Harman Kardon DMC 250 (serv.man2) Service Manual ▷ View online
12 REAR PANEL CONNECTIONS
Rear Panel Connections
1
3
5
6
8
9
C
0
3
4
7
A
B
2
0 Optical Digital Output
1 Coaxial Digital Output
2 AC Power Cord
3 Composite Video Output
4 S-Video Output
5 Component Video Outputs
6 Scart TV Output
7 Remote Control Output
8 Remote Control Input
9 Analog Audio Output
A HDMI Output
B 6-Channel Audio Outputs
C Analog Audio Input
0 Optical Digital Output: Connect this jack
to the optical digital input of an A/V receiver or
surround processor for Dolby Digital, DTS or
PCM audio playback.
1 Coaxial Digital Output: Connect this jack
to the coaxial digital input of an A/V receiver or
surround processor for Dolby Digital, DTS or
PCM audio playback.
to the optical digital input of an A/V receiver or
surround processor for Dolby Digital, DTS or
PCM audio playback.
1 Coaxial Digital Output: Connect this jack
to the coaxial digital input of an A/V receiver or
surround processor for Dolby Digital, DTS or
PCM audio playback.
NOTE: The coaxial digital output should only be
connected to a digital input. Even though it is
the same RCA-type connector as standard
analog audio connections, DO NOT connect it to
a conventional analog input jack.
connected to a digital input. Even though it is
the same RCA-type connector as standard
analog audio connections, DO NOT connect it to
a conventional analog input jack.
Connect either the Optical Digital Audio
Output
Output
0 or the Coaxial Digital Audio
Output
1 to a corresponding digital audio
input on your receiver or processor, but not both.
2 AC Power Cord: Connect this plug to an
AC outlet. If the outlet is controlled by a switch,
make certain that it is in the ON position.
3 Composite Video Output: Connect this
jack to the video input on a television or video
projector, or to a video input on an A/V receiver
or processor if you are using that type of device
for video input switching.
4 S-Video Output: Connect this jack to the
S-Video input on a television or video projector,
or to an S-Video input on an A/V receiver or
processor if you are using that type of device for
S-Video input switching.
5 Component Video Outputs: These out-
puts carry the component video signals for
connection to display monitors with component
video inputs. For standard analog TV's or
projectors with inputs marked Y/Pr/Pb or
Y/Cr/Cb, connect these outputs to the correspon-
ding inputs. If you have a high-definition televi-
sion or projector that is compatible with high
scan rate progressive video, connect these jacks
to the “HD Component” inputs. Note that if you
are using a progressive scan display device, then
2 AC Power Cord: Connect this plug to an
AC outlet. If the outlet is controlled by a switch,
make certain that it is in the ON position.
3 Composite Video Output: Connect this
jack to the video input on a television or video
projector, or to a video input on an A/V receiver
or processor if you are using that type of device
for video input switching.
4 S-Video Output: Connect this jack to the
S-Video input on a television or video projector,
or to an S-Video input on an A/V receiver or
processor if you are using that type of device for
S-Video input switching.
5 Component Video Outputs: These out-
puts carry the component video signals for
connection to display monitors with component
video inputs. For standard analog TV's or
projectors with inputs marked Y/Pr/Pb or
Y/Cr/Cb, connect these outputs to the correspon-
ding inputs. If you have a high-definition televi-
sion or projector that is compatible with high
scan rate progressive video, connect these jacks
to the “HD Component” inputs. Note that if you
are using a progressive scan display device, then
”Progressive” must be selected in the Video
Set-up Menu in order to take advantage of the
progressive scan circuitry. See page 22 for more
information on progressive scan video.
Set-up Menu in order to take advantage of the
progressive scan circuitry. See page 22 for more
information on progressive scan video.
IMPORTANT: These jacks should NOT be
connected to standard composite video inputs.
6 SCART OUT (TV): If your TV has a SCART
socket, you can connect a SCART cable to your
TV and to your DMC 250 Player for improved
video quality. The SCART cable carries both
audio and video. You can select Composite Video
or RGB video for that SCART connector’s video
output signal.
7 Remote Control Output: Connect this
jack to the infrared (IR) input jack of another
compatible Harman Kardon remote controlled
product to have the built-in Remote Sensor on
the DMC 250 provide IR signals to other com-
patible products.
8 Remote Control Input: Connect the
output of a remote infrared sensor, or the
remote control output of another compatible
Harman Kardon product, to this jack. This will
enable the remote control to operate even when
the front panel Remote Sensor on the
DMC 250 is blocked. This jack may also be used
with compatible IR remote control-based
automation systems.
9 Analog Audio Output: Connect these
jacks to an audio input on an A/V receiver or
surround processor for analog audio playback.
A HDMI Output: If you have an HDMI-com-
patible receiver or video display device, connect
this output to an HDMI input on the receiver or
video display for the highest-quality uncom-
pressed digital audio and video available. Even if
your receiver is not capable of processing audio
in the HDMI format, you may still experience the
superb reproduction of HDMI video.
connected to standard composite video inputs.
