LG WD-15CFD Service Manual ▷ View online
29
Is the connector loose?
[(1) - Yellow, 3pin (2) - Red 6pin]
[(1) - Yellow, 3pin (2) - Red 6pin]
30
1.
Unscrew 7 screws on the Rear Frame.
2.
Disassemble the Rear Cover.
3.
Pull the Control Panel forward.
4.
Disconnect the connectors.
5.
Unscrew 5 screws.
6.
Disassemble the Controller Assembly.
1.
Open the Dispenser Lid.
2.
Unscrew 4 screws.
3.
Disassemble the Lid Assembly.
4.
Pull down the Dispenser by pushing the hooks.
5.
Reach through the dispenser hole
and hold the top plate.
6.
Push backward using an opener
and lift the Top Plate.
9. DISASSEMBLY INSTRUCTIONS
Disassemble and repair the unit only after pulling out power plug from the outlet.
LID
Do first left side ( ).
31
1.
Disassemble the 5 Hose Clamps.
2.
Release the 5 Hoses.
3.
Mark the hoses for correct reassembly.
4.
Unscrew the Nut at the lower
part of the Dispenser.
5.
Unscrew the 4 screws on the Holder.
6.
Disassemble the 5 Connectors from the Valves.
1.
Unscrew the screw from the Top Plate.
2.
Unplug the 2 Connectors.
Wire color :
WH-BK
OR-BK
WH-BK
GY-BK
BL-BK
YL-BK
32
1.
Unscrew the 2 screws from upper side of the
Cabinet Cover.
2.
Unscrew the screw from the Filter Cover.
3.
Put a flat (–) screwdriver into the both sides of
the Filter Cover and pull it out.
4.
Unscrew the 2 screws from the lower side of the
Cabinet Cover.
Click on the first or last page to see other WD-15CFD service manuals if exist.