JBL ON STAGE III IIIP (serv.man6) EMC - CB Certificate ▷ View online
Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-E07439 page 9 of 66
2.2.5. PRINTER
2.2.6. MODEM
2.2.7. HEADPHONE
2.2.8. USB CABLE: Shielded, Detachable, 1.8m, (Bond one ferrite core)
EMC CODE
:
ACS-EMC-PT01
M/N
:
2225C
Manufacturer
:
HP
Data Cable
:
Shielded, Detachabled, 1.5m
Power Cord
:
Unshielded, Detachabled, 1.8m
FCC ID
:
BS46XU2225C
BSMI ID
:
N/A
EMC CODE
:
ACS-EMC-MD01
M/N
:
1414
S/N
:
980013578
Manufacturer
:
ACEEX
Data Cable
:
Shielded, Detachabled, 1.5m
Power Adaptor
:
Unshielded, Detachabled, 1.6
Adaptor Manufacturer :
TGL
Adaptor Model No
:
MDE130100TH
FCC ID
:
IFAXDM1414
BSMI ID
:
N/A
EMC CODE
:
ACS-EMC-EP01
M/N
:
OV880V
Manufacturer
:
OVANN
Data Cable
:
Shielded, Undetachabled, 4.0m
Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-E07439 page 10 of 66
2.3. Test Facility
Site Description
3m Anechoic Chamber
: Jun.13, 2006 File on Federal
Communication Commission
Registration Number: 90454
Registration Number: 90454
3m & 10m Anechoic Chamber
: Jan.31, 2007 File on Federal
Communication Commission
Registration Number: 794232
Registration Number: 794232
EMC Lab.
: Accredited by DATech, German
Registration Number: DAT-P-091/99-01
Feb. 02, 2004
Feb. 02, 2004
Accredited by NVLAP, USA
NVLAP Code: 200372-0
Apr.01, 2006
NVLAP Code: 200372-0
Apr.01, 2006
2.4. Measurement Uncertainty
No. Item
Uncertainty Remark
1.
Uncertainty for Conducted Emission Test
1.22dB
2.
Uncertainty for Radiated Emission Test
3.14dB
3m Chamber
3.
Uncertainty for Radiated Emission Test
3.18dB
10m Chamber
4.
Uncertainty for Power Clamp Test
1.38dB
Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-E07439 page 11 of 66
3. POWER LINE CONDUCTED EMISSION TEST
3.1. Test Equipments
Item Equipment
Manufacturer
Model No. Serial No.
Last Cal.
Cal. Interval
1. Test Receiver Rohde & Schwarz ESHS10
838693/001
May 11, 07 1 Year
2. L.I.S.N.#1
Rohde & Schwarz ESH2-Z5 834066/011
May 11, 07 1 Year
3. L.I.S.N.#3
EMCO
3825/2
9006-1660
May 11, 07 1 Year
4.
Terminator
Hubersuhner
50
Ω
No. 1
May 11, 07 1 Year
5. RF Cable
MIYAZAKI
5D-2W
LISN Cable 1# Feb.16, 07 1/2 Year
6. Coaxial Switch Anritsu
MP59B
M55367
Feb.16, 07 1/2 Year
7. Pulse Limiter Rohde & Schwarz ESH3-Z2 100340
Feb.16, 07 1/2 Year
3.2. Block Diagram of Test Setup
(EUT: Computer Speaker System)
3.3. Test Standard
EN55022: 1998+A1:2000+A2: 2003
3.4. Power Line Conducted Emission Limit
Limits dB(
μV)
Frequency
MHz
Quasi-peak Level
Average Level
0.15 ~
0.50
66 ~ 56*
56 ~ 46*
0.50 ~ 5.00
56
46
5.00 ~ 30.00
60
50
Notes: 1. *Decreasing linearly with logarithm of frequency.
2. The lower limit shall apply at the transition frequencies.
PC
AC Mains
L.I.S.N. #1
Test Receiver
Keyboard
Mouse
EUT
AC Mains
Printer
L.I.S.N. #3
a: Audio Cable
b: USB Cable
: Core
b: USB Cable
: Core
a
Adaptor
Modem
Adaptor
Monitor
Headphone
b
Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-E07439 page 12 of 66
3.5. EUT Configuration on Test
The following equipments are installed on conducted emission test to meet EN55022
requirement and operating in a manner which tends to maximize its emission
characteristics in a normal application.
requirement and operating in a manner which tends to maximize its emission
characteristics in a normal application.
3.5.1. Computer Speaker System (EUT)
Model Number
:
jbl on stage lll
Serial Number
: N/A
Manufacturer(1)
:
Zhao Yang Elec. (Shenzhen) Co., Ltd
Manufacturer(2)
:
Jie Hao Elec. (Su Zhou) Co., Ltd
3.5.2.Support Equipment : As Tested Supporting System Detail, in Section 2.2.
3.6. Operating Condition of EUT
3.6.1.Setup the EUT and simulator as shown as Section 3.2.
3.6.2.Turn on the power of all equipment.
3.6.3.Let the EUT work in test mode (Data Transmitting) and measure it.
3.7. Test Procedure
The EUT was placed on a non-metallic table, 80cm above the ground plane. The EUT
Via PC Power connected to the power mains through a line impedance stabilization
network (L.I.S.N. 1#). The other peripheral devices power cord connected to the power
mains through a line impedance stabilization network (L.I.S.N.#3). This provided a
50-ohm coupling impedance for the EUT (Please refer to the block diagram of the test
setup and photographs). Both sides of power line were checked for maximum conducted
interference. In order to find the maximum emission, the relative positions of equipments
and all of the interface cables were changed according to EN 55022 Class B on conducted
Disturbance test.
network (L.I.S.N. 1#). The other peripheral devices power cord connected to the power
mains through a line impedance stabilization network (L.I.S.N.#3). This provided a
50-ohm coupling impedance for the EUT (Please refer to the block diagram of the test
setup and photographs). Both sides of power line were checked for maximum conducted
interference. In order to find the maximum emission, the relative positions of equipments
and all of the interface cables were changed according to EN 55022 Class B on conducted
Disturbance test.
The bandwidth of the test receiver (R&S Test Receiver ESHS10) is set at 10kHz.
The frequency range from 150 kHz to 30 MHz is investigated. The test data and the
scanning waveform are listed in Section 3.8.
Click on the first or last page to see other ON STAGE III IIIP (serv.man6) service manuals if exist.