6 SCART OUT (TV): If your TV has a SCART
socket, you can connect a SCART cable to your
TV and to your DMC 250 Player for improved
video quality. The SCART cable carries both
audio and video. You can select Composite Video
or RGB video for that SCART connector’s video
output signal.
7 Remote Control Output: Connect this
jack to the infrared (IR) input jack of another
compatible Harman Kardon remote controlled
product to have the built-in Remote Sensor on
the DMC 250 provide IR signals to other com-
patible products.
8 Remote Control Input: Connect the
output of a remote infrared sensor, or the
remote control output of another compatible
Harman Kardon product, to this jack. This will
enable the remote control to operate even when
the front panel Remote Sensor on the
DMC 250 is blocked. This jack may also be used
with compatible IR remote control-based
automation systems.
9 Analog Audio Output: Connect these
jacks to an audio input on an A/V receiver or
surround processor for analog audio playback.
A HDMI Output: If you have an HDMI-com-
patible receiver or video display device, connect
this output to an HDMI input on the receiver or
video display for the highest-quality uncom-
pressed digital audio and video available. Even if
your receiver is not capable of processing audio
in the HDMI format, you may still experience the
superb reproduction of HDMI video.
If your video display has a DVI input, you may
use an optional HDMI-to-DVI cable or adapter
use an optional HDMI-to-DVI cable or adapter
for the connection to the display. In all cases, the
video display must be HDCP-compliant in order
to use the HDMI output. For best results, we do
not recommend HDMI connections in excess of
ten feet.
video display must be HDCP-compliant in order
to use the HDMI output. For best results, we do
not recommend HDMI connections in excess of
ten feet.
The following audio formats may be output via
the HDMI connection:
the HDMI connection:
Audio CD – 2-Channel PCM or 5.1-channel DTS
DVD-Audio – 2-Channel or 5.1-channel PCM
DVD-Video – Up to 5.1-channel Dolby Digital or
DTS
DTS
Note: To hear the high-resolution surround
sound recorded on DVD-Audio discs, you need
to connect the 6-Channel Audio Outputs
sound recorded on DVD-Audio discs, you need
to connect the 6-Channel Audio Outputs
B
to the corresponding input jacks on your receiver
or processor. These formats are not output digi-
tally.
B 6-Channel Audio Outputs: Connect these
outputs to the matching 6-channel analog audio
inputs on your receiver or surround sound
processor. This connection is required to listen to
the multichannel tracks on DVD-Audio discs. If
the disc also contains a linear PCM, Dolby
Digital or DTS track, you may listen to it using
the HDMI
or processor. These formats are not output digi-
tally.
B 6-Channel Audio Outputs: Connect these
outputs to the matching 6-channel analog audio
inputs on your receiver or surround sound
processor. This connection is required to listen to
the multichannel tracks on DVD-Audio discs. If
the disc also contains a linear PCM, Dolby
Digital or DTS track, you may listen to it using
the HDMI
A, Optical 0 or Coaxial Dgital
Audio Output
1 or the Analog Audio
Outputs
9.
Note: You’ll find more details about all
Audio/Video connections under Setup and
Connections on the following pages.
C Analog Audio Inputs: Connect these jacks
to an audio output on a source player like a tape
deck or record player for analog audio recording.
Audio/Video connections under Setup and
Connections on the following pages.
C Analog Audio Inputs: Connect these jacks
to an audio output on a source player like a tape
deck or record player for analog audio recording.
harman/kardon
DMC250/230 Service Manual
Page 5 of 110
4. PACKING VIEW
4.2 DMC250/230
Ref. No.
Part No.
