JBL SB 150 Service Manual ▷ View online
204001890
PLUSH-CLOTH W/TAPE FOR WALL MOUNT SB150
203005948
GIFT BOX 870x145x453 SB150
203005949
CARTON BOX SB150
M07
403000330
SOUNDBAR Power Board EU SB150
M08
404001418
MAIN PCBA (AUX+BT+OPTICAL) SB150
M12
404001372
TX MODULE BOARD SB150
M14
404001389
KEY PCBA SB150
M24
403000317
SUBWOOFER POWER BOARD EU SB150
M27
404001442
SUBWOOFER AMP PCBA SB150
M2
8
404001289
SUBWOOFER Wireless module (RX) SB150
100001004
20# WIRE 2P L=60MM SB150
100001381
28# Flat CABLE 9P L=80MM SB150
100001382
28# WIRE+24#CABLE2.0/7P to to 2.0/7P/L400
100001383
28# WIRE+24#CABLE2.0/7P to 2.0/7P/L100
100001401
22# SPEAKER WIRE 4P to 2.54/2P+HG5.2/2.8
100001402
22# WIRE 2P to HG2.8/5.2/L210 SB150
100000395
22# WIRE 4P L=100MM
100001419
22# WIRE 2P L340MM AMP TO WOOFER
U8 on MAIN BOARD
112000215
IC AX2228 (QFP-48)-C SB150
U7 on MAIN BOARD
112000258
IC GD25Q41(SOP8) SB150
U2 on MAIN BOARD
112000190
IC TD1509PR ADJ(SOP8)DC_DC SB150
U10 on MAIN BOARD
112000053
IC PCM1808(R-PDSO-G14) SB150
U11 on MAIN BOARD
112000202
IC TAS5731M(S-PQFP-G48) SB150
Electrical Parts
U11 on MAIN BOARD
112000202
IC TAS5731M(S PQFP G48) SB150
U3 on MAIN BOARD
112000267
IC PT8501 DD(LQFP80) SB150
U4 on MAIN BOARD
112000270
IC PCM5100A (TSSOP-20) SB150
U14 on MAIN BOARD
112000260
IC IA6005-25 (SOT23-5) SB150
U1,U9 on MAIN BOARD
112000261
IC IA6005-33 (SOT23-5) SB150
IC601 on Tx WIREless
MODULE
MODULE
112000053
IC PCM1808(R-PDSO-G14) SB150
IC602 on Tx WIREless
MODULE
MODULE
112000228
IC CE6200B33M(SOT23-5) SB150
U3 on SUBWOOFER
BOARD
BOARD
112000197
IC TPA3118D2(HTSSOP-32) SB150 SUBWOOFER
U1 on SUBWOOFER
BOARD
BOARD
112000257
IC ES7144LV(TSSOP-10) SB150 SUBWOOFER
U2,U4 on SUBWOOFER
BOARD
BOARD
112000297
IC D2761 (SSOP-10) SB150 SUBWOOFER
For US
104000016
POWER CORD/0.824X2(18AWG)-1.5M US SB150
For US
403000335
SOUNDBAR PSU PW282S-070-12 SB150
For US
403000336
SUBWOOFER PSU SB150
For US
203006228
GIFT BOX SB150 US
Reset and Firmware Upgrade Procedure
How to Reset/Factory restore?
Step1: Disconnect the soundbar power.
Step2: press and hold the “VOL +“ button on the soundbar and
connect the power at the same time.
Step3: waiting for 2~3 seconds, the Soundbar indicator will flash
and all the setting has being reset.
Step4: After reset action the soundbar will back to standby mode.
How to upgrade the firmware?
Step1: copy the upgrade file to the root of USB disk and chage
the file name and format to “APP.bin” .
Step2: Soundbar connect the power and set to the standby mode.
Step3: insert the USB disk to the set.
Step4: wait for 2 seconds then press the power button on the unit.
Step4: wait for 2 seconds then press the power button on the unit.
Step5:The red LED on “power” button of the panel will start to flash
, it indicates the system is in upgrade procedure, please
Step6: Waiting for the POWER LED stop flash and turn back to
normal, it indicates the upgrade procedure is success.
It takes around 1 minutes to the whole process.
Step7: Then pull out the USB disk.
don’t remove the power supply.
12-1
Revision List
Version
1.0
*
Initial Release
Dec. 2015
13-1
Version
1.1
*
The spare parts list updated ---- to aligh with the exploded views Dec. 2015
Revision List
Version
1.0
*
Initial Release
Dec. 2015
13-1
Version
1.1
*
The spare parts list updated ---- to aligh with the exploded views Dec. 2015