JBL E 150P EMC - CB Certificate ▷ View online
Page 29 of 47
Report No. 702268
IEC
60065
Clause
Requirement – Test
Result - Remark
Verdict
TRF No.: IEC60065F
TRF Originator: ASTA BEAB
Rear plastic
panel
panel
Chi Mei
Corporation
ABS, Polylac
PA-765A
Thinnest part 2.2mm
(1.5mm/V-1)
IEC60707
HB75
—
Plastic part of
speaker
terminals in
rear panel
speaker
terminals in
rear panel
Chi Mei
Corporation
ABS, Polylac
PA-765A
Thinnest part 3mm
(1.5mm/V-1)
IEC60707
HB75
—
Chi Mei
Corporation
ABS, Polylac
PA-765A
Thinnest part 2.7mm
(1.5mm/V-1)
IEC60707
HB75
—
PCB Kingboard
Laminates
FR-4,
KB-6150
alt. KB-6160
Thinnest part 1.7mm
(0.63mm/V-0)
IEC60707
V-1
—
1
) An asterisk indicates a mark which assures the agreed level of surveillance.
2
) Description to include adjacent markings for critical fuse/s.
Page 30 of 47
Report No. 702268
IEC
60065
Clause
Requirement – Test
Result - Remark
Verdict
TRF No.: IEC60065F
TRF Originator: ASTA BEAB
Group differences
IEC 60065:2001 + A1
CB Bulletin 112A / GRP 06 II
Contents
Add the following annexes:
Annex ZB (nominative) Special national conditions
Annex ZC (informative) A-deviations
P
3.1
Add the following indent at the end of the list
-
Exposure to excessive sound pressures
from headphones or earphones
from headphones or earphones
NOTE A new method of measurement is described in EN
50332-1, Sound system equipment: Headphones and
earphones associated
with portable audio equipment – Maximum sound pressure
level measurement methodology and limit considerations –
Part 1: General
method for ”one package equipment”, and in EN 50332-2,
Sound system equipment: Headphones and earphones
associated with
portable audio equipment – Maximum sound pressure level
measurement methodology and limit considerations – Part 2:
Guidelines to
associate sets with headphones coming from different
manufacturers.
50332-1, Sound system equipment: Headphones and
earphones associated
with portable audio equipment – Maximum sound pressure
level measurement methodology and limit considerations –
Part 1: General
method for ”one package equipment”, and in EN 50332-2,
Sound system equipment: Headphones and earphones
associated with
portable audio equipment – Maximum sound pressure level
measurement methodology and limit considerations – Part 2:
Guidelines to
associate sets with headphones coming from different
manufacturers.
P
4.1.1
Replace
the text of the note by:
NOTE For ROUTINE TEST reference is made to EN
50333
50333
.
P
5.1.i)
Add
the following note:
NOTE For RATED POWER CONSUMPTION
mesurements of TVs reference is made to EN 60107.
mesurements of TVs reference is made to EN 60107.
N/A
Page 31 of 47
Report No. 702268
IEC
60065
Clause
Requirement – Test
Result - Remark
Verdict
TRF No.: IEC60065F
TRF Originator: ASTA BEAB
6.1
Replace
the entire subclause by:
Apparatus including a potential source of ionizing
radiation shall be so constructed that personal
protection against ionizing radiation is provided
under normal operating conditions and under fault
conditions.
Compliance is checked by measurement under
the following conditions:
In addition to the normal operating conditions, all
controls adjustable from the outside BY HAND,
by any object such as a tool or a coin, and those
internal adjustments or pre-sets which are not
locked in a reliable manner, are adjusted so as to
give maximum radiation whilst maintaining an
intelligible picture for 1 h, at the end of which the
measurement is made.
radiation shall be so constructed that personal
protection against ionizing radiation is provided
under normal operating conditions and under fault
conditions.
Compliance is checked by measurement under
the following conditions:
In addition to the normal operating conditions, all
controls adjustable from the outside BY HAND,
by any object such as a tool or a coin, and those
internal adjustments or pre-sets which are not
locked in a reliable manner, are adjusted so as to
give maximum radiation whilst maintaining an
intelligible picture for 1 h, at the end of which the
measurement is made.
N/A
13.3.1
Delete
note 4.
P
14
Delete
note 4 and note 5.
P
15.1.1
Delete
notes 1 and 2.
P
15.2
Delete
note 2.
P
16.1
Delete
note 1.
P
16.2
Delete
the note.
P
20
Delete
note 2.
P
Page 32 of 47
Report No. 702268
IEC
60065
Clause
Requirement – Test
Result - Remark
Verdict
TRF No.: IEC60065F
TRF Originator: ASTA BEAB
Annex B
Replace
note 1 by:
In the CENELEC countries listed in IEC 62151,
special national conditions apply.
special national conditions apply.
N/A
Annex G
Delete
the note.
P
Annex J.2 Delete the notes of Table J.1.
N/A
Annex N
Add
after the introduction:
For ROUTINE TEST reference is made to EN
50333.
50333.
P
Bibliography
Add
the following standards:
EN 60332-1: 2000, Sound system equipement: Headphones and earphones
associated with portable audio equipment –
Maximum sound pressure level measurement methodology and limit
considerations – Part 1: General method for ”one package equipment”.
associated with portable audio equipment –
Maximum sound pressure level measurement methodology and limit
considerations – Part 1: General method for ”one package equipment”.
PrEN 50332-2 (uder consideration), Sound system equipement: Headphones and
earphones associated with portable
audio equipment – Maximum sound pressure level measurement methodology
and limit considerations – Part 2:
Guidelines to associate sets with headphones coming from different
manufacturers.
earphones associated with portable
audio equipment – Maximum sound pressure level measurement methodology
and limit considerations – Part 2:
Guidelines to associate sets with headphones coming from different
manufacturers.
Add the following notes for the standards indicated:
IEC 60130
NOTE
Parts 9 and 17: 1998 are harmonized as Ens (not modified).
IEC 60169
NOTE Partly harmonized in the EN 60169/HD 134 series (not modified).
IEC 60173
NOTE Harmonized as HD 27 S1: 1978 (not modified).
IEC 60335-2-56 NOTE
Harmonized as EN 60335-2-56: 1997 (not modified).
IEC 60335-2-82 NOTE Harmonized as EN 60335-2-82: 2000 (not modified).
IEC 60695
IEC 60695
NOTE Harmonized as EN 60695 series (not modified).
IEC 61040
NOTE Harmonized as EN 61040: 1992 (not modified).
IEC 61558-2-1
NOTE
Harmonized as EN 61558-2-1: 1997 (not modified).
IEC 61558-2-4
NOTE Harmonized as EN 61558-2-4: 1997 (not modified).
IEC 61558-2-6
NOTE Harmonized as EN 61558-2-6: 1997 (not modified).
P
Click on the first or last page to see other E 150P service manuals if exist.