LG WD-3243RHD / WD-3245RHD Service Manual ▷ View online
32
※ When the power cord is plugged,the door can
be opened by pressing the DOOR OPEN
button
button
Open the door completely.
Remove the two screws from the hinge.
Pull the strap.
Rotate the Cap(Remaining Hose) to arrow
direction.
Pull it out from hose.
※ First, prepare a bucket to put in the remained
water.
Cap(Remaining Hose)
DOOR
STRAP
Door opening method in case of no electricity
Removing method of remained water
33
The cabinet gasket clamp is released.
Two screws are unscrewed from the cabinet
cover.
cover.
One screw is unscrewed from the lower cover.
The lower cover is disassembled by pulling
out.
out.
Three screws are unscrewed from the cabinet.
The control panel is removed.
Screw is unscrewed from the cabinet cover.
Cap
(Remaining Hose)
GASKET ASSEMBLY
34
Remove tub gasket clamp by loosening the
screw.
screw.
Remove dry gasket clamp by loosening the
screw.
screw.
When reassembling the gasket, put the drain
hole of the gasket downward, then assemble.
hole of the gasket downward, then assemble.
Dry
Gasket
Clamp
Gasket
Clamp
Tub Gasket
Clamp
Clamp
Drain Hole
35
Remove the back cover.
After loosening the bolt, Rotor, pull out the
rotor.
Remove the 6 bolt from the stator.
Disconnect the 2 connectors.
Remove the bolts at the Tub.
The Hinge (Damper) at the base is pulled off
pressing on the snaps at the sharp end.
pressing on the snaps at the sharp end.
The hinge at the base is pulled off.
(To arrow direction)
PULLEY, MOTOR, DAMPER
Rotor
Bolt
Friction
Damper
Damper
Bolt
Hinge
(Damper)
(PULLEY)
(MOTOR)
(FRICTION DAMPER)
HOW TO ASSEMBLE THE MOTOR
Click on the first or last page to see other WD-3243RHD / WD-3245RHD service manuals if exist.