Harman Kardon DVD 37 (serv.man3) EMC - CB Certificate ▷ View online
- Page 2 of 10 -
www.nemko.com
Report No. 69608
Name and address of production-sites (Factories):
Factory 1:
Anam Electronics Co., Ltd.
645, Sungkok-Dong, Ansan-City, Kyungki-Do, Korea
645, Sungkok-Dong, Ansan-City, Kyungki-Do, Korea
Factory 2:
DongGuan LiaoBu Anam Electronics.
Xin Cheng Management Area, LiaoBu Town, DongGuan City, GuangDong Province, China.
Xin Cheng Management Area, LiaoBu Town, DongGuan City, GuangDong Province, China.
Summary of testing:
This amendment test report, 69608 is covering the added variant model, ”DVD 37/230”.
Added variant model, ”DVD 37/230” is identical to earlier tested and certified model, ”DVD 47/230”,
except for some components in the secondary side (SACD Chip IC-Deleted) and non-detachable supply
cord (changed from inlet with detachable supply cord).
This amendment test report 69608, must always be presented together with the main test report 65335.
Added variant model, ”DVD 37/230” is identical to earlier tested and certified model, ”DVD 47/230”,
except for some components in the secondary side (SACD Chip IC-Deleted) and non-detachable supply
cord (changed from inlet with detachable supply cord).
This amendment test report 69608, must always be presented together with the main test report 65335.
- Page 3 of 10 -
www.nemko.com
Report No. 69608
Copy of marking plate:
Marking for model, DVD 37/230
- Page 4 of 10 -
www.nemko.com
Report No. 69608
5 MARKING
Comprehensible and easily discernible
On front and rear side of the
enclosure.
enclosure.
P
Permanent durability against water and petroleum
spirit
spirit
Tested with water / spirit
P
5.1 Identification,
maker, model ................................... :
Brand name and model name
marked,
see copy of marking plate.
marked,
see copy of marking plate.
P
Class II symbol if applicable
Class II symbol is applied in
according to IEC 60417-5172.
according to IEC 60417-5172.
P
Rated supply voltage and symbol .......................... :
230V and AC-symbol (
~
) used
P
Frequency if safety dependant
50Hz
P
Rated current or power consumption ..................... :
13W
P
8
CONSTRUCTIONAL REQUIREMENTS WITH REGARD TO THE PROTECTION
AGAINST ELECTRIC SHOCK
AGAINST ELECTRIC SHOCK
8.9
Adequate insulation between internal hazardous
live conductors and accessible parts
live conductors and accessible parts
External supply cord only,
double insulated.
double insulated.
P
8.11
Detaching of wires
P
No undue reduction of creepages or clearance
distances if wires become detached
distances if wires become detached
Primary wires in external
cords connected with multi-
contact-housing.
cords connected with multi-
contact-housing.
P
8.19
Disconnection from the mains
See below
P
8.19.1 Disconnect
device
Mains plug is used as
disconnect device
disconnect device
P
15 TERMINALS
15.1.1
Mains plug, appliance inlet, interconnection
couplers and mains socket-outlet meet the
appropriate standard
couplers and mains socket-outlet meet the
appropriate standard
Approved mains plug provided.
See list of critical components.
See list of critical components.
P
15.1.2
Connectors for antenna, earth, audio, video or data:
P
No risk of insertion in mains socket-outlets
Standard connectors provided
for S-Video, SCART, Optical,
HDMI (optional) and RCA
terminals.
for S-Video, SCART, Optical,
HDMI (optional) and RCA
terminals.
P
- Page 5 of 10 -
www.nemko.com
Report No. 69608
16
EXTERNAL FLEXIBLE CORDS
16.1
Mains cords sheathed type, complying with
IEC 60227 for PVC or IEC 60245 for synthetic
rubber cords ............................................................ :
IEC 60227 for PVC or IEC 60245 for synthetic
rubber cords ............................................................ :
Sheathed PVC cord
complying with IEC 60227
complying with IEC 60227
P
Non-detachable cords for Class I have
green/yellow core for protective earth
green/yellow core for protective earth
Class II apparatus
N
16.2
Mains cords conductors have adequate cross-
sectional area for rated current consumption of the
equipment
sectional area for rated current consumption of the
equipment
The cord is 0,75mm², within the
current rating
current rating
P
16.3
a) Flexible cords not complying with 16.1, used for
interconnections between separate units of
equipment used in combination and carrying
hazardous live voltages, have adequate dielectric
strength
interconnections between separate units of
equipment used in combination and carrying
hazardous live voltages, have adequate dielectric
strength
No interconnecting cables
comprising hazardous live
conductors.
comprising hazardous live
conductors.
N
b) Flexible cords not complying with 16.1,
withstand bending and mechanical stress (3.2 of
IEC 60227-2)
withstand bending and mechanical stress (3.2 of
IEC 60227-2)
Cord complying with 16.1.
N
16.4
Flexible cords used for connection between
equipment have adequate cross-sectional areas to
avoid temperature rise under normal and fault
conditions
equipment have adequate cross-sectional areas to
avoid temperature rise under normal and fault
conditions
Cords have adequate cross-
sectional areas to avoid
temperature rise under normal
and fault conditions.
sectional areas to avoid
temperature rise under normal
and fault conditions.
P
16.5
Adequate strain relief on external flexible cords
Cord clip wedged in the
enclosure
enclosure
P
Not possible to push cord back into equipment
Checked by inspection
P
Strain relief device unlikely to damage flexible cord
No sharp edges
P
For mains cords of Class I equipment, hazardous
live conductors become taut before earth
conductor
live conductors become taut before earth
conductor
Class II apparatus.
N
16.6
Apertures for external flexible cord: no risk of
damage to the cord during assembly or movement
in use
damage to the cord during assembly or movement
in use
No sharp edges
P
16.7
Transportable musical instruments and amplifiers
fitted with detachable cord set with appliance inlet
to IEC 60320-1
fitted with detachable cord set with appliance inlet
to IEC 60320-1
No such apparatus.
N
Transportable musical instruments and amplifiers
fitted with detachable cord sets or with means of
stowage to protect the cord
fitted with detachable cord sets or with means of
stowage to protect the cord
No such apparatus.
N