DOWNLOAD JBL CINEMA SOUND 3 (serv.man2) Service Manual ↓ Size: 1.98 MB | Pages: 95 in PDF or view online for FREE

 
 

Report No. JSH006110139-001 

Page 52 of 94  

 

11.6 Test protocol 

 

Inject Frequency(MHz) 

Sound(dBuV) 

Picture(dBuV) 

Mains 0.15-150.00 

* 

* 

“*” means margin > 6 dB 
 
12. Immunity requirements for the enclosure port (S3) 

12.1 Test result 

12.2 Operating environment 

 
Temperature:                           22

°C  

Relative Humidity:                  30%  

12.3 Test set-up 

 

The stripline was placed on non-metallic supports 0.8m from the floor, and the top conductor 

plate was no closer than 0.8m from the ceiling. 
The equipment under test is placed on a non-metallic support 0.1m high, in the centre of the stripline in 
the same position as for normal home usage. 
Connecting leads to the equipment under test are inserted through holes in the base conductor plate of 
the stripline, the length of the leads inside the stripline is as short as possible and completely 
surrounded by ferrite rings to attenuate induced currents. 
The mains lead is bundled to a length less than 30cm. 
Terminals of the equipment under test not used during the measurement are terminated with shielded 
resistors matching the nominal terminal impedance.

 

 
12.3.1  Photo For test Set-up 

 

none 

 

 
 

Report No. JSH006110139-001 

Page 53 of 94  

12.3.2  Figure For test Set-up 

 
 

Report No. JSH006110139-001 

Page 54 of 94  

12.4 Test protocol 
 

Frequency(MHz) Sound(dBuV)  Picture(dBuV) 

0.15-150.00 * 

* 

 
“*” means margin >6dBuV 

 
13. Measurement of screening effectiveness (S4) 

13.1 Test result 

13.2 Operating environment 

 
Temperature:                          20

°C  

Relative Humidity:                 45 %  
 

13.3 Test set up 

 
13.3.1  Photo For test Set-up 
 none 

 

13.3.2  Figure For test Set-up 

 

 
 

 
 

Report No. JSH006110139-001 

Page 55 of 94