LG 26LC2R / 32LC2R (CHASSIS:LP61C) Service Manual ▷ View online
- 13 -
4.1.2. S/W program download
•
Preliminary steps
4.1.2.1 Download method 1 (PCB Ass’y)
(1) Connect the download jig to D-sub jack
(2) Execute ‘Download.vi2c’ program in PC, then a main
window will be opened
(3) Double click the blue box and confirm "Bootloader
Version" as 40.
(4) Click the "Erase Flash" button
(5) Double click the download file low, then "edit"
window will be opened
(6) Click the choice button in the "edit window", then
"file choice window" will be opened
(7)Choose the Hex file in folder and execute
downloading with click " open" button.
=>
Select the "Bootloader.bat" file(install >
VCTP_download > Bootloader)
VCTP_download > Bootloader)
=> Push "OK"
=>
Finish the program, after saving the file
"download_cs.vi2c"
"download_cs.vi2c"
(if you click , the massage appears automatically)
x
- 14 -
(8) Click OK button at the "edit window"
(9) Under Downloading process
(10) If download is failed, for example "No acknowledge
from slave". Execute download again from(1)
4.1.2.2 Download method 2 (AV Plate Ass’y)
(1) Push S/W ‘ON" (connect SCL to GND using switch
at Jig ) and connect the download jig to D-sub jack
(2) Supply the power (Stand-by 5V) and wait for 3
seconds.
(3) Push the S/W off (Disconnect SCL to GND using
switch at jig)
(4) Execute ‘Download.vi2c’ program in PC, then a main
widow will be opened.
(5) Double click the blue box and confirm "Bootloader
Version" as 40.
Push S/W
Double click
Push S/W
(6)Click the "Erase Flash" button
(7) Double click the download file low then, "edit"
window will be opened
(8) Chick the choice button I n the "edit window", then
"file choice window’ will be opened
(9) Choose the Hex file in folder and execute
downloading with click "open button"
(10) Click OK button at the "edit window"
(11) Under Downloading progress
(12) If download is failed, for example "No acknowledge
from slave", execute download again from (1)
4.1.2.2 Download method 3 (SET)
(1) Push the "Tilt" button in an Adjust Remocon Then
the LCD TV will change a "slave mode"
(2) Connect Zig to TV using a D-sub cable
- 15 -
(3) Execute ‘Download_CS.vi2c’ program in PC, then a
main widow will be opened.
(4) Click "GO" button
(5) Double click the blue box and confirm "Bootloader
Version" as 40.
(6)Click the "Erase Flash" button
(7) Double click the download file low then, "edit"
window will be opened
(8) Chick the choice button I n the "edit window", then
"file choice window’ will be opened
(9) Choose the Hex file in folder and execute
downloading with click "open button"
(10) Click OK button at the "edit window"
(11) Under Downloading progress
(12) If download is failed, for example "No acknowledge
from slave", execute download again from (1)
- 16 -
Double click
If you don’t push the "go",
the Hex file would not be
downloaded although the
download proceeds normally
at first glance
the Hex file would not be
downloaded although the
download proceeds normally
at first glance
Click on the first or last page to see other 26LC2R / 32LC2R (CHASSIS:LP61C) service manuals if exist.