DOWNLOAD LG BIDLFL Service Manual ↓ Size: 6.15 MB | Pages: 49 in PDF or view online for FREE

Model
BIDLFL
Pages
49
Size
6.15 MB
Type
PDF
Document
Service Manual
Brand
Device
Washing Machine
File
bidlfl.pdf
Date

LG BIDLFL Service Manual ▷ View online

41
2 Push out PANEL ASSEMBLY, CONTROL after
Push the hook(     ,     ) below.
1 The plate assembly(Top) is disassembled.
2 Pull out the drawer and unscrew 2 screws.
1 Two screws is unscrewed.
3 Unscrew the screws from the lower cover.
2 The cabinet cover clamp is removed by
special jig for service and the gasket is
released.
3 Two screws are unscrewed.
4 Unscrew all the screws on the upper and
lower sides of the CABINET COVER.
1 2
3 Lift the side the Control Panel Assembly and
pull it out
CABINET COVER
42
• Just check cut-off.
• Check the operating time.
* Door Locking time : 
1~8
sec.
Check the time between from
input the power to parts
move up, then Door locked.
1
1
1 Lift and separate the cabinet cover.
1 The cabinet cover clamp is removed and the
gasket is released.
2 Two screws are unscrewed.
3 The Door Lock S/W is disconnected form the
wiring connector and the strap.
NOTE: When assembling the CABINET
COVER, connect the Door S/W connector.
SWITCH ASSY, DOOR LOCK
43
• V ~ U (8~11
Ω)
• U ~ W (8~11
Ω)
• W ~ V (8~11
Ω)
Motor Stator
U V W
Hall Sensor
Ha
Hb
Common
• Common ~ Ha (5~15k
Ω)
• Common ~ Hb (5~15k
Ω)
1 Remove the back cover.
2 After loosening the bolt, Rotor, pull out the
rotor.
1 Remove the 6 bolt from the stator.
2 Disconnect the 2 connectors.
1 Remove the hinges (Damper) at the Tub.
3 The hinge at the base is pulled off. 
(To arrow direction)
2 The Hinge(Damper) at the base is pulled off
pressing on the snaps at the sharp end.
ROTOR ASSEMBLY, STATOR ASSEMBLY, FRICTION DAMPER
44
1 Remove pump outlet hose.
2 Remove tub pump bellows.
1 Loosen the nut.
2 Remove washing heater by pulling out.
When assembling the washing heater, insert
the heater to heater clip on the bottom of tub
and check the position of wire color.
3 Remove cap(Remaining Hose).
4 Disconnect the wiring.
5 Three screws are unscrewed from the cabinet.
6 Remove the pump to arrow direction.
PUMP
HEATER
• Rating : 240V 50Hz
• Resistant : 162~176
< Heater for Washing>
• Rating : 230V 2000W
• Resistant : 24.5~28.5
CAUTION
Page of 49
Display

Click on the first or last page to see other BIDLFL service manuals if exist.