Sony SLV-SE35EG / SLV-SE50EE / SLV-SE50EG / SLV-SE60AE1 / SLV-SE60AE2 / SLV-SE60NP / SLV-SE70B / SLV-SE70EE / SLV-SE70EG / SLV-SE70EN / SLV-SE70EX / SLV-SE70NP1 / SLV-SE70NP2 / SLV-SE70UX / SLV-SE70VC1 / SLV-SE70VC2 / SLV-SE80B / SLV-SE80EG / SLV-SE80EN / SLV- Service Manual ▷ View online
1-14
Additional Operations
56
Programme 1
Programme 2
Programme 1
Programme 2
about 20 seconds will be cut off
will be cut off
4
Press
>
/.
to select the setting you want to
change or cancel, then press OK.
The selected setting appears in the TIMER
menu.
menu.
5
• To change the setting, press
?
//
to highlight the item you want to
change, and press
>
/.
to reset it.
• To cancel the setting, press CLEAR.
6
Press MENU.
If any settings remain, turn off the VCR to return to recording standby.
When the timer settings overlap
The programme that starts first has priority and the second programme
starts recording only after the first programme has finished. If the
programmes start at the same time, the programme listed first in the menu
has priority.
starts recording only after the first programme has finished. If the
programmes start at the same time, the programme listed first in the menu
has priority.
about 20 seconds
DATE
CANCEL
SET
:
:
SELECT :
CLEAR
MENU
EXIT
:
TIMER
SP / LP
LIST
TIME
PROG.
2
CDE
LP
VPS / PDC
ON
TUE
2 8 . 9
1 0 : 0 0
1 1 : 3 0
. 1 0
Checking/changing/cancelling timer settings (continued)
57
Additional Operations
Bilingual programme
To listen to
Stereo/main and sub
(left and right channels)
(left and right channels)
Left channel/main
Right channel/sub
Standard sound
To listen to
Main
Sub
Main and sub
Standard sound*
Selecting the sound during playback
Press AUDIO MONITOR to select the sound you want.
Display window
STEREO
STEREO
STEREO
No indicator
* Usually the main sound (monaural)
On-screen display
MAIN
SUB
MAIN/SUB
No indicator
Display window
STEREO
STEREO
STEREO
No indicator
On-screen display
STEREO
LCH
RCH
No indicator
On-screen display
STEREO
No indicator
To listen to
Stereo
Standard sound*
Stereo programme
Recording stereo and bilingual
programmes
programmes
In NICAM system
This VCR receives and records stereo and bilingual programmes based on
the NICAM system (the NICAM indicator appears). When a stereo or
bilingual programme is received, the STEREO indicator appears in the
display window.
the NICAM system (the NICAM indicator appears). When a stereo or
bilingual programme is received, the STEREO indicator appears in the
display window.
To record a NICAM programme, HIFI AUDIO in the OPTIONS-1 menu
should be set to NICAM (initial setting). To check the menu setting, see page
66 for details.
should be set to NICAM (initial setting). To check the menu setting, see page
66 for details.
To select the sound while recording
Press AUDIO MONITOR to select the sound you want.
Display window
STEREO
No indicator
* Usually the mixed sound of left and right channels (monaural)
continued
Additional Operations
58
How sound is recorded on a video tape
The VCR records sound onto two separate tracks. Hi-fi audio is recorded
onto the main track along with the picture. Monaural sound is recorded
onto the normal audio track along the edge of the tape.
onto the main track along with the picture. Monaural sound is recorded
onto the normal audio track along the edge of the tape.
Stereo
Usually mixed
left/right channels
left/right channels
Normal audio track
(monaural)
(monaural)
Hi-fi audio track
(main track)
(main track)
Stereo sound
(left/right channels)
(left/right channels)
Bilingual
Main (left channel)
Sub (right channel)
Sub (right channel)
Usually main sound
Notes
• To listen to playback sounds in stereo, you must use the EURO-AV or AUDIO OUT
• To listen to playback sounds in stereo, you must use the EURO-AV or AUDIO OUT
connections.
• When you play a tape recorded in monaural, the sound is heard in monaural
regardless of the AUDIO MONITOR setting.
• If the AUDIO MONITOR button does not function, check that AUDIO MIX in the
OPTIONS-1 menu is set to OFF (see page 66).
• If HIFI AUDIO is set to STANDARD, the standard sound will be recorded on both
the hi-fi and normal audio tracks. Pressing AUDIO MONITOR will not change the
sound.
sound.
