JBL DSC 1000 (serv.man6) User Manual / Operation Manual ▷ View online
3
ENGLISH
FRONT PANEL CONTROLS
POWER ON/OFF (Standby): Press
the button once to place the system in
standby, press again to turn the
system off. Press the ON button on the
remote control to switch the unit from
standby to on.
Disc Tray. Place a disc on the tray.
PREV. While playing a disc,
press this button to select the
previous title, chapter or track.
the button once to place the system in
standby, press again to turn the
system off. Press the ON button on the
remote control to switch the unit from
standby to on.
Disc Tray. Place a disc on the tray.
PREV. While playing a disc,
press this button to select the
previous title, chapter or track.
NEXT. While playing a disc,
press this button to select the next
title, chapter or track.
A STOP. Stop playing a disc.
G PLAY. Play a disc.
REMOTE SENSOR. Receives the
remote control signals.
Front Panel Display. Indicate the
playing time, etc.
OPEN/CLOSE. Open or close the
disc tray.
press this button to select the next
title, chapter or track.
A STOP. Stop playing a disc.
G PLAY. Play a disc.
REMOTE SENSOR. Receives the
remote control signals.
Front Panel Display. Indicate the
playing time, etc.
OPEN/CLOSE. Open or close the
disc tray.
POWER LED.
Power On:
Power On:
ring lights blue
Standby:
ring lights orange
VOLUME. Increase or decrease
the master volume level.
SOURCE. Select the component
you want to use.
the master volume level.
SOURCE. Select the component
you want to use.
4
ENGLISH
FRONT PANEL DISPLAY
TEST
Source Indicators: These
indicators will light to show which
source is currently selected.
Status Bar. Shows operating
information, such as “OPEN”,
“CLOSE”and “LOADING”, etc. Shows
the type of disc playing: DVD, CD and
MP3, etc. Shows track and time
information of the CD or MP3 disc.
Shows the tuner band and frequency.
DVD-Audio Indicator: Illuminates
when a DVD-Audio section of a DVD-
Audio disc is playing.
Repeat Indicators: These
indicators light when any of the
Repeat functions are in use.
5.1ch Indicator: Lights when a 5.1
channel track is being played.
Random Indicator: This indicator
lights when Random has been
selected as playback mode.
PBC support: This indicator will
light to show that Play Back Control
(for VCD) is active.
indicators will light to show which
source is currently selected.
Status Bar. Shows operating
information, such as “OPEN”,
“CLOSE”and “LOADING”, etc. Shows
the type of disc playing: DVD, CD and
MP3, etc. Shows track and time
information of the CD or MP3 disc.
Shows the tuner band and frequency.
DVD-Audio Indicator: Illuminates
when a DVD-Audio section of a DVD-
Audio disc is playing.
Repeat Indicators: These
indicators light when any of the
Repeat functions are in use.
5.1ch Indicator: Lights when a 5.1
channel track is being played.
Random Indicator: This indicator
lights when Random has been
selected as playback mode.
PBC support: This indicator will
light to show that Play Back Control
(for VCD) is active.
V.OFF Indicator: Illuminates when
the video signal has been turned off
for better audio quality.
Progressive Scan Indicator: This
indicator will light when the
progressive scan video output has
been selected.
Playback-Mode Indicators: These
indicators light to show the current
playback mode.
Program Indicator:
This indicator lights when playing
back the programmed playlist.
Parental Lock Indicator: This
indicator lights when the parental-lock
system is engaged in order to prevent
anyone from changing the rating level
without a code.
the video signal has been turned off
for better audio quality.
Progressive Scan Indicator: This
indicator will light when the
progressive scan video output has
been selected.
Playback-Mode Indicators: These
indicators light to show the current
playback mode.
Program Indicator:
This indicator lights when playing
back the programmed playlist.
Parental Lock Indicator: This
indicator lights when the parental-lock
system is engaged in order to prevent
anyone from changing the rating level
without a code.
DISC TYPE Indicator: This
indicator shows what disc type is
currently playing.
ANGLE Indicator: This indicator
blinks when alternative viewing
angles are available on the DVD
currently playing.
A-B Repeat Indicator: This
indicator lights when a specific
passage for repeat playback has been
selected.
Test Indicator: This indicator lights
when the TV test screen is activated.
indicator shows what disc type is
currently playing.
ANGLE Indicator: This indicator
blinks when alternative viewing
angles are available on the DVD
currently playing.
A-B Repeat Indicator: This
indicator lights when a specific
passage for repeat playback has been
selected.
Test Indicator: This indicator lights
when the TV test screen is activated.
5
ENGLISH
REAR PANEL CONNECTIONS
Component Video Outputs:
Connect to the component video
inputs of your compatible video
device.
FM Antenna. Connect to the
supplied FM antenna.
Audio Out. Optional connection to
a TV set or external audio system (also
for recording devices).
