JBL ON BEAT MINI (serv.man2) EMC - CB Certificate ▷ View online
Page 72 of 99 Report No.: NTEK-2012DC1231016E
Test: Immunity Conducted Voltages S2a <1.19>
Injection Port: Mains Monitor Port: Speaker Rch
Operating Condition: AUX IN Wanted Signal: 1kHz sine wave single
Test Mode: Sound
Test Mode: Sound
Measure Comment: Result more than limit +10dB
Page 73 of 99 Report No.: NTEK-2012DC1231016E
Test: Immunity Conducted Voltages S2a <1.19>
Injection Port: Mains Monitor Port: Speaker Lch
Operating Condition: USB IN Wanted Signal: 1kHz sine wave single
Test Mode: Sound
Test Mode: Sound
Measure Comment: Result more than limit +10dB
Page 74 of 99 Report No.: NTEK-2012DC1231016E
Test: Immunity Conducted Voltages S2a <1.19>
Injection Port: Mains Monitor Port: Speaker Rch
Operating Condition: USB IN Wanted Signal: 1kHz sine wave single
Test Mode: Sound
Test Mode: Sound
Measure Comment: Result more than limit +10dB
Page 75 of 99 Report No.: NTEK-2012DC1231016E
4.10.2 IMMUNITY REQUIREMENTS FOR AUDIO INPUT AND OUTPUT CONNECTORS
(EXCLUDING LOUDSPEAKER AND HEADPHONE) (S2A)
4.10.2.1 LIMIT
4.10.2.2 TEST PROCEDURE
Measurement was performed in shielded room.
Instruments used were following CISPR 16-1 and EN 55020.
Measurement methods and operation conditions of EUT was according to clause 5.1, 5.2
and 5.7 of EN55020.:
Measurement was performed in shielded room.
Instruments used were following CISPR 16-1 and EN 55020.
Measurement methods and operation conditions of EUT was according to clause 5.1, 5.2
and 5.7 of EN55020.:
4.10.2.3 TEST SETUP
For the actual test configuration, please refer to the related Item –EUT Test Photos.
Click on the first or last page to see other ON BEAT MINI (serv.man2) service manuals if exist.