DOWNLOAD Harman Kardon HS 300 (serv.man3) Service Manual ↓ Size: 3.49 MB | Pages: 82 in PDF or view online for FREE

Model
HS 300 (serv.man3)
Pages
82
Size
3.49 MB
Type
PDF
Document
EMC - CB Certificate
Brand
Device
Audio
File
hs-300-sm3.pdf
Date

Harman Kardon HS 300 (serv.man3) EMC - CB Certificate ▷ View online

 
 
Report No. JSH006030124-001 
Page 40 of 81  
Recorded data for test of input immunity from unwanted signals inside the VHF band II range 
 
Nf [dB(uV)] (75
Ω) 1kHz FN dev, 40kHz 
Fn(MHz) Ff(MHz) 
mono Stereo 
97.5 and 98.5 
NA 
90.0 
97.6 and 98.4 
NA 
90.0 
97.65 and 98.35 
NA 
97.7 and 98.3 
NA 
97.75 and 98.25 
NA 
97.8 and 98.2 
NA 
61.0 
97.85 and 98.15 
NA 
97.9 and 98.1 
NA 
97.925 and 98.075 
NA 
97.95 and 98.05 
NA 
97.975 and 98.025 
NA 
 
 
 
98 
98 NA 25.0 
“*” means margin > 6 dB 
 
 
Report No. JSH006030124-001 
Page 41 of 81  
 
8.2 Requirements for input immunity to RF voltages ( in differential mode) of television receivers 
and video tape equipment (including satellite television receivers) (S1, S1a) 
8.2.1 Test result 
 
           Pass               Fail              Not Applicable 
8.2.2 Operating environment 
 
Temperature:                           
°C  
Relative Humidity:                   %  
 
8.2.3 Test set-up 
 
 
Television receivers and video tape equipment with built-in television broadcast receiving 
facility in the RF recording mode shall be tested at a tuned television channel N and subjected to an 
unwanted signal in channel M, level nf, and of the following types: 
 Unwanted 
signal 
types: 
 
 
A:  an unwanted signal at the picture carrier frequency of the relevant channel M 
 
B: two unmodulated signals each at the level as given in the table, one at the relevant picture  
carrier frequency +0.5MHz and the other at the picture carrier frequency –0.5MHz. 
 
C: a modulated signal at the relevant sound carrier frequency, 1kHz FM at 30kHz deviation 
 
C shall be applied to receivers for countries in which moni-sound television signals of the  
systems B and G can be received. 
 
For television receivers for countries in which also two-sound-channel-television-signals of  
the systems B and G with two frequency modulated sound with two frequency modulated  
sound carriers can be received. 
 
 
 
C1: a modulated signal at the relevant frequency of the first sound carrier, 1kHz FM  
at 30 kHz deviation, and  
 
 
C2: a modulated signal at the relevant frequency of the second sound carrier, 1kHz  
FM at 30kHz deviation. 
C1 and C2 are applied simultaneously. 
 
 
D: a modulated signal at the relevant picture carrier frequency, 1kHz AM at 80% depth; 
 
E: a modulated signal 1kHz AM at 80% depth. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Report No. JSH006030124-001 
Page 42 of 81  
8.2.3.1 Photo For test Set-up 
8.2.4 Test protocol  
Channel Unwanted 
signal 
N+1 N-1 N+5 N-5 N+9 N+11 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Ni/E3 (Television 
Sound) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Ni/E3(Television 
Picture) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Niii/E9(Television 
Sound) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Niii/E9 (Television 
Picture) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Niv/E25 (Television 
Sound) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Niv/E25 (Television 
Picture) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Nv/E55 (Television 
Sound) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Nv/E55 (Television 
Picture) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Channel: 
375.25MHz 
(Television Sound) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Channel: 
375.25MHz 
(Television Picture) 
 
 
 
 
 
 
 
“*” means margin > 6 dB 
 
 
 
 
Report No. JSH006030124-001 
Page 43 of 81  
S1e  
Frequency (MHz) 
Level ([dB(uV)} e.m.f. 
26-30(Ni) / Television Picture 
 
26-30(Niii) / Television Picture 
 
26-30(Ni) / Television Sound 
 
26-30(Niii) / Television Sound 
 
“*” means margin > 10 dB 
 
8.3 Requirements for immunity to RF voltages ( in common mode) (S2b) 
8.3.1 Test result 
 
           Pass               Fail              Not Applicable 
 
8.3.2 Operating environment 
 
Temperature:                         20 
°C  
Relative Humidity:                45 %  
 
8.3.3 Test set-up 
 
The requirements for receivers,(including car radios and AM receivers), multifunction 
equipment and video tape equipment concerning the immunity to RF voltages in common model are 
restricted to the antenna terminals and to the frequency range form 26MHz to 30MHz. 
 
8.3.3.1 Photo For test Set-up 
8.3.4 Test protocol 
Limits of immunity to RF voltages of antenna terminals of receivers and multifunction equipment 
NA 
 
 
S2b  FM Mode 
Frequency (MHz) 
Level ([dB(uV)] 
e.m.f. 
26-30/FM Sound 
 “*” means margin > 6 dB 
 
 
 
 
 
 
 
 
 
 
 
 
 
Page of 82
Display

Click on the first or last page to see other HS 300 (serv.man3) service manuals if exist.