LG F1695RDH Service Manual ▷ View online
61
FRONT GASKET
Disassemble top plate assembly.
Needed tools : (
) Clamp Jig, (+) Electric driver
Disassemble control panel assembly.
Disassemble lower cover assembly.
Disassemble cabinet cover assembly.
Disassemble front gasket clamp using clampjig.
7
Take out gasket hole parts from the hook
of tub cover (Direction of 11:00, 9:00,
7:00, 6:00, 5:00, 3:00 and 1:00 o’clock ).
of tub cover (Direction of 11:00, 9:00,
7:00, 6:00, 5:00, 3:00 and 1:00 o’clock ).
8
Take out upper part of the front gasket
from the dry duct hole of the tub cover.
from the dry duct hole of the tub cover.
9 Disassemble front gasket.
1
2
3
5
Disassemble Duct assembly.
4
6
62
FRICTION DAMPER ASSEMBLY (RIGHT SIDE)
Disassemble the right side cabinet.
Needed tools : Damper pin Jig, long nose, (+) Electric driver
Remove 2 damper holders from the tub
bracket and the base holder.
bracket and the base holder.
Disassemble friction damper assembly.
SUSPENSION ASSEMBLY (RIGHT SIDE)
The right side cabinet is disassembled.
Needed tools :12,13 mm wrench, (+) Electric driver
Disassemble nut, (Suspension – Base
Cabinet)
Cabinet)
Remove suspension bolt.
Disassemble suspension assembly.
1
2
3
1
2
3
4
63
TUB BRACKET(RIGHT SIDE)
Disassemble the top plate assembly.
Disassemble the control panel assembly.
Disassemble the lower cover assembly.
Disassemble the cabinet cover assembly.
Disassemble the right side cabinet assembly.
Remove the bolt that fastens the suspension assembly to the
tub bracket.
tub bracket.
Remove the damper holder that connects the damper
assembly to the tub bracket.
assembly to the tub bracket.
Remove 4 screws that fasten the tub bracket to the weight.
Disassemble the tub bracket.
Needed tool : 12,13mm wrench, (+) Electric driver
1
2
3
4
5
6
7
8
9
64
VIBRATION SENSOR ASSEMBLY
Needed tools :Nipper, Cable Tie, (+) Electric driver
Disassemble the rear cover.
Remove a cable tie.
Disassemble vibration senser assembly.
1
2
3
Click on the first or last page to see other F1695RDH service manuals if exist.