DOWNLOAD LG GR-429GVCA QVJA Service Manual ↓ Size: 3.89 MB | Pages: 60 in PDF or view online for FREE

- 21 -

ASSEMBLY JAWS

BOLT

TOOL

TUBE

LOKRING

LOKRING

JOINT

(1) When the appliance is plugged in, it is set to 2°C for the Refrigerator and -18°C for the Freezer. You can adjust the

Refrigerator and the Freezer control temperature by pressing the FRZ. Temp button or REF. Temp button.

(2) When the power is initially applied or restored after a power failure, it is automatically set to “-18°C/2°C” (in the case of

GOOD MDL, it is automatically set to “3/3”)

1) If door open, graphic is rotated in A1 

➝

A2 

➝

A3 

➝

A4 

➝

A5 continuously, and this

status is maintained during door open.

2) Door close and after 1 minute, the rotation of graphic stops.

1) When power is initially applied or restored after a power failure, the back light is on for 1minute.

2) In the status of back light’ off, if any button is pushed or door open, the only back light is on for 20 seconds and the

function of button is not worked.

- 22 -

Display Panel

Temperature Adjustment Button

for Freezer Compartment

Temperature Adjustment Button

for Refrigerator Compartment

Temperature Adjustment Button

for Miracle Zone Compartment

Lock Button

Vacation Button

Super Freezer

A1

A2

A3

A4

A5

Control range of Freezer 
: -15°C ~ -23°C

Control range of Refrigerator
: 6°C ~ -1°C

(1) You can select optimum temperature range depending on types of food stored.

(2) 4 step of temperature selection including 2°C, -1°C, -3°C and -7°C is available.

(1) It is the function which increases the cooling speed of freezer by continuously operating compressor and freezer fan. 

When it’s button is pressed, GRAPHIC is on.

(2) Whenever selection switch is pressed, selection/release (GRAPHIC on/off) changes in turn.

(3) If power is on after power cut, SUPER FREEZING function is canceled.

(4) It shall be cancelled after compressor and freezer fan continuously operate for three hours.

(5) If defrost starts during SUPER FREZZING, SUPER FREZZING operates for the rest of time after defrost is complete

when SUPER FREZZING operation time is less than 90 minutes. If SUPER FREZZING operated for more than
90minutes, the SUPER FREZZING shall operate for two hours before it stops.

(6) If SUPER FREZZING is pressed during defrost, SUPER FREZZING GRAPHIC is on but SUPER FREEZING operation

starts seven minutes after defrost is complete and it shall operate for three hours.

(7) If SUPER FREZZING is selected within seven minutes after compressor has stopped, the compressor (compressor

delays seven minutes) shall start after the balance of the delay time.

(8) If VACATION button is pressed during the SUPER FREEZING, the SUPER FREEZING function is immediately released.

(1) When pressing the VACATION button, the VACATION GRAPHIC is on and its function is operated.

(2) In the status of VACATION mode, regardless of current notch, freezer is controlled at –13°C and refrigerator is controlled at 7°C. 

(but, above temperature is displayed in the case of BEST model.)

(3) In the status of VACATION mode, any other button except VACATION button is not worked.

(4) When pressing the VACATION button again, VACATION GRAPHIC is off and its function is released. 

(Here, freezer and refrigerator is controlled at previous setting temperature.)

(1) Buzzer shall give warnings if freezer, refrigerator, or home bar door is open for more than one minute.

(2) Buzzer shall give warnings three times in 0.5 second interval, then three times on/off in 0.5 second interval in every thirty

seconds.

(3) Warnings are ceased when freezer, refrigerator and home bar doors are all closed.

(1) When the button on the front Display is pushed, a Ding ~ sound is produced. 

(Refer to the BUZZER OPERATION CHECK)

- 23 -

CLOSE

CLOSE

OPEN

CLOSE

CLOSE

OPEN

CLOSE

BUZZER

within

1 minute

1 Min

30 Sec

500 ms

FREEZER

REFRIGERATOR

DOOR

(1) To protect the risk of lamp heat, when Refrigerator door opens for 7 min., refrigerator lamp is auto off.

(1) Defrosting starts each time the COMPRESSOR running time reaches 7 hours.

(2) For initial power on or for restoring power, defrosting starts when the compressor running time reaches 4hours.

(3) Defrosting stops if the sensor temperature reaches 8°C or more. If the sensor doesn’t reach 8°C in 2hours, the defrost

mode is malfunctioning. (Refer to the defect diagnosis function.)

(4) Defrosting won’t function if its sensor is defective(wires are cut or short circuited)

Electrical parts such as COMP. defrosting heater. freezer FAN. etc. are turned on in the following order to prevent noise and
parts damage. Several parts are started at the dame time at initial power on and are turned off together when TEST is
completed.

NOTE) (1) In the case of BEST/ BETTER model, dispenser heater is optional. 

(2) Damper heater is only applied in the BEST model. 
(3) Damper heater and Dispenser heater are not in the GOOD model.

- 24 -

Temperature of Defrosting
Sensor is 45°C or more 
(when unit is newly 
purchased or when moved)

Temperature of defrosting
sensor is lower than 45°C 
(when power cuts, SERVICE)

Reset to normal operation from
TEST MODE

in 1/2 second

in 1/2 second

in 7 minute

in 1/2 second

in 1/2 second

in 5 second

in 1/2 second

in 3 second

in 1/2 second

in 3 second

in 1/2 second

in 1/2 second