JBL 08 GTi User Manual / Operation Manual ▷ View online
A
B
D
C
13
Figure B
SURFACE ANGLE INSTALLATION
08GTi Owners Manual 9/17/98 4:17 PM Page 13
Flush Mounting
Instructions
Instructions
a) Use a hole saw or other tool and
the Flush Mount Template at the
back of this manual to make a hole
for the flush mount cup in the
desired location. Secure the metal
spring to the flush mount cup using
one metal spring screw as shown
in figure C. Tighten the screw only
enough to keep the metal spring
from falling off.
the Flush Mount Template at the
back of this manual to make a hole
for the flush mount cup in the
desired location. Secure the metal
spring to the flush mount cup using
one metal spring screw as shown
in figure C. Tighten the screw only
enough to keep the metal spring
from falling off.
b) Push the flush mount cup with
the metal spring into the hole that
was cut in step a.
the metal spring into the hole that
was cut in step a.
c) Tighten the larger
3
⁄
4
" spring
mounting screw to lock the flush
mounting cup into the mounting
hole.
mounting cup into the mounting
hole.
14
C
A
B
Flush Mount Cup
FLUSH MOUNT INSTALLATION
Figure C
08GTi Owners Manual 9/17/98 4:17 PM Page 14
d) Secure the mounting plate to the
flush mount cup using three
flush mount cup using three
5
⁄
16
"
screws. Connect the speaker wire
to the tweeter. (See Figure D)
to the tweeter. (See Figure D)
e) Push the tweeter down onto the
mounting plate making sure to line
up the bayonet tabs with the slots
in the tweeter housing.
mounting plate making sure to line
up the bayonet tabs with the slots
in the tweeter housing.
f) Twist the tweeter clockwise
about
about
1
⁄
4
" to lock it into
position.
15
D
F
E
Figure D
FLUSH
MOUNT
INSTALLATION
MOUNT
INSTALLATION
08GTi Owners Manual 9/17/98 4:17 PM Page 15
Flush Angle
Mounting Instructions
Mounting Instructions
a) Follow steps a through c in
the Flush Mounting Instructions.
the Flush Mounting Instructions.
b) Secure the flush angle mount
adapter to the flush mount cup
using two
adapter to the flush mount cup
using two
5
⁄
16
" screws as shown
in Figure E.
c) Connect the 08GTi speaker
wires (with crossover) to the
tweeter.
wires (with crossover) to the
tweeter.
d) Press the tweeter down onto
the flush angle mount adapter
lower portion making sure to line
up the snaps with the slots in the
tweeter housing.
the flush angle mount adapter
lower portion making sure to line
up the snaps with the slots in the
tweeter housing.
e) Snap the other portion of the
tweeter down onto the angle
adapter.
tweeter down onto the angle
adapter.
16
08GTi Owners Manual 9/17/98 4:17 PM Page 16
Click on the first or last page to see other 08 GTi service manuals if exist.