Audio In. Connect to a line-level
analog audio source: TV, tape player,
Minidisc, PC, etc.
Connect to the component video
inputs of your compatible video
device.
FM Antenna. Connect to the
supplied FM antenna.
Audio Out. Optional connection to
a TV set or external audio system (also
for recording devices).
Audio In. Connect to a line-level
analog audio source: TV, tape player,
Minidisc, PC, etc.
SCART In/Out. Connect to a TV
SCART input. (SCART cable included.)
Video Out. Connect to a TV video
input. (Composite video cable not
included).
S-Video Out. Connect to a TV
S-Video input. (S-Video cable not
included).
Subwoofer Output. Connect to the
SUB/LFE input on the subwoofer.
AC Power Cord. Connect to a 230V
wall outlet.
SCART input. (SCART cable included.)
Video Out. Connect to a TV video
input. (Composite video cable not
included).
S-Video Out. Connect to a TV
S-Video input. (S-Video cable not
included).
Subwoofer Output. Connect to the
SUB/LFE input on the subwoofer.
AC Power Cord. Connect to a 230V
wall outlet.
Coaxial Digital Input: Connect the
coax digital output from a DVD player,
HDTV receiver, LD player, MD player,
satellite receiver or CD player to this
jack. The signal may be either a Dolby
Digital signal, DTS signal or a standard
PCM digital source. Do not connect
the RF digital output of an LD player to
these jacks.
Optical Digital Input: Connect the
optical digital output from a DVD
player, HDTV receiver, LD player, MD
player, satellite receiver or CD player
to this jack. The signal may be either a
Dolby Digital signal, DTS signal or a
standard PCM digital source. Do not
connect the RF digital output of an LD
player to these jacks.
Speaker Outputs: Connect the
colored plug at the end of the speaker
cables to the output of the
corresponding loudspeaker, marked
with the same color.
coax digital output from a DVD player,
HDTV receiver, LD player, MD player,
satellite receiver or CD player to this
jack. The signal may be either a Dolby
Digital signal, DTS signal or a standard
PCM digital source. Do not connect
the RF digital output of an LD player to
these jacks.
Optical Digital Input: Connect the
optical digital output from a DVD
player, HDTV receiver, LD player, MD
player, satellite receiver or CD player
to this jack. The signal may be either a
Dolby Digital signal, DTS signal or a
standard PCM digital source. Do not
connect the RF digital output of an LD
player to these jacks.
Speaker Outputs: Connect the
colored plug at the end of the speaker
cables to the output of the
corresponding loudspeaker, marked
with the same color.
6
ENGLISH
0
ON: Turns on the player when it is
in standby mode.
1
OFF: Turns off the player to
standby mode.
2
SUBTITLE: When a DVD is
playing, press to select a subtitle
language or to turn subtitles off.
language or to turn subtitles off.
3
TITLE: When a disc is playing,
press to show the number of the title
currently played. Press TITLE again to
jump to the subsequent title (with the
next title number) on the disc. Note
that this function works (most times)
even if title jump is prohibited by a
DVD´s playback control.
currently played. Press TITLE again to
jump to the subsequent title (with the
next title number) on the disc. Note
that this function works (most times)
even if title jump is prohibited by a
DVD´s playback control.
4
ANGLE: Press to access various
camera angles on a DVD (If the DVD
contains multiple camera angles).
contains multiple camera angles).
5
AUDIO: Press to access various
audio languages on a DVD (If the DVD
contains multiple audio streams).
contains multiple audio streams).
6
ENTER: Press this button to
activate a setting or option
7
OPEN/CLOSE: Press to open or
close the disc tray.
8
OSD: Press to access the On
Screen Display Menu
9
ARROW buttons (
‹
/
›
/
⁄
/
¤
):
Use to move the cursor in the OSD.
A
MUTE. Mutes the sound.
Loudspeaker icons will disappear from
the LCD display.
the LCD display.
B
DISC MENU: Displays the DVD
Disc Menu on the TV screen in play
mode.
mode.
C
PAUSE: Freezes a picture (with
DVD/VCD) and pauses the playback
signal (CD) when a disc is playing.
Press again for normal playback.
signal (CD) when a disc is playing.
Press again for normal playback.
D
STATUS: Press while a disc is
playing to view banner display. Use
the ARROW buttons to move through
the different features in the Banner
Display. When a symbol is highlighted,
press ENTER on the remote to select it.
the ARROW buttons to move through
the different features in the Banner
Display. When a symbol is highlighted,
press ENTER on the remote to select it.
REMOTE CONTROL
2
L
1
O
0
5
N
"
#
#
A
B
6
7
C
D
9
8
Q
H
E
G
J
F
I
+
K
3
P
.
M
4
Click on the first or last page to see other DSC 1000 (serv.man6) service manuals if exist.