JBL SPARK (serv.man8) EMC - CB Certificate ▷ View online
Report No.:
EM201200813-7
Application No.:
ZJ00024740
Page 25 of 47
Project No.:
ZJ00024740
Standard:
DP EN55013 QP
Power Source:
AC 230V/50Hz
Test item:
Power Clamp Test
Date:
2012-12-27
Temp./Hum.(%RH): 20.1/54%RH
Time:
20:41:10
EUT:
Wireless high-power speaker for
lighting connector
lighting connector
Model:
JBL ONBEAT RUMBLE
Test Result:
Pass
Note:
Test port: DC output port for EUT;
No.
Frequency
Reading
Correct
Result
Limit
Margin
Remark
(MHz)
(dBpW)
Factor(dB)
(dBpW)
(dBpW)
(dB)
1 32.3600 13.09 18.01 31.10 45.09 -13.99
QP
2 32.3600 11.79 18.01 29.80 35.09 -5.29
AVG
3 33.2800 13.47 17.63 31.10 45.12 -14.02
QP
4 33.2800 11.97 17.63 29.60 35.12 -5.52
AVG
5 38.8400 9.25 16.35 25.60 45.33 -19.73
QP
6 38.8400 7.25 16.35 23.60 35.33 -11.73 AVG
7 64.1200 9.45 15.05 24.50 46.26 -21.76
7 64.1200 9.45 15.05 24.50 46.26 -21.76
QP
8 64.1200 5.25 15.05 20.30 36.26 -15.96 AVG
9 73.7200 11.27 15.33 26.60 46.62 -20.02
9 73.7200 11.27 15.33 26.60 46.62 -20.02
QP
10 73.7200 6.27 15.33 21.60 36.62 -15.02
AVG
11 110.3200 3.69 16.11 19.80 47.97 -28.17
QP
12 110.3200 -2.21 16.11 13.90 37.97 -24.07
AVG
Report No.:
EM201200813-7
Application No.:
ZJ00024740
Page 26 of 47
Project No.:
ZJ00024740
Standard:
DP EN55013 QP
Power Source:
AC 230V/50Hz
Test item:
Power Clamp Test
Date:
2012-12-27
Temp./Hum.(%RH): 20.1/54%RH
Time:
21:29:21
EUT:
Wireless high-power speaker for
lighting connector
lighting connector
Model:
JBL ONBEAT RUMBLE
Test Result:
Pass
Note:
Test port: USB output port for charging
No.
Frequency
Reading
Correct
Result
Limit
Margin
Remark
(MHz)
(dBpW)
Factor(dB)
(dBpW)
(dBpW)
(dB)
1 30.5200 6.79 18.81 25.60 45.02 -19.42
QP
2 30.5200 -1.21 18.81 17.60 35.02 -17.42 AVG
3 64.9600 12.52 15.08 27.60 46.29 -18.69
3 64.9600 12.52 15.08 27.60 46.29 -18.69
QP
4 64.9600 8.32 15.08 23.40 36.29 -12.89 AVG
5 70.5600 14.24 15.26 29.50 46.50 -17.00
5 70.5600 14.24 15.26 29.50 46.50 -17.00
QP
6 70.5600 9.04 15.26 24.30 36.50 -12.20 AVG
7 73.7600 16.36 15.34 31.70 46.62 -14.92
7 73.7600 16.36 15.34 31.70 46.62 -14.92
QP
8 73.7600 11.56 15.34 26.90 36.62 -9.72
AVG
9 107.5200 8.13 16.07 24.20 47.87 -23.67
QP
10 107.5200 2.83 16.07 18.90 37.87 -18.97
AVG
Note: This device was tested in the Audio in, Audio in (Loading), Audio in (Headset), Audio in
(Headset and Loading), iPhone5, iPhone5 (Loading), iPhone5 (Headset), iPhone5 (Headset and
Loading), we found the worst rad
iation emission and
record it.
Report No.:
EM201200813-7
Application No.:
ZJ00024740
Page 27 of 47
5. IMMUNITY TEST
5.1 GENERAL DESCRIPTION
Product Standard
EN 55020:2007
Test set-up
Test specification
EN 55020:2007
EN 61000-4-2
Electrostatic Discharge – ESD:
8kV air discharge, 4kV Contact discharge
Performance Criterion B
8kV air discharge, 4kV Contact discharge
Performance Criterion B
EN 55020:2007
Immunity to RF Voltage of Mains, Loudspeaker,
headphone and audio connecters (S2a)
headphone and audio connecters (S2a)
EN 55020:2007
Immunity to ambient electromagnetic fields (S3)
EN 55020:2007
Immunity to electromagnetic fields Keyed Carrier (S5)
Report No.:
EM201200813-7
Application No.:
ZJ00024740
Page 28 of 47
5.2 GENERAL PERFORMANCE CRITERIA DESCRIPTION
Criteria A
The apparatus shall continue to operate as intended during the test. No
degradation of performance or loss of function is allowed below a performance
level (or permissible loss of performance) specified by the manufacturer, when
the apparatus is used as intended. If the minimum performance level or the
permissible performance loss is not specified by the manufacturer, then either of
these may be derived from the product description and documentation, and from
what the user may reasonably expect from the apparatus if used as intended.
Criteria B
The apparatus shall continue to operate as intended after the test. No degradation
of performance or loss of function is allowed below a performance level (or
permissible loss of performance) specified by the manufacturer, when the
apparatus is used as intended. During the test, degradation of performance is
allowed, however, no change of actual operating state or stored data is allowed. If
the minimum performance level or the permissible performance loss is not
specified by the manufacturer, then either of these may be derived from the
product description and documentation, and from what the user may reasonably
expect from the apparatus if used as intended.
Criteria C
Temporary loss of function is allowed, provided the function is self- recoverable
or can be restored by the operation of the controls, or by any operation specified in
the instructions for use. Not all functions of the apparatus need to be tested. The
selection, the specification of functions, and the permissible degradation is left to
the responsibility of the manufacturer.
Click on the first or last page to see other SPARK (serv.man8) service manuals if exist.