LG F1252RD7 Service Manual ▷ View online
2-2.DETERMINE WASHING TIME BY FUZZY LOGIC
To get the best washing performance optimal time is determined by sensing of water temperature,
selected washing temperature and laundry amount.
2-3.WATER LEVEL CONTROL
● This model adopts a pressure sensor which can sense the water level in the tub.
● Water supply is stopped when the water level to the preset level, then washing program proceeds.
● Spinning does not proceed until the water in the tub reduces to a certain level.
● Water supply is stopped when the water level to the preset level, then washing program proceeds.
● Spinning does not proceed until the water in the tub reduces to a certain level.
2-4. DOOR CONTROL
● The door can be opened by pulling the door handle whenever washer is not in operation.
● When the cycle is completed, the DOOR LOCKED light will turn off.
● If a power failure has occurred while in operation, the door will unlock after 5 minutes.
● Clicking sounds can be heard when the door is locked/unlocked.
● When the cycle is completed, the DOOR LOCKED light will turn off.
● If a power failure has occurred while in operation, the door will unlock after 5 minutes.
● Clicking sounds can be heard when the door is locked/unlocked.
5
FUZZY
LOGIC
laundry
amount
amount
selected
washing
temperature
water
temperature
washing time
rinsing time
spin rhythm, time
the best
washing
performance
washing
performance
SENSING
PROCESSING
DETERMINATION
EFFECT
6
2-5. THE DOOR CAN NOT BE OPENED
2-8. WATER CIRCULATION
2-7. CHILD LOCK
2-6. DOOR LOCKED LAMP LIGHTS
When Washing and Rinsing function of shower at the upper part of Gasket.
When Washing, it continuously operates for 3 minutes and intermittently.
When Rinsing, it continuously operates after completion of water supply.
When Washing, it continuously operates for 3 minutes and intermittently.
When Rinsing, it continuously operates after completion of water supply.
While program is operating
When a power failed and power plug is taken out in operation
While Door Lock lights turn on.
While the motor is in the process of intertial rotating, through the operation is paused.
When a power failed and power plug is taken out in operation
While Door Lock lights turn on.
While the motor is in the process of intertial rotating, through the operation is paused.
When the frequency of water level is lower than 22.9 kHz
(It can be canceled when the frequency is more than 23.8 kHz)
When the temperature inside the tub is higher than 45 °∆C and water level is not 25.5 kHz.
(It can be canceled when the water level is 25.5 kHz or the temperature inside the tub is lower than 40°C)
(It can be canceled when the frequency is more than 23.8 kHz)
When the temperature inside the tub is higher than 45 °∆C and water level is not 25.5 kHz.
(It can be canceled when the water level is 25.5 kHz or the temperature inside the tub is lower than 40°C)
Use this option to prevent unwanted use of the washer. Press and hold the Wash and Rinse button for 3
seconds to lock/unlock control.
When Child lock is set, CHILD LOCK lights and all buttons are disabled except the Power button.
You can lock the washer while it is operating.
seconds to lock/unlock control.
When Child lock is set, CHILD LOCK lights and all buttons are disabled except the Power button.
You can lock the washer while it is operating.
7
3. PARTS IDENTIFICATION
Shipping Bolts
Drain Hose
Dispenser
Inlet Hose
Drum
Door
Lower Cover Cap
Drain Plug
Adjustable Feet
Drain Pump Filter
Power Plug
Control Panel
Spanner
Inlet hoss (1EA)
Accessorios
•
If the supply cord is damaged,
it must be replaced by the
manufacturer or its authorized
service technician in order to
avoid a hazard.
it must be replaced by the
manufacturer or its authorized
service technician in order to
avoid a hazard.
8
4. INSTALLATION
Before servicing ask troubles of customers.
Check the adjustment(power supply is 220-240V ac 50Hz, remove the transit bolts....).
Check the troubles referring to the trouble shooting.
Decide service steps referring to disassembly instructions.
And then, service and repair.
After servicing, operate the appliance whether it works OK or NOT.
•Remove the transit bolts
(4EA:
①)with supplied spanner.
•
Keep the transit bolts and
spanner for future use.
spanner for future use.
•
Insert the 4 caps
provided into the hole.
provided into the hole.
•Turn clockwise to raise;
counterclockwise to lower.
•Turn the leveling feet to adjust the
appliance.
STANDARD INSTALLATION
The appliance should be installed as follows:
REMOVE THE TRANSIT
BOLTS
INSTALL THE APPLIANCE
ON FLAT AND FIRM SURFACE
ADJUST THE
LEVELING
1
2
Favorite
Sanitar
y
Click on the first or last page to see other F1252RD7 service manuals if exist.