Recording stereo and bilingual programmes (continued)
59
Additional Operations
Searching using
the Smart Search
function
the Smart Search
function
If you record multiple programmes on a
tape, use the Smart Search function to
see what has been recorded on your
tape. You can see information such as
date, time, and channel of programmes
recorded on a tape. You can also start
playback directly from the selected
programme using the SMART SEARCH
screen.
tape, use the Smart Search function to
see what has been recorded on your
tape. You can see information such as
date, time, and channel of programmes
recorded on a tape. You can also start
playback directly from the selected
programme using the SMART SEARCH
screen.
All programmes are listed on the screen,
regardless of how the programme was
recorded.
regardless of how the programme was
recorded.
The data of the last tape inserted into the
VCR is automatically stored in memory.
If you want to recall the latest data
screen, select LATEST DATA in the
SMART SEARCH screen (see page 60).
VCR is automatically stored in memory.
If you want to recall the latest data
screen, select LATEST DATA in the
SMART SEARCH screen (see page 60).
Before you start…
• Turn on your TV and set it to the
video channel.
SMART
SEARCH
SEARCH
1
After recording, press
I
/u to turn on the VCR.
2
Press SMART SEARCH.
3
Press
>
/./?//
to select the
programme you want to start viewing.
4
Press OK.
The VCR starts searching, and playback
starts automatically from the beginning of
the selected programme.
starts automatically from the beginning of
the selected programme.
>
/./?//
OK
1
2
3
4
5
6
7
8
9
0
I/u
continued
SMART SEARCH
EXIT
:
1 4 : 0 0
1 5 : 0 0
FGH
0
1 4 : 0 0
1 5 : 0 0
FGH
2 9 . 9
. 9
3 0 MIN.
BLANK TIME
3
0 : 0 0
1 : 0 0
AAB
0 . 9
2
2
3
SET
:
SELECT
:
OK
SMART SEARCH
1 8 0 MIN.
1 9 : 0 0
2 0 : 0 0
3
2 8 . 9
5
DATE
TIME
PROG.
SMART SEARCH
1 8 0 MIN.
1-15
Additional Operations
60
Searching using the Smart Search function (continued)
To stop searching
Press p STOP.
To exit the SMART SEARCH screen
Press SMART SEARCH.
To record in a blank space
Blank space on the tape will appear as a blank row in the SMART SEARCH
screen. Select the blank row in step 3, then press OK. The VCR rewinds/
fast-forwards the tape to the beginning of the blank space, then stops. Start
recording.
screen. Select the blank row in step 3, then press OK. The VCR rewinds/
fast-forwards the tape to the beginning of the blank space, then stops. Start
recording.
To recall the latest data screen after you remove the
tape
tape
You can display the data of the last tape used to record a programme, even
after you have removed the tape.
after you have removed the tape.
If you reinsert the tape and record additional programmes, be sure to select
LATEST DATA. Otherwise, all of the data for the tape is deleted.
LATEST DATA. Otherwise, all of the data for the tape is deleted.
1
Reinsert the last tape that you used to record a programme.
2
Press SMART SEARCH.
3
Press
>
/.
to highlight LATEST DATA.
If you want to reset the latest data screen,
highlight NO DATA and press OK, then
record a programme.
highlight NO DATA and press OK, then
record a programme.
4
Press OK.
The latest data stored in the VCR’s memory is displayed.
SMART SEARCH
EXIT
:
1 4 : 0 0
1 5 : 0 0
FGH
0
1 4 : 0 0
1 5 : 0 0
FGH
2 9 . 9
. 9
3
0 : 0 0
1 : 0 0
AAB
0 . 9
2
2
3
1 9 : 0 0
2 0 : 0 0
3
DATE
TIME
PROG.
2 8 . 9
5
SET
:
SELECT :
OK
SMART SEARCH
NO DATA
LATEST DATA
1 8 0 MIN.
SMART SEARCH
EXIT
:
SET
:
SELECT :
OK
SMART SEARCH
NO DATA
LATEST DATA
61
Additional Operations
A
B
C
A
D
C
Tips
• You can store information for up to 24 programmes on a single list.
• While recording, you can display the SMART SEARCH screen using the
• You can store information for up to 24 programmes on a single list.
• While recording, you can display the SMART SEARCH screen using the
SMART SEARCH button. If you decide to stop recording, press SMART SEARCH
to make the SMART SEARCH screen disappear first. Then press p STOP.
to make the SMART SEARCH screen disappear first. Then press p STOP.
Notes
• If you begin recording a programme “D” from the middle of a previously recorded
• If you begin recording a programme “D” from the middle of a previously recorded
programme “A” and into another previously recorded programme “B,” the Smart
Search information for the second programme “B” which is recorded over is
deleted.
Search information for the second programme “B” which is recorded over is
deleted.
• You cannot use this function unless the clock is set.
