Harman Kardon AVR 135 (serv.man2) EMC - CB Certificate ▷ View online
Reference No. : 54120503A Page 15
◀ Anam EMC Test Laboratory ▶
Limit(㏈㎺) Result(㏈㎺)
Test Lead
Freq.
(㎒)
QP AV QP AV
AC Power Cord
230.00
52.4
42.4
*
*
S-Video Monitor Out
31.03
45.0 35.0 35.8 32.4
S-Video DVD In
75.59 46.7 36.7 29.5 27.7
S-Video Vid1 In
75.59 46.7 36.7 30.0 28.1
S-Video Vid1 Out
31.03 45.0 35.0 30.3 27.0
S-Video Vid2 In
75.76 46.7 36.7
* *
Front S-Video In
75.52 46.7 36.7 27.9 26.5
CD IN
86.01 47.1 37.1
* *
TAPE OUT
86.01 47.1 37.1
* *
TAPE IN
86.01 47.1 37.1 26.2 *
PRE OUT
135.16 48.9 38.9 27.9 26.2
VID2 IN
86.01 47.1 37.1
*
*
VID1 OUT
86.01 47.1 37.1
*
*
VID1 IN
86.01 47.1 37.1
*
*
DVD IN
60.00 46.1 36.1
*
*
MONITOR OUT
76.94 46.7 36.7 25.0
*
DIRECT IN FL/FR
86.01 47.1 37.1
*
*
DIRECT IN SL/SR
86.01 47.1 37.1
*
*
DIRECT IN C/SW
86.01 47.1 37.1
*
*
DIRECT IN SBL/SBR
86.01 47.1 37.1 26.2
*
COAXIAL IN 1
86.01 47.1 37.1
*
*
COAXIAL IN 2
86.01 47.1 37.1
*
*
COAXIAL OUTPUT
58.12 46.0 36.0 31.8
27.2
COMPONENT MON
40.00 45.4 35.4 30.4
25.9
COMPONENT VID2
40.00 45.4 35.4 27.3
25.4
COMPONENT DVD
40.00 45.4 35.4 27.5 24.6
COAXIAL 3
196.60 51.2 41.2
*
*
VIDEO 3
106.59 47.8 37.8 32.1
30.2
SPEAKER F R
86.01 47.1 37.1
*
*
SPEAKER F L
86.01 47.1 37.1
*
*
SPEAKER BACK SURR
86.01 47.1 37.1
*
*
SPEAKER SURR L
86.01 47.1 37.1
* *
SPEAKER SURR R
86.01 47.1 37.1
* *
SPEAKER CENTER
86.01 47.1 37.1
* *
HEADPHONE
86.01 47.1 37.1
* *
*: less than 25 ㏈㎺
Reference No. : 54120503A Page 16
◀ Anam EMC Test Laboratory ▶
Note:1) The spectrum was checked from 30 to 300 ㎒.
2) The cable (6.0m length) loss is included in a correction factor.
3) Detector function of the measuring instrument:
QP: Quasi-peak, AV: Average
4) QP line: Limit (㏈㎺) = Frequency (㎒) ×0.037 + 43.9
AV line: Limit (㏈㎺) = Frequency (㎒) ×0.037 + 33.9
5) *: Less than 25 ㏈㎺
For the measurement data, see Annex B (35 Copies).
Reference No. : 54120503A Page 17
◀ Anam EMC Test Laboratory ▶
9. HARMONICS
9.1. Operating environment
Temperature
: 0℃
Relative humidity : 40%
9.2. Test set-up and procedure
Harmonics of the fundamental current were measured up to 2 ㎑ using a
universal power analyzer. The measurement was carried out under steady
conditions and using averaging.
The Class of this equipment is “Class A” by clause 5 of EN61000-3-2 : 2000.
The measurement was performed with the Test software (Version 3.07.04)
for Windows
The input signal and load conditions were set as given in clause 4.2.4 of
IEC 60065.
for Windows
The input signal and load conditions were set as given in clause 4.2.4 of
IEC 60065.
9.3. Test instrumentation
Equipment
Mfr.
Type No.
Serial No.
Signal Generator
Anritsu
MG3632A
MT79870
Universal power analyzer Voltech
PM 3300
AK19/1137
Programmable controller
Pacific
360AMXT/UPC32
151
Magnetics module
Pacific
134310
334
9.4. Test result
The equipment does comply with the requirements.
For the measurement data, see Annex C (3 Copies).
For the measurement data, see Annex C (3 Copies).
Reference No. : 54120503A Page 18
◀ Anam EMC Test Laboratory ▶
10. VOLTAGE FLUCTUATIONS-FLICKER
10.1. Operating environment
Temperature
: 0℃
Relative humidity : 40%
10.2. Test set-up and procedure
The open circuit test voltage was the rated voltage of the EUT.
The reference impedance was a conventional impedance being used to calculate
or measure the disturbance caused by an appliance.
or measure the disturbance caused by an appliance.
The measurement was performed with the Test software (Version 3.07.04)
for Windows
The input signal and load conditions were set as given in clause 4.2.4 of
IEC 60065.
for Windows
The input signal and load conditions were set as given in clause 4.2.4 of
IEC 60065.
10.3. Test instrumentation
Equipment
Mfr.
Type No.
Serial No.
Signal Generator
Anritsu
MG3632A
MT79870
Reference impedance
Voltech
IEC Standard 555
IB16/0725
Universal power analyzer Voltech
PM 3300
AK19/1137
Programmable controller
Pacific
360AMXT/UPC32
151
Magnetics module
Pacific
134310
334
10.4. Test result
The equipment does comply with the requirements.
For the measurement data, see Annex D (2 Copies).
Click on the first or last page to see other AVR 135 (serv.man2) service manuals if exist.