DOWNLOAD LG 26LC2R / 32LC2R (CHASSIS:LP61C) Service Manual ↓ Size: 9.37 MB | Pages: 45 in PDF or view online for FREE

4.1.2. S/W program download
(1) Connect the download jig to D-sub jack
(2) Execute ‘Channal.vi2c’ program in PC, then a main widow

will be opened.

(3) Push the button change and select the Channel memory

data

(4) Check the communication is OK or not.

=> Push the Read area (Ackn. Check) and check Cyan

area is OK message.

(5) Push the Update NVM from File

4.1.3. Colorcarrier Adjustment (inspection process)
a. Tuning the RF signal

ZJ, TJ, CJ : PAL Philips Pattern (with Color Bar)
MJ : NTSC Digital Pattern (with Color Bar)

b. push the "adj" key in the adjustment remocon.

*Caution : Each PCB assembly must be checked by check

JIG set.(Because power PCB Assembly damages
to LCD Module, especially be careful)

4.2.1 EDID(The Extended Display Identification Data ) /

DDC(Display Data Channel) download

(1) Extract a Zip file
* Caution

- Use the proper signal cable for EDID Download

* Caution: - Never connect HDMI & D-SUB Cable at the

same time.

- Use the proper cables below for EDID Writing

<EDID DATA Analog Set : 128bytes>

- 17 -

< EDID DATA HDMI Set : 256bytes>

=> Detail EDID Options are below(a, b, c, d, e)
a. Product ID

b. Serial No:  Controlled on production line
c. Month, Year: Controlled on production line:  

ex) Montly: ‘03’  => ‘03’ 

Year:  ‘2005’ => ‘0F’

d. Model Name(Hex) : 

e.Checksum: Changeable by total EDID data

4.3.1 Required Equipment

•

Remote controller for adjustment 

•

Color Analyzer (CA-110 or CA-210 or same product; ch : 9)

•

Auto W/B adjustment instrument (only for Auto adjustment) 

•

AV Pattern Generator  

4.3.2 Connecting diagram of equipment for measuring (For

Automatic Adjustment) 

[Push the 

key at the Adjust Remocon before

Adjustment of W/B, the Baud rate & PSM, CSM will change
115200bps, Standard (MJ: Optimum), Normal]

4.3.3 Adjustment of White Balance for Manual adjustment 

•

Operate the zero-calibration of the CA-110 or CA-210, then

stick sensor to LCD module when you adjust. 

•

For manual adjustment, it is also possible by the following

sequence

1) Select RF no signal by pressing "POWER ON" key on

remote control for adjustment then operate heat run more
than 15 minutes. 

2) As below Fig. 7, Supply 216Level (85 IRE) Gray pattern to

Video input.

26/32LC2R-ZJ : AV3 or AV4(Input 50Hz)
26/32LC2R-TJ : AV1or AV2(Input 50Hz),
26/32/37LC2R-CJ : AV1 or AV2 (Input 50Hz)
26,32LC2R-MJ : VIDEO1 or VIDEO2 (Input 60Hz)

3) Press the POWER ON KEY on R/C for converting input

mode.

4) Enter the White Balance adjustment mode by pressing the

IN-START key (White Balance) on R/C.

5) Stick sensor to center of the screen and select each items

(Red/Green/Blue Gain and Offset) using 

/

(CH +/-) key

on R/C..

6) Adjust Only High Light with R Gain / B Gain using 

/

(VOL + / -) key on R/C.

7) Adjust it until color coordination becomes as below. 

(Initially, R/G/B gain and R/G/B offset values are fixed as

below)

Red Gain :   80 ,    Green Gain :    80 ,     Blue Gain :  80
Red Offset :  80,    Green Offset :   80 ,     Blue Offset :  80

* Target Value [PSM: Standard(ZJ, TJ, CJ), Optimum(MJ),

CSM: Normal]

-Normal (9300K)  x ; 0.283±0.003  y ; 0.298±0.003
=> Reference Value(Automatically fixed)

-Cool(11000K): x:0.274±0.003, y: 0.286±0.003

-Warm(7200K) : x:0.303±0.003, y: 0.319±0.003

8) When adjustment is completed, Exit adjustment mode

using EXIT key on R/C.