Part Name
Remarks
Q'ty
NEW
1
CPG1A826Y
BOX , OUT CARTON
1
2
CPB1A180Z
BAG, POLY(SET)
1
3
CQB1A551Z
LABEL, BAR CODE
3
4
CQB1A857Z
LABEL, DTS
1
5
CPS1A759
PAD, SNOW-R
1
6
CPS1A758
PAD, SNOW-L
1
7
CPS1A765
PAD, CENTER
1
8
CQXDMC250/230
INSTRUCTION MANUAL ASS'Y
1
8-1
CQX1A1258Z
MANUAL , INSTRUCTION
1
8-2
HQE1A273Z
HARMAN IMAGE BROCHURES
1
8-3
CJS0I006Z
CABLE, S-VHS(1.5M)
1
8-4
CJS9D002Z
CORD , JACK(MONO) 1200MM
1
8-5
CJS4S004Z
CORD , PIN(3P,W/R/Y)
1
8-6
CJA2B020Z
CORD , POWER
1
8-7
CABR6P
BATTERY (SIZE 'AA')
2
8-8
CARTDMC250
REMOCON ASS'Y
1
8-9
CJS8T001Z
CABLE, HDMI(2M)
1
8-10
CPB1061W
BAG, POLY(MANUAL)
1
9
CQB1A741Z
LABEL, ORIGIN
1
harman/kardon
DMC250/230 Service Manual
Page 6 of 110
harman/kardon
DMC250/230 Service Manual
Page 7 of 110
DMC 250/230 ELECTRICAL PARTS LIST
Ref#
Component
Description
Value
CHE154
CLAMPER , ARM
CPG1A826Y
BOX , OUT CARTON DMC250/230
CPS1A758
PAD , SNOW(L)
CPS1A759
PAD , SNOW(R)
CPS1A765
PAD , CENTER
DMC250
CQB1A549Y
LABEL , ATTENTION DVD48
CQB1A551Z
LABEL , BAR CODE
CQB1A622
LABEL , SERIAL NO
CQB1A741Z
ORIGIN LABEL
CQB1A744Z
LABEL, DIVX
CQB1A876Z
LABEL , COUNTRY DVD29/230
CQXDMC250/230
INSTRUCTION MANUAL ASS'Y
CARTDMC250
REMOCON ASS'Y
CJA2B020Z
CORD , POWER
CJS0I006Z
CABLE, S-VHS(1.5M)
Y, C
CJS4S004Z
CORD , PIN(3P,W/R/Y)
CJS8T001Z
CABLE, HDMI(2M)
CBADV-005-2
CJS9D002Z
CORD , JACK(MONO) 1200MM
CQX1A1258Z
MANUAL , INSTRUCTION DMC250/230
CGR1A411ZA
DVD DOOR ASS'Y(DMC250)
DMC250
CGR1A410
ORNAMENT , DOOR
CGR1A411A25
DOOR , DVD
CGR1A412R4B24
COVER , BACK DMC250
CGWDMC250/230
FRONT PANEL ASS'Y
CBT2A1029ZA
FUNCTION KNOB ASS'Y
CBT2A1029MMZB24
KNOB , FUNCTION DMC250
CGX1A383Z
SHEET , LED
CMH2A280
HOLDER , KNOB
CGB1A158Y
BADGE , FRONT HARMAN/KARDON
CGB1A172Y
BADGE , DMC250
CGL1A266Y
INDICATOR , POWER DVD29
CGW2A428YA
DMC250/230 FRONT PANEL ASS'Y
CBT1A1030MMZB17
KNOB , OPEN
CGU1A400A25Z
WINDOW , FIP
CGW2A428R4YB24
PANEL , FRONT DMC250/230
CGX1A385
COVER , SHEET
DMC250
CGX1A395C66
SHEET , AL FRONT DMC250
CHG1A305
CUSHION , SUPPORT
CMC1A341
PLATE , EARTH DMC250
CMD1A604
BRACKET , USB
CMD1A655
FRAME , FRONT
CMD1A682
BRACKET , HOLDER
CMX1A227
SHEET , CARD DMC250
CMZ1A118Z
FILTER , FIP
COP11950B
FRONT/CARD PCB ASS'Y
DMC250
CIP11950B
FRONT/CARD AUTO PCB ASS'Y
DMC250
CIP11950BSMD
FRONT/CARD SMD PCB ASS'Y
DMC250
CIP11950BBSMD
FRONT/CARD BOTTOM SMD PCB ASS'Y
DMC250
C202
CCUS1H104KC
CAP , CHIP
0.1UF 50V K
C203
CCUS1H104KC
CAP , CHIP
0.1UF 50V K
C214
CCUS1H104KC
CAP , CHIP
0.1UF 50V K
C217
CCUS1H102KC
CAP , CHIP
1000PF 50V K
C333
CCUS1H220JA
CAP , CHIP
22PF 50V J
C334
CCUS1H220JA
CAP , CHIP
22PF 50V J
C335
CCUS1H220JA
CAP , CHIP
22PF 50V J
C336
CCUS1H220JA
CAP , CHIP
22PF 50V J
C337
CCUS1H220JA
CAP , CHIP
22PF 50V J
C904
CCUS1H104KC
CAP , CHIP
0.1UF 50V K
R203
CRJ10DJ681T
RES , CHIP
1608 SIZE
R204
CRJ10DJ103T
RES , CHIP
1608 SIZE
R205
CRJ10DJ331T
RES , CHIP
R227
CRJ10DJ333T
RES , CHIP
1608 SIZE
R228
CRJ10DJ100T
RES , CHIP
1608 SIZE
R229
CRJ10DJ103T
RES , CHIP
1608 SIZE
R905
CRJ104DJ301T
RES , ARRAY 300R (1608*4)
R906
CRJ104DJ301T
RES , ARRAY 300R (1608*4)
R907
CRJ104DJ301T
RES , ARRAY 300R (1608*4)
R909
CRJ104DJ301T
RES , ARRAY 300R (1608*4)
R910
CRJ104DJ301T
RES , ARRAY 300R (1608*4)
harman/kardon
DMC250/230 Service Manual
Page 8 of 110
Click on the first or last page to see other DMC 250 (serv.man2) service manuals if exist.