring Terminal
Nut
Thermistor
Bracket
Bracket
Thermistor bulb
CAUTION
36
① The cabinet cover clamp is removed and the
gasket is released.
② Two screws are unscrewed.
③ The door lock S/W is disconnected form the
wiring connector and the strap.
① Remove washing heater.
② Remove the foreign object(wire,coin,etc) by
inserting long bar in the hole.
SWITCH ASSY, DOOR LOCK
WHEN FOREIGN OBJECT STUCK BETWEEN DRUM AND TUB
37
① Remove 6 screws and dry fan assembly.
② Remove 7 screws and dry duct upper.
① Remove 2 screws and dry heater.
② Remove thermostat.
① Remove 17 screws from Dry duct upper and
Dry fan Assembly.
① Remove 5 screws and condensing duct.
DRY DUCT
CONDENSING DUCT
Dry fan
Ass'y
Ass'y
Dry Duct
Upper
Dry Heater
Thermostat
38
10-1.THE PART LIST OF CABINET ASSEMBLY
10. EXPLODED VIEW AND PART LIST
A101
A100
A201
A220
A310
A133
A130
A141
A103
A104
A102
A110
A200
A300
A430
A485
A140
A150
A152
A154
A153
A151
A155
A450
A410
A134
A440
A303
A275
A276
A131
39
Click on the first or last page to see other WD-90KFT service manuals if exist.