LG 84LM9600 (CHASSIS:LC23J) Service Manual ▷ View online
2012Y IR + Soft Touch LED Lighting Scenario
구분
Spec 내용
Remark
Power
Indicator UI
- 12Y GP4 High(L9), GP4 Mid(MTK), GP4 Low(S7LR2)
Æ “ Power Light” UI Delete compared with 11Y(GP3 model)
- 11Y Carry Over Model : 12Y same Power LED scenario process
Æ “ Power Light “ UI Delete, The way of 11Y Soft Touch Ass’y is used. White LED Disable
-
GP4
(High/Mid/Low)
Power LED
scenario
User
Condition
Power On
- Stand-By condition to Red LED On : After DC ON, Red LED light Blinks twice and then Red LED is Off
- Stand-By condition to Red LED Off : After DC ON, Red LED light Blinks three times and then Red LED is Off
- Stand-By condition to Red LED Off : After DC ON, Red LED light Blinks three times and then Red LED is Off
-
Power Off
- Without Blink, Red LED On immediately
But, If the mode of Power Indicator UI is Stand-By, keep staying Red LED Off status
-
Remote Key
input
- When you put the remote Control button, Red LED Blinks once
-
Warm
Stand-by
- Red LED On stays and In the case of Set On, Red LED turns Off
Æ
Including DVR Ready model, Japanese model
Same
as the
11Y
3D mode
- Red LED Off (Power On condition is identical)
Same
as the
11Y
Factory
Condition
Factory
Default
Mode
(In-Stop)
- 12Y LED Model : Stand-By On (Red LED On)
- 12Y CCFL Model : Stand-By On (Red LED On)
- 11Y Carry Over Model (CS5XX/CM5XX) : Stand-By On (Red LED On)
- After In-Stop, Red LED On is processed and after In-Stop, Red LED turns on within 3 sec
- 12Y CCFL Model : Stand-By On (Red LED On)
- 11Y Carry Over Model (CS5XX/CM5XX) : Stand-By On (Red LED On)
- After In-Stop, Red LED On is processed and after In-Stop, Red LED turns on within 3 sec
-
Power Only
Mode
- In the case of Power Only On, Red LED turns Off
- In the case of DC Off, Red LED turns On
- In the case of DC Off, Red LED turns On
-
Power LED Scenario
Introductions of GP4 Sensor (Touch IC)
Touch Key Threshold Level (Ta = 25ºC )
1. Verify the number of THR at first.
2. Once you correctly touch Touch button for more than 1 sec,
you can see a Touch data while you keep touching the button.
you can see a Touch data while you keep touching the button.
3. Keep in mind that you can only read the Touch data during
touch status.
touch status.
4. It doesn’t matter that Touch data gets low value after taking
off your finger.
off your finger.
Manual of Touch Sensitivity
Introductions of GP4 Sensor (Touch IC)
Touch EEPROM Register change with USB port
1. Write all of the address,
value (
value (
Hex
) as a below.
capable of only Touch.txt file
based on the left picture
based on the left picture
2. Make the file
[ Filename :
‘Touch.txt’ ]
and move it to USB
(The outermost area, Don’t move
it to any folder)
it to any folder)
3. Connect USB to TV and press
button ‘ADJ menu’ and then
choose the ‘touch sensitivity
setting’
button ‘ADJ menu’ and then
choose the ‘touch sensitivity
setting’
4. Press button ‘SIMPLINK
(Simply Link key)’ and then you
can see the OK Pop up.
(Simply Link key)’ and then you
can see the OK Pop up.
5. After that, you check it the IR
LED version on In-start menu and
verify it that the number of
version is changed to what you
want.
LED version on In-start menu and
verify it that the number of
version is changed to what you
want.
Add Value
Introductions of 12Y RF ass’y + Magic Remote control
-
Introductions of 12Y RF ass’y
+ Magic Remote control
Click on the first or last page to see other 84LM9600 (CHASSIS:LC23J) service manuals if exist.