LG F1695RDH Service Manual ▷ View online
53
5 Disconnect the wiring connectors between the
multi harness and the control panel assembly.
6 Disassemble the control panel assembly.
1 Disassemble the top plate assembly.
2 Pull the drawer panel assembly out.
4 Unfasten the screws from the parts displayed
in the fig.
7 Unfasten the screws from the parts displayed in
the fig.
8 Disassemble the lower cover assembly.
9 Unfasten the screws from the parts displayed in
the fig.
3 Unfasten the screws from the parts displayed
in the fig.
CABINET COVER ASSEMBLY
Screws
Connectors
Screws
2
1
54
1
2
1 Unfasten the screws from the cabinet cover
assembly.
3 Disconnect the locker switch assembly from the
multi harness.
2 Disassemble the cabinet cover assembly.
NOTE: When assembling the cabinet
cover assembly, connect the multi harness
to the door switch assembly.
cover assembly, connect the multi harness
to the door switch assembly.
LOCKER SWITCH ASSEMBLY
10 Disassemble the cabinet cover assembly by
pulling the lower part of the cabinet cover
assembly first and then lift it up.
assembly first and then lift it up.
55
Screws
1 Disconnecting the wiring Heat Duct.
2 Unfastened the screws from the tub.
1 Unfastened the screws from Blower hosing.
Screw
2 Disassemble the 3in2 hose by disconnecting
the clamp from the inlet valve.
1 Disconnect the clamp from the inlet valve.
2 Unfastened the screws from the tub.
DUCT ASSEMBLY
3 IN 2 NOZZLE
FILTER, FILTER CLEAN NOZZLE
56
• V ~ U (8~11Ω)
• U ~ W (8~11Ω)
• W ~ V (8~11Ω)
• U ~ W (8~11Ω)
• W ~ V (8~11Ω)
Motor Stator
U V W
Hall Sensor
Ha
Hb
Common
• Common ~ Ha (5~15kΩ)
• Common ~ Hb (5~15kΩ)
• Common ~ Hb (5~15kΩ)
1 Remove the rear cover.
2 After loosening the bolt, pull out the rotor.
1 Remove the 6 bolts from the stator.
2 Disconnect the 2 connectors.
2 Disconnect the 2 connectors.
ROTOR ASSEMBLY, STATOR ASSEMBLY
1 Unfastened the screws from Blower hosing.
2 Disassemble the Fan motor assembly.
FAN MOTOR ASSEMBLY
Click on the first or last page to see other F1695RDH service manuals if exist.