DOWNLOAD JBL DSC 1000 (serv.man6) Service Manual ↓ Size: 1.02 MB | Pages: 30 in PDF or view online for FREE

E

PREVIOUS/STEP: Press to go to

beginning of current track. Press
again quickly to go to beginning of
previous track. After pressing the
PAUSE button, each press of this
button will move the image in reverse
frame by frame.

F

NEXT/STEP: Press to go to

beginning of next track. After pressing
the PAUSE button, each press of this
button will move the image forwards
frame by frame.

G

PLAY: Begins to play disc (closes

disc tray first, if it is open.)

H

SEARCH/SLOW (REV): Allows you

to search in reverse through a disc
while it is in play mode. Each time you
press this button, the search speed
changes as indicated by a number of
arrows on the right top of your screen.
After pressing the PAUSE button, each
press of this button will change the
slow down speed indicated by a
number of arrows in the right top of
the screen.

I

STOP: Stops playing a disc. When

a disc is playing, if you press STOP
and PLAY, the disc will resume play,
i.e. it will start from the same point on
the disc where the unit was stopped.
If you press STOP twice and the PLAY
button, the disc will start play from the
beginning.

J

SEARCH/SLOW (FWD): Allows

you to search forward through a disc
while it is in play mode. Each time you
press this button, the search speed
changes as indicated by a number of
arrows on the right top of your screen.
After pressing the PAUSE button, each
press of this button will change the
slow down speed as indicated by a
number of arrows in the right top of
the screen.

K

DISPLAY: Press to change the

brightness of the front panel display or
to turn the display off completely in
the following order: FULL
BRIGHTNESS 

➜

HALF BRIGHTNESS

➜

OFF 

➜

FULL BRIGHTNESS

L

PIC+/PIC-: Pressing these buttons

in JPEG mode will move to the
previous or next image.

M

ZOOM: When a DVD or VCD is

playing, press this button to zoom the
picture so that it is enlarged. There
are 4 steps to the zoom function, each
progressively larger. Press through
each of the zoom stages to return to a
normal picture.

N

PLAYLIST: Press this button to

change the playback order of the disc.

O

RANDOM: Press for playback in

random order.

P

A-B: Press to select section A-B

and to play repeatedly.

Q

VOLUME (+ or –). Increase/

decrease the master volume level.

 

PLAYER: Selects the internal

CD/DVD drive as input source.

+

NUMERIC KEYS: Select numbers

by pressing these buttons.

REPEAT: Press to go to the Repeat

menu. You can repeat a chapter, track
or the entire disc.

.

CLEAR: Press to remove the

Banner menu from the screen.

#

RADIO: Selects the internal FM

radio as input source

"

TV: Selects the audio/video device

connected to the SCART input as input
source

AUX: Selects the audio device

connected to the AUX input as input
source

DIGITAL IN: Selects the audio

device connected to the digital audio
input as input source

• The types of functions and operations

that can be used for a particular disc
vary depending on the features of
that disc. In some cases, these
functions and operations may differ
from the descriptions given in this
manual. In this event, follow the
instructions given on the screen. This
manual only covers basic disc
operations.

• For some operations, the 

/  icon may

appear on the screen. This indicates
that the operation described in this
manual is not available on the disc in
the player.

• On-screen and front panel display

illustrations in this manual are purely
for the purposes of explanation. The
actual displays may differ slightly
from these illustrations.

• The DVD will play any conventional

Audio CD or recordable (CD-R) or
erasable CD (CD-RW) bearing the
logos shown here, MP3, WMA 
(v8 & v9) or any VCD or DVD-Video
with the region code 0 or 2.

