LG F1252RD7 Service Manual ▷ View online
3
3
① Disassemble the top plate assembly.
② Pull out the drawer.
③ Push out the DISPENSER ASSEMBLY
after unscrew 2 screws.
When reconnecting the connector
① Unscrew the nut at the lower part of the
dispenser.
① Disassemble the 4 or 5 connectors from
the valves.
① Unscrew 1 screws from the back of the
cabinet.
② Disassemble 2 connectors.
① Blue Housing(BK-YL/BK)
② Blue Housing(BK-GY/WH)
③ White Housing(BK-WH/BK)
④ Red Housing(BK-VI/BK)
⑤ White Housing(BK-BL/RD)
② Unscrew 2 or 4 screws from the back of
the cabinet.
Connectors
5
4
Dry
Steam
3
4
CABINET COVER
Unscrew 6 screws from upper of the cabinet cover.
Unscrew the screw from filter cover.
Unscrew the screw from the lower side of the
cabinet cover.
Put a flat ( - ) screwdriver or putty knife into the
both sides of the filter cover, and pull it out.
3
5
⑤
⑤ Open the door.
⑥
⑥ Disassemble the clamp assembly.
⑦
⑦ Tilt the cabinet cover.
⑧
⑧ Disconnect the door switch connector.
※
※ NOTE: When assembling the CABINET
COVER, connect the connector.
⑨
⑨ Lift and separate the cabinet cover.
⑩
⑩ Disassemble the clamp assembly.
⑪
⑪ Disassemble the Gasket.
3
6
DOOR
DOOR LOCK SWITCH ASSEMBLY
HOW TO ASSEMBLE THE MOTOR
①
① Open the door.
②
② Remove the two screws from the Hinge.
※ When removing the Door Assembly, it is necessory
to hold the break is inner of the cabinet cover.
①
① Open the door and disassemble the CLAMP
ASSEMBLY.
②
② Unscrew the 2 screws.
※
※ Be careful! The door is heavy.
※
※ NOTE
• Reconnect the connector after replacing the
DOOR SWITCH ASSEMBLY.
Click on the first or last page to see other F1252RD7 service manuals if exist.