JBL SUB 140 (serv.man2) EMC - CB Certificate ▷ View online
Page 46 of 54
Report No.: 1009940
IEC60065 - ATTACHMENT
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60065J
Z1
Add the following new clause after Clause 20:
Z1 Resistance to candle flame ignition
A television set shall be so designed that the likelihood of
ignition and the spread of fire caused by a candle flame is
reduced.
ignition and the spread of fire caused by a candle flame is
reduced.
NOTE 1 An apparatus with a viewing screen is not
regarded to be a television set if it is declared not to be so
by the manufacturer.
regarded to be a television set if it is declared not to be so
by the manufacturer.
This requirement does not apply to the display screen of
rear projection TV’s.
rear projection TV’s.
NOTE 2 This exemption has been allowed because this
technology is falling out of use and it is expected that
within a few years it will no longer exist. This exemption
will not be extended to other technologies.
technology is falling out of use and it is expected that
within a few years it will no longer exist. This exemption
will not be extended to other technologies.
NOTE 3 The frame around the screen is not exempted
from the requirements.
from the requirements.
Wood and WOOD-BASED MATERIAL with a thickness of
at least 6 mm is considered to fulfil the V-1 requirement
when applying CLC/TS 62441.
at least 6 mm is considered to fulfil the V-1 requirement
when applying CLC/TS 62441.
Compliance is checked according to CLC/TS 62441.
NOTE 4 The term vertical, as used in the first dash of
clause 5.2 of CLC/TS 62441, does not mean a perfectly
vertical position. It should be interpreted as any surface
that can be touched by the flame of a candle of 150 mm
height and 20mm diameter while the candle is still
touching the supporting surface. A typical candle used in
the home is assumed to be 20 mm diameter.
clause 5.2 of CLC/TS 62441, does not mean a perfectly
vertical position. It should be interpreted as any surface
that can be touched by the flame of a candle of 150 mm
height and 20mm diameter while the candle is still
touching the supporting surface. A typical candle used in
the home is assumed to be 20 mm diameter.
NOTE 5 It is expected that CLC/TS 62441 will in the
future be replaced by a standard, at which time that
standard will become applicable, subject to a vote by
National Committees at the time.
future be replaced by a standard, at which time that
standard will become applicable, subject to a vote by
National Committees at the time.
N/A
Page 47 of 54
Report No.: 1009940
IEC60065 - ATTACHMENT
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60065J
Annex ZA
Replace the entire Annex ZA by the following.
Annex ZA
(normative)
Normative references to international publications
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any
amendments) applies.
document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any
amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by
(mod), the relevant EN/HD applies.
(mod), the relevant EN/HD applies.
P
Page 48 of 54
Report No.: 1009940
IEC60065 - ATTACHMENT
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60065J
Annex ZA
Cont.
P
Page 49 of 54
Report No.: 1009940
IEC60065 - ATTACHMENT
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60065J
Annex ZA
Cont.
P
Click on the first or last page to see other SUB 140 (serv.man2) service manuals if exist.