LG WD-12125RD Service Manual ▷ View online
HOW TO CONNECT INLET HOSE
Check that the rubber packing is inside of the
valve connector.
Connect the inlet hose firmly to prevent leak.
CONNECT DRAIN HOSE
CONNECT POWER PLUG
8
Make sure that the hose is not twisted.
The drain hose should be placed under 100cm from the floor.
Connect the power plug to the wall outlet.
Avoid connecting several electric devices,
It may be the cause of the fire.
Avoid submerging the end of the hose.
TEST OPERATION
9
Power
Start
/
Pause
Power
Connect the power plug to
the outlet.
In case of Coloreds program.
Connect the inlet hose.
Preparation for
Press the POWER button.
Press the Start/Pause
washing.
button.
Press the Temp. button
Check if the drum rotates
Check if water is supplied
and the present temperature will
clockwise and counterclockwise.
through the detergent dispenser.
be displayed.
Power off and then power on.
Check if the door can be
opened after 3 minutes.
Check if the door can be
opened after 3 minutes.
Turn off Wash and Rinse after
pressing the Start/Pause button
pressing the Start/Pause button
and start the machine again.
Check drain and spin.
If SVC is needed during
check, remove
the remaining water by pulling
out the hose cap.
Check the water heating.
Check automatic reverse
Check the water supply.
turn.
Check drain and spin
Power off and open the
Water removal
door
10
5. OPERATION
5-1) OPERATION-1
11
Click on the first or last page to see other WD-12125RD service manuals if exist.