JBL A6000GTI EMC - CB Certificate ▷ View online
Technical authority:
Manufacturer: Crown International
Testreport No.:
MIKES BABT Product Service GmbH
Type:
A6000GTI
A23511-00-00FG
KBA-No.: KBA-P 00034-2000
Page:
9
of
10
MIKES BABT PRODUCT SERVICE GmbH Ohmstrasse 2-4 94342 Strasskirchen Tel.:+9424-9407-0 Fax:+9424-9407-60 Rev.No 8.9
2.3 Immunity test against electromagnetic radiation:
2.3.1 Test method:
2.3.1.1 Test setup:
Used test equipment:
see Attachment B (ARI)
Frequency range:
20 - 1000 MHz
Fieldstrength:
60 V/m
Modulation:
AM 80 %, 1 kHz
Frequency steps:
1%
Stay time per frequency step:
2 sec
Cables which are longer than 2m have been bundled to a length of 2 m.
The EUB was connected to the ground plane.
The display was controlled with a video camera.
2.3.1.2 Test result:
The 1kHz signal was slightly audible in almost all frequency region. The paragraph 6.7 of Annex
I with Annex IX will be judged as positive, because the event is not so loud to affect the driver.
I with Annex IX will be judged as positive, because the event is not so loud to affect the driver.
Technical authority:
Manufacturer: Crown International
Testreport No.:
MIKES BABT Product Service GmbH
Type:
A6000GTI
A23511-00-00FG
KBA-No.: KBA-P 00034-2000
Page:
10
of
10
MIKES BABT PRODUCT SERVICE GmbH Ohmstrasse 2-4 94342 Strasskirchen Tel.:+9424-9407-0 Fax:+9424-9407-60 Rev.No 8.9
2.4 Date of the test:
26.-27.06.2003
2.5 Location of the test facility:
Strasskirchen
2.6 Remarks:
none
3 Attachment:
3.1 Description of the representative ESA according to Annex 2B, Appendix I:
see system description
3.2 List of all additional relevant testreports according to Annex 2B, Appendix II:
none
3.3 Additional attachment:
none
4 Summary:
The above named documentation file (see item 0.5) and the described type are in compliance
with the test requirements.
with the test requirements.
The testlaboratory is recognised / accredited by the recognition- / accreditation department of
the Kraftfahrt-Bundesamt, Federal republic of Germany, with the KBA-recognition / accreditation
number KBA-P 00034-2000.
the Kraftfahrt-Bundesamt, Federal republic of Germany, with the KBA-recognition / accreditation
number KBA-P 00034-2000.
It is not allowed to copy this report even partly without the allowance of the testlaboratory.
The testreport covers page 1 to 10
Strasskirchen,
30.06.2003
(place)
(date)
checked by:
tested by :
i. A.
Günter Mikes
Dipl.Ing.(FH)
Dr.Gerald Fischer
Dipl.Phys.
Technical authority:
Manufacturer: Crown International
Testreport No.:
MIKES BABT Product Service GmbH
Type:
A6000GTI
A23511-00-00FG
KBA-No.: KBA-P 00034-2000
Page:
10
of
10
MIKES BABT PRODUCT SERVICE GmbH Ohmstrasse 2-4 94342 Strasskirchen Tel.:+9424-9407-0 Fax:+9424-9407-60 Rev.No 8.9
2.4 Date of the test:
26.-27.06.2003
2.5 Location of the test facility:
Strasskirchen
2.6 Remarks:
none
3 Attachment:
3.1 Description of the representative ESA according to Annex 2B, Appendix I:
see system description
3.2 List of all additional relevant testreports according to Annex 2B, Appendix II:
none
3.3 Additional attachment:
none
4 Summary:
The above named documentation file (see item 0.5) and the described type are in compliance
with the test requirements.
with the test requirements.
The testlaboratory is recognised / accredited by the recognition- / accreditation department of
the Kraftfahrt-Bundesamt, Federal republic of Germany, with the KBA-recognition / accreditation
number KBA-P 00034-2000.
the Kraftfahrt-Bundesamt, Federal republic of Germany, with the KBA-recognition / accreditation
number KBA-P 00034-2000.
It is not allowed to copy this report even partly without the allowance of the testlaboratory.
The testreport covers page 1 to 10
Strasskirchen,
30.06.2003
(place)
(date)
checked by:
tested by :
i. A.
Günter Mikes
Dipl.Ing.(FH)
Dr.Gerald Fischer
Dipl.Phys.
Technical authority:
Manufacturer: Crown International
Testreport No.:
MIKES BABT Product Service GmbH
Type:
A6000GTI
A23511-00-00FG
KBA-No.: KBA-P 00034-2000
Page:
10
of
10
MIKES BABT PRODUCT SERVICE GmbH Ohmstrasse 2-4 94342 Strasskirchen Tel.:+9424-9407-0 Fax:+9424-9407-60 Rev.No 8.9
2.4 Date of the test:
26.-27.06.2003
2.5 Location of the test facility:
Strasskirchen
2.6 Remarks:
none
3 Attachment:
3.1 Description of the representative ESA according to Annex 2B, Appendix I:
see system description
3.2 List of all additional relevant testreports according to Annex 2B, Appendix II:
none
3.3 Additional attachment:
none
4 Summary:
The above named documentation file (see item 0.5) and the described type are in compliance
with the test requirements.
with the test requirements.
The testlaboratory is recognised / accredited by the recognition- / accreditation department of
the Kraftfahrt-Bundesamt, Federal republic of Germany, with the KBA-recognition / accreditation
number KBA-P 00034-2000.
the Kraftfahrt-Bundesamt, Federal republic of Germany, with the KBA-recognition / accreditation
number KBA-P 00034-2000.
It is not allowed to copy this report even partly without the allowance of the testlaboratory.
The testreport covers page 1 to 10
Strasskirchen,
30.06.2003
(place)
(date)
checked by:
tested by :
i. A.
Günter Mikes
Dipl.Ing.(FH)
Dr.Gerald Fischer
Dipl.Phys.
