DOWNLOAD LG GR-267 Service Manual ↓ Size: 22.52 MB | Pages: 127 in PDF or view online for FREE

- 101 -

* The temperature will fluctuate by 

±

3

°

C depending on the load conditions in the refrigerator.

1. When power is first on or power is on after power cut, "Mid" (three steps) shall be automatically selected.

2. When temperature selection button in the freezer or refrigerator is continuously pressed, the lamp is on in the following

sequence:
"Mid" 

➝

"Mid / Max 1" 

➝

"Mid / Max 2" 

➝

"Max" 

➝

"Min" 

➝

"Min / Mid" 

➝

"Mid"

- 30 -

F

R

Display Lamp 
Change

Temperature 
control

Mid

Mid / Max 1

Mid / Max 2

Max

Min

Min / Mid

Freezer 
Temperature

-19

°

C

-20.5

°

C

-22

°

C

-24

°

C

-15

°

C

-17

°

C

Refrigerator 
Temperature

3

°

C

1.5

°

C

0

°

C

0

°

C

6

°

C

4.5

°

C

1. Power freeze is the function which increases the cooling speed of freezer by continuously operating compressor and

freezer fan. When power freeze button is pressed, the letter “POWER FREEZE” is light on and 

u

LED is on after

flickering five times.

2. Whenever selection switch is pressed in power freezer, selection/release (lamp on/off) changes in turn.

3. If power is on after power cut, power freeze is canceled.

4. Even though power freezer is selected, the set temperatures of freezer and refrigerator do not change.

5. If power freezer is selected, the set temperature of freezer and refrigerator can be changed.

6. If power freezer is selected, the refrigerator operates at its set temperature.

7. Power freezes shall be cancelled after compressor and freezer fan continuously operate for three hours.

8. If defrost starts during power freezer, the power freeze operates for the rest of time after defrost is complete when power

freeze operation time is less than 90 minutes. If power freeze operated for more than 90minutes, the power freeze shall
operate for two hours before it stops.

9. If power freeze is pressed during defrost, power freeze LED is on but power freeze operation starts seven minutes after

defrost is complete and it shall operate for three hours.

10. If power freeze is selected within seven minutes after compressor has stopped, the compressor (compressor delays

seven minutes) shall start after the balance of the delay time.

11. The fan motor in the freezer compartment rotates at very high speed during power freezer.

1. Freezer fan motor has high and standard RPMs. 

2. High RPM is used when electricity is first on, for power freeze, and when refrigerator is overloaded. But standard RPM is

used for general purposes.

3. Fan motor stops operation when freezer, refrigerator, and home bar doors are open and vice versa.

1. Buzzer shall give warnings if freezer, refrigerator, or home bar door is open for more than one minute.

2. Buzzer shall give warnings three times in 0.5 second interval, then three times on/off in 0.5 second interval in every thirty

seconds.

3. Warnings are ceased when freezer, refrigerator and home bar doors are all closed.

1. Buzzer will sound when front display button is pressed.

- 31 -

Closed

Open

Closed

Open

3Times

3Times

3Times

3Times

Closed

Within one minute

one minute

30

 Seconds

30

 Seconds

30

 Seconds

Freezer Door

or Refrigerator

Door

Buzzer

1. If test button in main PWB is pressed, it will sound “beep”.

2. If forced starting is selected, warning cycle will be repeated three times.  Each cycle has on for 0.2 second and off for 1.8

seconds.

3. If forced defrost is selected, warning cycle will be repeated three times. Each cycle has on for 0.2 second, off for 0.2

second, on for 0.2 second and off for 1.4 seconds.

1. Defrost starts when compressor operation time reaches between seven hours and seven hours and twenty minutes.

2. Defrost starts when compressor operation time reaches between four hours and four hours and twenty minutes when

power is first on or after a power cut.

3. Defrost shall stop when the defrost sensor temperature is more than 10

°

C. If the temperature of defrost sensor does not

reach to 10

°

C after two hours, faulty defrost will be displayed. 

4. If defrost sensor is faults (wire cut or short-circuit), defrost is not working.

Compressor, defrost heater, cooling fan (high speed), cooling fan (standard), electromagnetic single motor damper, etc. start
in the following sequence in order to protect noise and parts damage when power is first applied and when test is complete.

- 32 -

When

electricity

is
first

applied

TEST

MODE

When the
temperature of
defrost sensor is
above 10

°

C 

(when purchased

or moved to
another house)

If there is error in
function, initial
starting does not
work.

■

Load starting
sequence when
freezer and
refrigerator doors
are closed.

If switch is one more
pressed or the
temperature of
defrost sensor is
above +5

°

C in test

mode 2, it returns to
test mode and start
initial driving.
(compressor will start
after seven minutes)

When the
temperature of
defrost sensor is
below 10

°

C 

(during power cut

and service)

Test Mode 1
(Forced Starting)

Test Mode 2
(Forced Defrost)

0.5

sec

0.3

sec

0.3

sec

0.3

sec

0.5

sec

10

sec

0.3

sec

5

sec

5

sec

0.3

sec

20

sec

0.3

sec

0.3

sec

0.3

sec

0.3

sec

0.3

sec

0.3

sec

0.3

sec

0.3

sec