JBL CREATURE III (serv.man6) EMC - CB Certificate ▷ View online
Page 21 of 38
Report No. : W12-950-062
IEC
60950-1/Am1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IECEN60950_1C
Korea Testing Certification
4.7.3.2
Materials for fire enclosures
N/A
4.7.3.3
Materials for components and other parts outside
fire enclosures
fire enclosures
N/A
4.7.3.4
Materials for components and other parts inside
fire enclosures
fire enclosures
Min. V-2
P
4.7.3.5
Materials for air filter assemblies
N/A
4.7.3.6
Materials used in high-voltage components
N/A
5
ELECTRICAL REQUIREMENTS AND SIMULATED ABNORMAL CONDITIONS
N/A
5.1
Touch current and protective conductor current
N/A
5.1.1
General
Class III equipment
N/A
5.1.2
Configuration of equipment under test (EUT)
N/A
5.1.2.1
Single connection to an a.c. mains supply
N/A
5.1.2.2
Redundant multiple connections to an a.c. mains
supply
supply
N/A
5.1.2.3
Simultaneous multiple connections to an a.c. mains
supply
supply
N/A
5.1.3 Test
circuit
N/A
5.1.4
Application of measuring instrument
N/A
5.1.5 Test
procedure
N/A
5.1.6 Test
measurements
N/A
Supply
voltage
(V) ................................................ :
⎯
Measured touch current (mA) .............................. :
⎯
Max. allowed touch current (mA) ......................... :
⎯
Measured protective conductor current (mA) ...... :
⎯
Max. allowed protective conductor current (mA) .. :
⎯
5.1.7
Equipment with touch current exceeding 3,5 mA
N/A
5.1.7.1 General ................................................................. :
N/A
5.1.7.2
Simultaneous multiple connections to the supply
N/A
5.1.8
Touch currents to telecommunication networks and
cable distribution systems and from
telecommunication networks
cable distribution systems and from
telecommunication networks
N/A
5.1.8.1
Limitation of the touch current to a
telecommunication network or to a cable
distribution system
telecommunication network or to a cable
distribution system
N/A
Supply
voltage
(V) ................................................ :
⎯
Measured touch current (mA) .............................. :
⎯
Page 22 of 38
Report No. : W12-950-062
IEC
60950-1/Am1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IECEN60950_1C
Korea Testing Certification
Max. allowed touch current (mA) ......................... :
⎯
5.1.8.2
Summation of touch currents from
telecommunication networks
telecommunication networks
N/A
a) EUT with earthed telecommunication ports ..... :
N/A
b) EUT whose telecommunication ports have no
reference to protective earth
reference to protective earth
N/A
5.2 Electric
strength
N/A
5.2.1
General
(see appended table 5.2)
N/A
5.2.2
Test procedure
N/A
5.3
Abnormal operating and fault conditions
P
5.3.1
Protection against overload and abnormal
operation
operation
(see appended table 5.3)
P
5.3.2 Motors
N/A
5.3.3 Transformers
N/A
5.3.4 Functional
insulation
............................................. :
By short circuit
P
5.3.5 Electromechanical
components
N/A
5.3.6 Audio
amplifiers in ITE ......................................... :
P
5.3.7
Simulation of faults
(see appended table 5.3)
P
5.3.8 Unattended
equipment
N/A
5.3.9
Compliance criteria for abnormal operating and
fault conditions
fault conditions
P
5.3.9.1
During the tests
P
5.3.9.2
After the tests
(see appended table 5.3)
P
6
CONNECTION TO TELECOMMUNICATION NETWORKS
N/A
6.1
Protection of telecommunication network service persons, and users of other
equipment connected to the network, from hazards in the equipment
equipment connected to the network, from hazards in the equipment
N/A
6.1.1
Protection from hazardous voltages
N/A
6.1.2
Separation of the telecommunication network from earth
N/A
6.1.2.1
Requirements
(see appended table 5.2)
N/A
Supply
voltage
(V) ................................................ :
⎯
Current in the test circuit (mA) ........................... :
⎯
6.1.2.2 Exclusions ............................................................ :
N/A
6.2
Protection of equipment users from overvoltages on telecommunication
networks
networks
N/A
Page 23 of 38
Report No. : W12-950-062
IEC
60950-1/Am1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IECEN60950_1C
Korea Testing Certification