Disc formats supported by this player
The unit can play the following disc
formats (8 cm and 12 cm size): 

• DVD-AUDIO and DVD-VIDEO
• DVD-R
• DVD-RW
• DVD+R
• DVD+RW
• CD
• CD-R
• CD-RW
• VCD
• S-VCD

NOTE: Due to differences in the format
of certain discs, it is possible that
some discs may include a mix of
features that are not compatible with
the player. Similarly, although the
player is capable of a wide range of
features, not all discs include every
capability of the DVD system. 
For example, although the player is

compatible with multi-angle discs, that
feature is only possible when the disc
is specially encoded for multiple-angle
play. In addition, the player is capable
of playing back both Dolby Digital and
DTS soundtracks, but the number and
types of tracks available will vary from
disc to disc. To make certain that a
specific feature or soundtrack option
is available, please check the options
noted on the disc jacket.

• Playback capability for CD-R, CD-RW,

WMA, JPEG, MP3, VCD/SVCD, DVD-
R, DVD+R, DVD-RW and DVD+RW
discs may vary due to variations in
the quality of the disc and the
recorder used to create the disc.

Disc handling precautions
• To keep the disc clean, handle the

disc by its edge. Do not touch the
surface.

• Do not stick paper or tape on the

disc. If there is glue (or a similar
substance) on the disc, remove the
glue completely before using the
disc.

• Do not expose the disc to direct

sunlight or sources such as hot air
ducts, or leave it in a car parked in
direct sunlight as there can be a
considerable rise in temperature in-
side the car.

• After playing, store the disc in its

case.

• Do not write on the label side with a

ball-point pen or other writing
utensils.

• Be careful not to drop or bend the

disc.

Disc cleaning precautions
• Before playing, clean the disc with a

cleaning cloth. Wipe the disc from
the center out.

• Do not use solvents such as benzine,

thinner, commercially available
cleaners or anti-static spray intended
for vinyl LPs.

Disc installing precautions
• Do not install more than 1 disc on

disc tray.

• Do not place the disc on the tray up-

side down.

• Do not try to close the disc tray

when the disc is not installed and
centered properly.

DVD players and discs are designed
with regional restrictions which
dictate the regions in which a disc can
be played. If the region number on the
disc you want to play does not match
the region number of your DVD player,
you will not be able to play the disc.
The  message “REGION ERR” will
appear in the front panel display.
The region code of this player is
indicated on the rear and on the
external packaging.

• Be sure to follow correct polarity

when installing the batteries as
indicated in the battery compart-
ment. Reversed batteries may cause
damage to the device.

• Use only the size and type of

batteries specified.

• Do not mix different types of

batteries (e.g. Alkaline and Carbon-
zinc) or old batteries with new ones.

• If you will not use the remote for an

extended period of time, remove the
batteries to avoid possible damage
from battery leakage and corrosion.

FRONT R

CENTER

SURROUND R

SURROUND L

SPEAKER OUTPUTS

FRONT L

Caution: Always make certain that the controller and the subwoofer are turned off before connecting 
or disconnecting anything.

Connect the subwoofer cable
(included) to the output marked
"Subwoofer" on the controller and to
the input marked "SUB/LFE Input" on
the subwoofer. 

This sends the bass/Low Frequency
Effects signal to the subwoofer's own
100 Watt amplifier.

Your DSC system includes cables for
connection of all five satellite
speakers to the controller. Connect
the special error-proof connectors at
the color-coded rear panel of your
DSC. Connect the bare ends of the
speaker wire to your speakers, as
described in the loudspeaker system
owners manual. The lead with the
colored stripe is the "+", and needs to
be connected to the "+" terminal (red)
on the loudspeaker.

IMPORTANT NOTE: Do not use the
loudspeaker cable that is supplied in
the box of the speaker system, as
these cables do not have the special
connectors needed.

Connect the FM antenna to the 
75 Ohm FM antenna socket.

Notes:
• Be sure to fully extend the FM wire

antenna.

• After connecting the FM wire

antenna, keep it as horizontal as
possible. Move it until you receive
the best reception. 

If you have poor FM reception
Use a 75-ohm coaxial cable (not
included) to connect the system to an
outdoor FM antenna or to the radio
antenna connector on the wall for the
roof antenna on your house (if any).

Notes:
• If you connect the system to an

outdoor antenna, ground it against
lightning.

• To prevent a gas explosion, do not

connect the ground wire to a gas
pipe.