LG WD-12125RD Service Manual ▷ View online
32
① The back cover is removed.
② Two screws are unscrewed.
③ Disconnect connector from the wiring.
④ Pull the PWB assembly (Main) to arrow
direction.
① The plate assembly(Top)and the
cover(lnner)are disassembled.
② Pull the drawer to arrow direction.
③ Two screws are unscrewed.
① The hose clamps and the hose are
disassembled.
② The ventilation bellows are disassembled on
the tub.
PWB ASSEMBLY(POWER)
DISPENSER ASSEMBLY
DISPENSER ASSEMBLY
DRAWER
33
① Disconnect the wiring connector.
② Remove the valve by two screws of the valve
holder.
When reconnecting the connector
2
1
3
4
INLET VALVE
VALVE
(DRY)
YL/BK - BK
VALVE
(PRE-WASH)
GY/WH - BK
VALVE
(NORMAL-WASH)
WH/BK - BK
VALVE ®È (NORMAL-WASH)
BL/RD - BK
VALVE
(HOT)
BL/RD - BK
① Remove the lower cover to arrow direction
after one screw is unscrewed.
COVER LOWER
34
① Open the door completely.
② Remove the two screws from the hinge.
※ When removing the Door Assembly, it is
necessary to hold the Bracket that is inner of
the Cabinet Cover.
the Cabinet Cover.
① Rotate the Cap(Remaining Hose) to arrow
direction.
② Pull it out from hose.
※ First, prepare a bucket to put in the remained
water.
Cap(Remaining Hose)
DOOR
Removing method of remained water
35
① The cabinet gasket clamp is released.
② Two screws are unscrewed from the cabinet
cover.
① One screw is unscrewed from the lower cover.
② The lower cover is disassembled by pulling
out.
③ Three screws are unscrewed from the cabinet.
① The control panel is removed.
② Screw is unscrewed from the cabinet cover.
Cap
(Remaining Hose)
GASKET ASSEMBLY
Click on the first or last page to see other WD-12125RD service manuals if exist.