DOWNLOAD LG MC-807SLR Service Manual ↓ Size: 1.52 MB | Pages: 39 in PDF or view online for FREE

Model
MC-807SLR
Pages
39
Size
1.52 MB
Type
PDF
Document
Service Manual
Brand
Device
Microwave Oven
File
mc-807slr.zip
Date

LG MC-807SLR Service Manual ▷ View online

Trouble Shooting Guide
5-14
CAUTIONS
1. Check grounding before checking for other trouble.
2. Be careful of the high voltage circuit.
3. When checking the continuity of the switches or transformer, disconnect one lead wire from these parts and
then check continuity without turning the power source on.
4. Do not touch any part of the circuitry on the control circuit board, since static electric discharge may damage
this control circuit.
Always touch yourself to ground while working on this circuit to discharge any static charge built up in your
body.
5. First operate the microwave oven following the correct operating.
6. If the oven become inoperative because of a fuse, check the primary, the secondary and the monitor switches
before replacing the fuse.
CONDITION
The fuse blows when power
cord is plugged into wall
receptacle.
Shorted lead wise assy or
wire hardness.
Defective monitor switch or
out of adjustment.
Test procedure switches.
": 0" does not appear in 
displasy window when
power cord is first plugged
into wall outlet.
Microwave oven plug is not
inserted tightly.
No power at outlet.
Check home fuse.
Replace or repair wiring.
Test procedure tact switch
key.
Defective tact switch key of
P.C.B.
Display does not operate
properly when CLOCK is
touched.
Open wire in power cord,
wiring harness, or wiring
between control panel
assembly units.
Insert microwave oven plug
securely.
Replace lead wire or check
and repair wire hardness.
CAUSE
TEST PROCEDURE OR
CORRECTION
Blown fuse.
Test procedure fuse.
(TROUBLE 1) Oven does not operate all.
OFF CONDITION
5-15
CONDITION
No input can be 
programmed.
Some inputs can not be 
programmed.
Display fixes some figure and
can not accept any input.
Set time does not count
down when touched START.
Display shows a number or
figure different from one
touched.
Random programming when
pressing other than touch
keys.
Defective tact switch key of
P.C.B.
Loose connection.
Connect them tightly.
Defective secondary switch
or out of adjustment
Defective tact switch key of
P.C.B.
Test procedure tact switch
key of P.C.B.
Test procedure secondary
switch.
Test procedure tact switch
key of P.C.B.
CAUSE
TEST PROCEDURE OR
CORRECTION
Incorrect touch key.
Touch key again after 
closing.
Loose connection.
Test tact switch key of
P.C.B.
(TROUBLE 2) Oven does not at all even thought MOTOR and P.C.B program.
5-16
CONDITION
Oven does not go into a
cook cycle when START key
is touched.
Primary and secondary
interlock switches defective
or out of adjustment.
Defective flat cable of
P.C.B.
Test procedure flat cable of
P.C.B.
Test procedure primary and
secondary switches.
CAUSE
TEST PROCEDURE OR
CORRECTION
Defective tact switch key of
P.C.B.
Test procedure tact switch
key of P.C.B.
Open or loose wiring to
above components.
Check and repair wiring.
Ouput power is too low.
Defective fan motor.
Low AC input voltage.
Use the microwave oven at
adequate line voltage.
Test procedure fan motor.
Food temperature is too low.
This may not be a defect.
It is possible that the food
should be cooked for a
longer period.
Uneven cooking.
Inconsistent intensity of
microwave by their 
characteristics.
Food does not turn during
cook cycle.
Food or cookware extending
oven edges of turntable prevents
turning rearrange food.
1. Wrap the thinner part with 
aluminum foil.
2. Use plastic wrap or with a lid.
3. Stir once or twice while cooking
soup, cocoa or milk etc.
Turntable motor does not
operate.
Refer to preceding turntable
motor problem.
Output is too high when you
set lower power level.
Defective relay 2 of P.C.B.
High AC input voltage.
Use the microwave oven at
adequate line voltage.
Test procedure relay 2 of
P.C.B.
(TROUBLE 3) Oven does not operating microwave cooking
5-17
CONDITION
No microwave oscillation.
Defective relay 2 of P.C.B.
Defective high voltage 
transformer.
Test procedure high voltage
transformer.
Test procedure relay 2 of
P.C.B.
CAUSE
TEST PROCEDURE OR
CORRECTION
Defective high voltage
capacitor.
Defective high voltage
diode.
Test procedure high voltage
diode.
Test procedure high voltage
capacitor.
Defective magnetron.
Low AC input voltage.
Use the microwave oven at
adequate line voltage.
Test procedure magnetron.
Open or loose wiring to
above components.
Blown fuse
Check and repair wiring.
Check fuse
Spark occurring.
Using metallic ware and
allowing it to touch the 
oven wall.
Ceramic ware trimmed in
gold or silver powder is used.
Do not use any type of cook
ware with metallic trimming.
Do not use metallic ware for
cooking except where noted
in the cookbook.
Grill rack is using in no load
condition.
Do not use the oven at
microwave and combination
mode with the grill rack
placed in the cavity when
the oven is empty.
(TROUBLE 3) Oven does not operating microwave cooking
Page of 39
Display

Click on the first or last page to see other MC-807SLR service manuals if exist.