6.2.1 Separation
requirements
N/A
6.2.2
Electric strength test procedure
N/A
6.2.2.1
Impulse test
(see appended table 5.2)
N/A
6.2.2.2 Steady-state
test
(see appended table 5.2)
N/A
6.2.2.3 Compliance
criteria
N/A
6.3
Protection of the telecommunication wiring system from overheating
N/A
Max. output current (A) ........................................ :
⎯
Current
limiting method ........................................ :
⎯
7
CONNECTION TO CABLE DISTRIBUTION SYSTEMS
N/A
7.1 General
N/A
7.2
Protection of cable distribution system service
persons, and users of other equipment connected
to the system, from hazardous voltages in the
equipment
persons, and users of other equipment connected
to the system, from hazardous voltages in the
equipment
N/A
7.3
Protection of equipment users from overvoltages
on the cable distribution system
on the cable distribution system
N/A
7.4
Insulation between primary circuits and cable
distribution systems
distribution systems
N/A
7.4.1 General
N/A
7.4.2
Voltage surge test
(see appended table 5.2)
N/A
7.4.3
Impulse test
(see appended table 5.2)
N/A
A
ANNEX A, TESTS FOR RESISTANCE TO HEAT AND FIRE
N/A
A.1
Flammability test for fire enclosures of movable
equipment having a total mass exceeding 18 kg,
and of stationary equipment (see 4.7.3.2)
equipment having a total mass exceeding 18 kg,
and of stationary equipment (see 4.7.3.2)
N/A
A.1.1 Samples
................................................................
:
⎯
Wall thickness (mm) .............................................. :
⎯
A.1.2
Conditioning of samples; temperature (
°C) ......... : N/A
A.1.3
Mounting of samples ............................................ :
N/A
A.1.4
Test flame (see IEC 60695-11-3)
N/A
Flame A, B, C or D ............................................... :
⎯
A.1.5 Test
procedure
N/A
A.1.6 Compliance
criteria
N/A
Sample 1 burning time (s) ..................................... :
⎯
Page 24 of 38
Report No. : W12-950-062
IEC
60950-1/Am1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IECEN60950_1C
Korea Testing Certification
Sample 2 burning time (s) ..................................... :
⎯
Sample 3 burning time (s) ..................................... :
⎯
A.2
Flammability test for fire enclosures of movable equipment having a total mass not
exceeding 18 kg, and for material and components located inside fire enclosures
(see 4.7.3.2 and 4.7.3.4)
exceeding 18 kg, and for material and components located inside fire enclosures
(see 4.7.3.2 and 4.7.3.4)
N/A
A.2.1 Samples,
material ................................................. :
⎯
Wall thickness (mm) .............................................. :
⎯
A.2.2
Conditioning of samples; temperature (°C) ......... :
N/A
A.2.3
Mounting of samples ............................................ :
N/A
A.2.4
Test flame (see IEC 60695-11-4)
N/A
Flame A, B or C ................................................... :
⎯
A.2.5 Test
procedure
N/A
A.2.6 Compliance
criteria
N/A
Sample 1 burning time (s) ..................................... :
⎯
Sample 2 burning time (s) ..................................... :
⎯
Sample 3 burning time (s) ..................................... :
⎯
A.2.7
Alternative test acc. To IEC 60695-11-5, cl. 5 and 9
N/A
Sample 1 burning time (s) ..................................... :
⎯
Sample 2 burning time (s) ..................................... :
⎯
Sample 3 burning time (s) ..................................... :
⎯
A.3
Hot flaming oil test (see 4.6.2)
N/A
A.3.1
Mounting of samples
N/A
A.3.2
Test procedure
N/A
A.3.3 Compliance
criterion
N/A
B
ANNEX B, MOTOR TESTS UNDER ABNORMAL CONDITIONS (see 4.7.2.2 and
5.3.2)
5.3.2)
N/A
B.1 General
requirements
N/A
Position
................................................................
:
⎯
Manufacturer ........................................................ :
⎯
Type
.....................................................................
:
⎯
Rated
values ....................................................... :
⎯
B.2 Test
conditions
N/A
B.3
Maximum temperatures
(see appended table 5.3)
N/A
B.4
Running overload test
(see appended table 5.3)
N/A
Click on the first or last page to see other CREATURE III (serv.man6) service manuals if exist.