DOWNLOAD LG SP105 Service Manual ↓ Size: 5.66 MB | Pages: 45 in PDF or view online for FREE

MEDICAL 90

NORMAL 75

NORMAL 60

NORMAL 40

Extra Hot/Cold

Extra Hot/Cold

Hot/Cold

Warm/Cold

High

High

High

High

DELICATES 30

Cold/Cold

Low

7. WIRING DIAGRAM/PROGRAM CHART 

NON COIN TYPE

Pogram Chart

8. TROUBLESHOOTING

8-1. BEFORE PERFORMING SERVICE

8-2. QC TEST MODE.

Be careful of electric shock when disconnecting parts while troubleshooting.

Non Coin Type 

The washer must be empty.

1. Push the MEDICAL 90 and NORMAL 60 button at the same time. 
2. Push the NORMAL 75 button 3 times.
3. Push the START button.

8-3. HOW TO CHECK THE WATER LEVEL FREQUENCY

8-4. HOW TO CHECK THE RPM

Press and hold the ADD SUPER WASH and PERMANENT PRESS buttons simultaneously.

Press the ADD SUPER WASH AND WHITES button simultaneously.

When you check the water level, the first digit is a 0 which means 2. 

A display indicating 041 is a water level frequency of 241 multiplied by 0.1 KHz , for an

actual frequency of 24.1 KHz. 

Under 200 rpm: The display indicates the rpm. (Under 200 rpm) 

Over 200 rpm: The display indicates the rpm. (x 10 rpm)

So, for example a display indicating 050 : rpm of 050 x 10 rpm = 500rpm 

The voltage of each terminal is 220V~ when the unit is plugged in.

Number of times the 

START button is pressed

y

a

l

p

s

i

D

t

n

i

o

P

 

k

c

e

h

C

None
1 time

2 times
3 times
4 times
5 times
6 times
7 times
8 times
9 times

11 times

13 times
14 times
15 times
16 times
17 times

Turns on all lamps and locks the door

Displayed EU XX and US XX alternately

(Version)

(Version)

rpm (40~50)
rpm (600)
rpm (1000)
Water level frequency (261~)
Water level frequency (261~)
Water level frequency (261~)
Water level frequency (261~)
rpm (40~50)

Water level frequency (261~)

Displayed EU XX and US XX alternately
Displayed EU XX and US XX alternately
rpm (1000)

Tumble Clockwise.
Low Speed Spin
High Speed Spin
Inlet valve for main water turns on.
Inlet valve for hot wash turns on.
Inlet valve for softener turns on.
Inlet valve for bleach turns on.
Tumble counter clockwise.

10 times

Displayed 0XX

Turn on the heater. 
Drain Pump turns on.

12 times

Displayed 0XX

Turn on the Circulation Pump. 

Turns on all lamps.
Button Checks.
High Speed Spin

PDA Signal Check

This function is not applied in this machine

8-5. ERROR DISPLAY

If you press the START button when an error is displayed, any error except      will disappear and the 
machine will go into the pause status.

WATER INLET

ERROR

• Correct water level (246) is not reached within 8 minutes

after water is supplied or it does not reach the preset water
level within 25 minutes.

• The load is too small.
• The appliance is tilted.
• Laundry is gathered to one side.
• Non distributable things are put into the drum.

IMBALANCE

ERROR

• Not fully drained within 10 minutes.

DRAIN

ERROR

• Water is overflowing (water level frequency is over 213).

If               is displayed, the drain pump will operate to
drain the water automatically.

OVER FLOW

ERROR

• The SENSOR SWITCH ASSEMBLY is out of order.

PRESSURE

SENSOR 

ERROR

• Door not all the way closed.
• Loose electrical connections at Door switch and 

PWB Assembly.

• The DOOR SWITCH ASSEMBLY is out of order.

DOOR OPEN

ERROR

• The THERMISTOR is out order.

HEATING

ERROR