DOWNLOAD LG T1209DB / T1209DS / T1409DB / T1409DS Service Manual ↓ Size: 3.67 MB | Pages: 57 in PDF or view online for FREE

DELAY START (RESERVATION) Wash is used to delay the finishing time of the operation. 
The hours to be delayed can be set by the user accordingly. 
The time on the display is the finishing time, not  the start time. 

• Finishing time can be delayed from 3~48 hours. Delaying from 3~12 hours can be done in 1 hour time

intervals and from 12~48 hours in 2 hour time intervals. 

• If the lid is open, the machine will not work, and  an alarm signal will alarm to remind you to close the lid. 
• To select washing time, rinsing times, spinning time, water level, hot/cold or wash power manually, press the

DELAY START (RESERVATION) button and select the desired option. Then press the START/PAUSE button. 

• When the laundry cannot be taken out immediately after the wash program ends, it is better to omit the

spinning program. (The laundry will be wrinkled if left for a long time after spinning.)

Press the POWER (AUTO OFF) button to turn power on.

Press the PROGRAM button to select the washing program.

Press the DELAY START (RESERVATION) button.

Add the detergent to the dispenser draw.

Add the laundry and press the START/PAUSE button.

• Select the program for laundry on the Control panel. 

This program will not work in WOOL and TUB CLEAN Program.

• The light will ‘DELAY’ turn on and ‘TIME  LEFT’                   will be

marked.

• Press the button repeatedly to set the desired finishing time. 

For example, To finish washing in 9 hours from now, press the
DELAY START button repeatedly until 9:00 appears in the display.

(RES.=DELAY)

• The appropriate quantity of Detergent marked next to the

WATER of WATER DETERGENT. 

• When the lid is open the machine will not operate, and an

alarm signal will remind you to close the lid 

• When you press the START/PAUSE button the light will blink.

Close the lid. 

Finish

• Water will then be let in again to supplement the load 2 minutes

after the wash has commenced to supplement the water the
laundry has absorbed.

• The washing will be finished according to the delayed time.

• When the Air dry is selected other buttons will be inactive.
• If you want to cancel the Air dry function, press the Power button.

AIR DRY can be used to further remove moisture after the wash cycle by subjecting the load to air
currents within the machine. This function will not dry clothes completely and should only be used for
loads under 2 kg.

Press the POWER (AUTO OFF) button to turn power on.

When you press the Air dry button for 3 seconds, the Air dry course will be selected.

Closed the lid.

Press the START/PAUSE button.

When you select Air dry foir more than 60 minutes
1) You can reduce the drying time by minimizing the moisture in the laundry.
2) Always keep the laundry amount less than 2kg and make sure to spread the load out evenly.
3) Select 60 minutes for cotton laundry and 120 minutes for synthetic fiber laundry for effective moisture removal.

When you only need the Wash, Wash/Rinse or Rinse cycles, these can be set manually.

Press the WASH button to
select the desired timing.

Press the RINSE button to
select the desired times of
rinse.

Press the SPIN button to
select the desired spin
duration time.

When you want to only drain,
wait until the water in the
washing tub drains
completely. 

• When a Wash, Wash/Rinse or Rinse only option is selected, after the wash is completed the water will not be

drained off. If you wish to drain the water, press SPIN button and wait until the water in the tub has drained
completely. Then press the START/PAUSE button.

• If you do not specify the water level, then Medium will be automatically selected.
• If only Rinse is selected, the process will start from Water Supply.

Press the POWER (AUTO OFF) button to turn power on.

Press the WATER LEVEL button, to control the water level according to the amount of
laundry. If you do not choose anything, it is set the middle water level automatically.

Add the laundry into the washing tub.

Add the detergent and close the lid.

Press the START/PAUSE button.

Press the WASH button to
select the desired timing.

Press the RINSE button to
select the desired times of
rinse.

You can use this option to
reduce the wrinkling of
garments

Press the RINSE button to
select the desired times of
rinse.

Press the SPIN button to
select the desired spin
duration time.

• “         ” & the remaining time are alternatively shown on the display while they are locked. 
• All buttons will be inactive whilst the child lock is engaged. The child lock cannot be activated when the

unit is in the stand by mode.

Press the POWER (AUTO OFF) button.

Press both the RINSE button and the SPIN button simultaneously.

Press the START/PAUSE button to start washing.

If you want to lock all the keys to prevent settings from being changed by a child, you can use the
child lock option.

If you want to use the washing machine without the chime sounds, press both the WASH and SPIN
buttons simultaneously. 
To reinstate the chime function, press both the WASH and SPIN buttons simultaneously one more time.

To see the remaining time for each process, press one of the WASH, RINSE and SPIN buttons. 
The remaining time for each process will appear for about 1 second.

If you want to unlock during wash, press both the RINSE and the SPIN button simultaneously again.

• Turn Power on.

• After all washing conditions are set according to the manual.

• During the wash program, all the buttons are locked until washing

is completed or until the child-lock function is deactivated
manually.