Harman Kardon DVD 49 (serv.man2) EMC - CB Certificate ▷ View online
- Page 5 of 42 -
Report
No.
98390
Summary of testing:
The apparatus under test is DVD player of insulation class II.
The apparatus have RCA, Optical, S-Video, HDMI OUT, USB* and MEMORY 1/2* terminals.
*) for model, DVD 49/230 only
The model, “DVD 39/230” is similar to tested model, “DVD 49/230”, except for USB and MEMORY1 / 2
terminals (removed).
The model, “DVD 39/230” and “DVD 49/230” will have two different mains input rating as follows,
- 220V 60Hz or
- 220-230V 50/60Hz.
The 220V input rating apparatus is only to be marketed in Korea.
The 220-230V input rating apparatus is only to be marketed in CENELEC countries and Singapore.
The 220V input rating is within range of tested 220-230V mains inputs, and limited tests were performed.
All tests were conducted at “DVD 49/230” model by representative model for severe tests.
Plug / External flexible cords:
This rest report does not cover the mains cord set. Must be supplied with an approved cord set suitable
for the countries where the equipment will be sold.
Instructions: Instructions/users manual is only in English. The information shall be given in
a language acceptable to the country where the apparatus is intended to be sold.
List of attachments:
ANNEX ZB TO EN 60 065, SPECIAL NATIONAL CONDITIONS
ANNEX ZC TO EN 60 065, A-DEVIATIONS
National Deviations for Singapore
Attachment, Tables to EN/IEC 60065 7
ANNEX ZC TO EN 60 065, A-DEVIATIONS
National Deviations for Singapore
Attachment, Tables to EN/IEC 60065 7
th
edition
Photos.
- Page 6 of 42 -
Report
No.
98390
Test item particulars .................................................. :
DVD PLAYER
Classification of installation and use ...................... :
Class II apparatus
Supply connection .................................................... :
Detachable,
see summary of testing.
Possible test case verdicts:
- test case does not apply to the test object ........... :
N/A
- test object does meet the requirement .................. :
Pass (P)
- test object does not meet the requirement ........... :
Fail (F)
Testing:
Date of receipt of test items………………………….:
December 26, 2007
Date(s) of performance of tests ................................ :
December 26, 2007 - January 15, 2008
General remarks:
The test results presented in this report relate only to the object tested.
This report shall not be reproduced, except in full, without the written approval of the Issuing testing
laboratory.
This report shall not be reproduced, except in full, without the written approval of the Issuing testing
laboratory.
"(see Enclosure #)" refers to additional information appended to the report.
"(see appended table)" refers to a table appended to the report.
Throughout this report, a point (coma) is used as the decimal separator.
"(see appended table)" refers to a table appended to the report.
Throughout this report, a point (coma) is used as the decimal separator.
List of test equipment must be kept on file and available for review.
General product information:
The sample(s) tested complies with the requirements of IEC 60065: 2001 + A1: 2005 / EN 60065: 2002
+ A1: 2006. Compliance with European Special National Conditions, Annex ZB, and A – Deviations,
Annex ZC, and tested according to national requirements for the following countries;
All CENELEC Countries listed in EN60065: 2002, Singapore and Korea, but Korean deviations are not
included in this report (not announced yet).
+ A1: 2006. Compliance with European Special National Conditions, Annex ZB, and A – Deviations,
Annex ZC, and tested according to national requirements for the following countries;
All CENELEC Countries listed in EN60065: 2002, Singapore and Korea, but Korean deviations are not
included in this report (not announced yet).
- Page 7 of 42 -
Report
No.
98390
3 GENERAL
REQUIREMENTS
Safety class of the apparatus ............................. :
Class II apparatus
—
4
GENERAL CONDITIONS OF TESTS
4.1.4
Ventilation instructions require the use of the test
box
box
No.
Tested in a wooden test
box according to standard
requirements.
Tested in a wooden test
box according to standard
requirements.
N/A
5 MARKING
Comprehensible and easily discernible
On front and rear side of
the enclosure.
the enclosure.
P
Permanent durability against water and petroleum
spirit
spirit
Tested with water / spirit
P
5.1 Identification,
maker, model ............................... :
Brand name and model
name marked.
See copy of marking plate.
name marked.
See copy of marking plate.
P
Class II symbol if applicable
Class II symbol is applied
in according to IEC 60417-
5172
in according to IEC 60417-
5172
P
Rated supply voltage and symbol ...................... :
“220V-230V” or “220V”
and AC-symbol (
~
) used.
P
Frequency if safety dependant
“50/60 Hz” or “60Hz”
P
Rated current or power consumption ............... :
25W
P
5.2 Earth
terminal
Class II apparatus.
N/A
Hazardous live terminals
No hazardous live
terminals
terminals
P
Supply output terminals (other than mains)
No socket outlet for
providing power to other
apparatus.
providing power to other
apparatus.
N/A
5.3
Use of triangle with exclamation mark
Correct symbol applied;
printed on rear side in
connection with CAUTION
of opening. Further,
no incorrect use of this
symbol found.
printed on rear side in
connection with CAUTION
of opening. Further,
no incorrect use of this
symbol found.
P
- Page 8 of 42 -
Report
No.
98390
5.4
Instructions for use
User information in the
following language: English.
See comments in
Summary of Testing.
following language: English.
See comments in
Summary of Testing.
P
5.4.1
Mains powered equipment not exposed to
dripping or splashing. Warning concerning
objects filled with liquid, etc.
dripping or splashing. Warning concerning
objects filled with liquid, etc.
The user manual includes
information about danger
concerning dripping or
splashing and objects filled
with liquids.
information about danger
concerning dripping or
splashing and objects filled
with liquids.
P
Hazardous live terminals, instructions for wiring
No hazardous live terminals
N/A
Instructions for replacing lithium battery
No lithium battery in the
equipment
equipment
N/A
Instructions for modem if fitted
No modem.
N/A
Class I earth connection warning
Class II apparatus.
N/A
Instructions for multimedia system connection
Not applicable
N/A
Special stability warning for fixed installation
Not for fixed installation.
N/A
Warning: battery exposure to heat
No battery.
N/A
Warning: protective film on CRT face
No CRT
N/A
5.4.2
Disconnect device: plug/coupler or all-pole mains
switch location, accessibility and markings
switch location, accessibility and markings
Appliance coupler is
regarded as disconnect
device, and is readily
operable.
regarded as disconnect
device, and is readily
operable.
P
Instructions for permanently connected
equipment
equipment
Not permanently
connected equipment
connected equipment
N/A
Click on the first or last page to see other DVD 49 (serv.man2) service manuals if exist.