DOWNLOAD JBL ON BEAT RUMBLE (serv.man2) Service Manual ↓ Size: 913.16 KB | Pages: 61 in PDF or view online for FREE

Report No.:  EM201200813-6                Application No.:  ZJ00024740                        Page 49 of 61 

 

 

EN 61000-4-11:2004 

Voltage dips: 

30 during 25 periods, 
Meets the requirements of  Performance Criterion C 

Voltage interruption: 

100% during 0.5 cycles, 
100% during 1 cycles, 

Meets the requirements of Performance Criterion B 

100% during 250 cycles, 

Meets the requirements of Performance Criterion C 

10s for each dips at each test angle 

0° 

3 

 

a) The EUT and test generator were setup as shown on Section  

b) The interruptions is introduced at selected phase angles with specified duration. 

c)  Record any degradation of performance. 

                                                

 

Report No.:  EM201200813-6                Application No.:  ZJ00024740                        Page 50 of 61 

 

 

Wireless high-power speaker for lighting connector 

JBL OnBeat Rumble 

2013-01-04 

AC 230V/50HZ 

Liang 

Tem:20℃ Hum:51 %100kPa 

1. Test the EUT in BT, BT(Loading), BT (Headset),BT(Headset and 

Loading), Audio in, Audio in (Loading), Audio in (Headset), Audio in 
(Headset and Loading), iPhone5, iPhone5 (Loading), iPhone5 
(Headset), iPhone5 (Headset and Loading); 

2. Test the EUT in idle mode. 

 

(％ Reduction) 

Voltage 

dips 

30% 25  0°  A* PASS 

Voltage 

interruptions 

100% 0.5  0°  A*  PASS 

Voltage 

interruptions 

100% 1  0°  A* PASS 

Voltage 

interruptions 

100% 250  0°  C*  PASS 

Note: A*: There was no change compared with initial operation during the test. 

C* is within the acceptable criterion for Voltage Dips and Interruption test. 

 
 
 

Report No.:  EM201200813-6                Application No.:  ZJ00024740                        Page 51 of 61 

 

RE (Blowe 1GHz) 

 

 

RE (Above 1GHz) 

Report No.:  EM201200813-6                Application No.:  ZJ00024740                        Page 52 of 61 

 

CE 

 

 

Flicker