- 18 -

Model Name

Product ID

Dec

Hex

EDID table

26C2R

22045(A)

561D

1D56

22046(B)

561E

1E56

32LC2R

30057(A)

7569

6975

30058(D)

756A

6A75

37LC2R

30059(A)

756B

6B75

30060(D)

756C

6C75

Model Name

Model Name(HEX)

26LC2R-TJ

32     36     4C     43     32    52     2D     54     4A

32LC2R-TJ

33     32     4C     43     32    52     2D     54     4A

216 Level(85IRE)

* Pattern for Adjustment of White Balance

- 19 -

No

Item

Condition

Remark

1

Power

Off

2

Volume Level

30

3

Main Picture Input

TV

4

Main Last Channel

Pr 01

5

Mute

Off

6

ARC

16 : 9

7

Station

Auto Programme

Manual Programme

Programme Edit

Favorite Programme

None

8

Picture

PSM

Dynamic

Dynamic

Contrast

100

Brightness

50

Colour

50

Sharpness

50

CSM

Normal

XD

Auto

Advanced

Reset

9

Sound

SSM

Flat

Off

AVL

Off

Balance

0

50

50

Speaker

On

10

Time

Clock

--:--

User control

Off time

Off

On time

Off

Auto sleep

Off

11

Special

Language

English

Area management

Child Lock

Off

Set ID

1

XD Demo

To start

12

Screen

Auto config.

Manual config.

XGA/VGA mode

Variable by each mode

ARC

PFP Transparency

Reset

- 20 -

1

POWER

2

POWER ON

3

MUTE

4

P-CHECK

5

S-CHECK

6

ARC

7

CAPTION

8

TXT

9

TV/AV

10

TURBO SOUND

11

TURBO PICTURE

12

IN-START

13

ADJ

14

MPX

15

EXIT

16

APC(PSM)

17

ASC(SSM)

18

MULTIMIDIA

19

FRONT-AV

20

CH

21

VOL

22

ENTER

23

PIP CH-(OP1)

24

PIP CH+(OP2)

25

PIP SWAP(OP3)

26

PIP INPUT(OP4)

27

EYE

28

MENU

29

IN-STOP

30

STILL

31

TIME

32

SIZE

33

MULTI PIP

34

POSITION

35

MODE

36

PIP

37

TILT

38

0~9

To turn the TV on or off
To turn the TV on automatically if the power is supplied to the TV. (Use the
POWER key to deactivate): It should be deactivated when delivered.
To activate the mute function.
To check TV screen image easily.
To check TV screen sound easily
To select size of the main screen (Normal, Spectacle, Wide or Zoom)
Switch to closed caption broadcasting
To toggle on/off the teletext mode
To select an external input for the TV screen
To start turbo sound
To start turbo picture
To enter adjustment mode when manufacturing the TV sets.
To adjust the screen voltage (automatic): 
In-start

mute

Adjust

AV(Enter into W/B adjustment mode)

W/B adjustment (automatic):
After adjusting the screen 

W/B adjustment 

Exit two times (Adjustment completed)

To enter into the adjustment mode. To adjust horizontal line and sub-brightness.
To select the multiple sound mode (Mono, Stereo or Foreign language)
To release the adjustment mode
To easily adjust the screen according to surrounding brightness
To easily adjust sound according to the program type
To check component input
To check the front AV
To move channel up/down or to select a function displayed on the screen.
To adjust the volume or accurately control a specific function.
To set a specific function or complete setting.
To move the channel down in the PIP screen.
To use as a red key in the teletext mode
To move the channel in the PIP screen
To use as a green key in the teletext mode
To switch between the main and sub screens
To use as a yellow key in the teletext mode
To select the input status in the PIP screen
To use as a blue key in the teletext mode
To set a function that will automatically adjust screen status to match
the surrounding brightness so natural color can be displayed.
To select the functions such as video, voice, function or channel.
To set the delivery condition status after manufacturing the TV set.
To halt the main screen in the normal mode, or the sub screen at the PIP screen.
Used as a hold key in the teletext mode (Page updating is stopped.)
Displays the teletext time in the normal mode
Enables to select the sub code in the teletext mode
Used as the size key in the PIP screen in the normal mode
Used as the size key in the teletext mode
Used as the index key in the teletext mode (Top index will be
displayed if it is the top text.)
To select the position of the PIP screen in the normal mode
Used as the update key in the teletext mode (Text will be
displayed if the current page is updated.)
Used as Mode in the teletext mode
To select the simultaneous screen
To adjust screen tilt
To manually select the channel.

Shortcut keys

Shortcut keys

Shortcut keys

Use the AV
key to enter
the screen
W/B
adjustment
mode.

Shortcut keys

Shortcut keys

Shortcut keys