Harman Kardon BDS 580S (serv.man2) Service Manual ▷ View online
harman/kardon
Service Information
BDS 280 + BDS 580
October 2013
Harman International
8500 Balboa Blvd., Northridge, CA 91329, USA
Near Field Communication (NFC) and Bluetooth pairing instructions.
This software procedure allows you to replace an NFC Board or a VFD Display Control Board in the BDS 280/230
and BDS 580/230.
IMPORTANT: This update must be performed in an ESD protected environment!
To perform this pairing, the following equipment is needed:
•
Android NFC mobile phone
•
Special Android App installed on mobile phone
The Android App is to be downloaded from the FTP server:
IP:ftp2.harman.com
Login: ServiceLevel1
Password: !s3rv1c3L
Direct access with a web browser:
ftp://servicelevel1:!s3rv1c3L@ftp2.harman.com/Service/Level1
Procedure:
1.
Disassemble the BDS unit by removing the top cover.
2.
Locate the BT-module and the label with BT address on the VDF Display Control board.
3.
Turn on the special App already installed on the mobile phone.
4.
Select BT Module Type - for BDSx80 select: BM153.
5.
Scan the label on the BT-module or enter the address manually in MAC ADRESS line.
In this case the BT address is: 7BE214
6.
Press here to enter address manually.
7.
Remount the top cover on the BDS. Power on the BDS.
Harman Kardon
BDS 280 + 580 Service Manual
Page 85 of 87
8.
On the app enter the device name:
•
For BDS280 enter name: BDS280_BT
•
For BDS580 enter name: BDS580_BT
9.
Press “Write to tag” and then move the NFC mobile phone close to the NFC point at the top cover on the
BDS.
Harman Kardon
BDS 280 + 580 Service Manual
Page 86 of 87
10.
When pairing is successful, the app will show a green ”V”
Harman Kardon
BDS 280 + 580 Service Manual
Page 87 of 87
Click on the first or last page to see other BDS 580S (serv.man2) service manuals if exist.