DOWNLOAD LG F1092QDT2 / F1092QDT25 / F1092QDTA5 Service Manual ↓ Size: 20.05 MB | Pages: 45 in PDF or view online for FREE

Model
F1092QDT2 F1092QDT25 F1092QDTA5
Pages
45
Size
20.05 MB
Type
PDF
Document
Service Manual
Brand
Device
Washing Machine
File
f1092qdt2-f1092qdt25-f1092qdta5.pdf
Date

LG F1092QDT2 / F1092QDT25 / F1092QDTA5 Service Manual ▷ View online

3
6
1
Disassemble the top plate assembly.
2
Pull out the drawer to arrow direction.
3
Unscrew 2 screws.
1
The hose clamps and the hose are
disassembled.
1
The ventilation bellows and the water inlet
bellows are disassembled on the tub.
DISPENSER ASSEMBLY
DISPENSER ASSEMBLY
PUSH
DRAWER
Option
3
7
INLET VALVE
1
Disconnect the wiring receptacle.
2
Unscrew 2 screws from the back.
• Rating : 220/240V 50/60Hz
• Resistant : 3.5~4.5kΩ
When reconnecting the connector
LOWER COVER
Open the lower cover cap by using coin and
pull out the lower cover to the arrow direction
after a screw is unscrewed.
VALVE #1 (MAIN) 
VALVE #2 (PRE) 
VALVE #3 (HOT)
White / Black - Black
Gray / White - Black
Blue / Red - Black
DOOR
1
Open the door completely.
2
Remove the two screws from the hinge.
When removing the door assembly, it is
necessary to hold the bracket that is inner
of the cabinet cover.
3
1
2
3
8
1
Take apart the cabinet gasket clamp.
2
Unscrew 2 screws from the cabinet cover.
4
Take apart the lower cover.
3
Open the lower cover cap and unscrew 1
screw inside.
1
Disassemble the control panel. (page 24)
2
Unscrew all the screws on the upper and lower
sides of the cabinet cover.
1
Take apart the tub gasket clamp.
2
Make sure that the drain hole of the gasket is
put beneath when reassembling the gasket.
efer to the arrow mark on the tub cover.
GASKET ASSEMBLY
39
1
Remove the BACK COVER.
2
Unscrew the bolt to pull out the ROTOR
assembly.
1
Disconnect the wiring connector.
2
Unscrew 6 bolts from the STATOR.
3
Remove the STATOR.
1
Pull out the hinge, pressing its snap.
2
Do not use the pulled-out hinge again. It may
be taken off during operation.
ROTOR ASSEMBLY, STATOR ASSEMBLY, FRICTION DAMPER ASSEMBLY
Rotor
Bolt
(1)
Hinge,
Damper
Damper
(ROTOR ASSEMBLY)
(STATOR ASSEMBLY)
(DAMPER)
• V ~ U (8~11Ω)
• U ~ W (8~11Ω)
• W ~ V (8~11Ω)
Note : Hook of connector (1) is on the backside
Motor Stator
U  V W
• Common ~ Ha (5~15kΩ)
• Common ~ Hb (5~15kΩ)
Hall Sensor
Ha
Hb
Common
Page of 45
Display

Click on the first or last page to see other F1092QDT2 / F1092QDT25 / F1092QDTA5 service manuals if exist.