• Depending on the tape, the total or remaining time may not appear correctly.
• When recording a short programme (less than 10 minutes in SP mode, or 20 minutes
• Depending on the tape, the total or remaining time may not appear correctly.
• When recording a short programme (less than 10 minutes in SP mode, or 20 minutes
in LP mode), the Smart Search function may not be available or the programme
information may not appear. Also, if you record a long programme directly after a
short programme, the Smart Search information for the short programme may be
deleted.
information may not appear. Also, if you record a long programme directly after a
short programme, the Smart Search information for the short programme may be
deleted.
• Blank space is measured from the end of the last recorded programme to the end of
the tape. However, if you eject the tape then make a new recording on the same
tape, the original recorded programme(s) is displayed as a blank space.
tape, the original recorded programme(s) is displayed as a blank space.
• If no information is stored in the VCR’s memory, LATEST DATA does not appear in
the SMART SEARCH screen.
Originally recorded programmes
Recording the programme “D” over the programme “A” and “B”
Additional Operations
62
Searching using
the index
function
the index
function
The VCR marks the tape with an index
signal at the point where each recording
begins. Use these signals as references
to find a specific recording.
signal at the point where each recording
begins. Use these signals as references
to find a specific recording.
=
/+
INDEX
SEARCH
SEARCH
1
Insert an indexed tape into the VCR.
2
Press
=
/+
INDEX SEARCH.
• To search ahead, press
+
INDEX SEARCH.
• To search backwards, press
=
INDEX SEARCH.
The VCR starts searching, and playback
starts automatically from that point.
starts automatically from that point.
To stop searching
Press p STOP.
Note
• No index signal will be added when recording starts from recording pause.
• No index signal will be added when recording starts from recording pause.
However, an index signal will be marked if you change the programme position
during recording pause.
during recording pause.
SEARCH
INDEX
1
2
3
63
Additional Operations
Adjusting the picture
Adjusting the tracking
Although the VCR automatically adjusts the tracking when playing a tape
(the
(the
indicator flashes in the display window, then goes off), distortion
may occur if the tape was recorded in poor condition. In this case, manually
adjust the tracking.
adjust the tracking.
During playback, press TRACKING +/– to
display the tracking meter. The distortion
should disappear as you press one of the two
buttons (the
display the tracking meter. The distortion
should disappear as you press one of the two
buttons (the
indicator lights up). To resume
automatic tracking adjustments, eject the tape
and re-insert it.
and re-insert it.
About the Reality Regenerator (RR) function
The Reality Regenerator (RR) function automatically restores the picture to
its original quality during playback.
its original quality during playback.
To use the RR function, press
REALITY REGENERATOR. The
REALITY REGENERATOR button
lights up. You can set RR to
NORMAL or HIGH in the
OPTIONS-2 menu (see page 67).
REALITY REGENERATOR. The
REALITY REGENERATOR button
lights up. You can set RR to
NORMAL or HIGH in the
OPTIONS-2 menu (see page 67).
To turn it off, press REALITY REGENERATOR. The REALITY
REGENERATOR button goes off.
REGENERATOR button goes off.
Tracking meter
TRACKING
REALITY REGENERATOR
continued
1-16
Additional Operations
64
About the Optimum Picture Control (OPC) function
The Optimum Picture Control (OPC) function
automatically improves recording and playback
quality by adjusting the VCR to the condition of
the video heads and tape. To maintain better
picture quality, we recommend that you set OPC
to ON in the OPTIONS-1 menu (with the OPC
indicator in the display window lit). For details,
see page 66.
automatically improves recording and playback
quality by adjusting the VCR to the condition of
the video heads and tape. To maintain better
picture quality, we recommend that you set OPC
to ON in the OPTIONS-1 menu (with the OPC
indicator in the display window lit). For details,
see page 66.
OPC playback
The OPC function automatically works on all types of tapes, including rental
tapes and tapes that were not recorded with OPC.
tapes and tapes that were not recorded with OPC.
OPC recording
Whenever you insert a tape and start recording for the first time, the VCR
adjusts to the tape using the OPC function (the OPC indicator flashes
rapidly). This adjustment is retained until the tape is ejected.
adjusts to the tape using the OPC function (the OPC indicator flashes
rapidly). This adjustment is retained until the tape is ejected.
To deactivate the OPC function
Set OPC to OFF in the OPTIONS-1 menu. The OPC indicator in the display
window goes off.
window goes off.
Tip
• To set tracking to the centre position, press the TRACKING + and – buttons at the
• To set tracking to the centre position, press the TRACKING + and – buttons at the
same time.
Notes
• You can adjust the tracking for the NTSC-recorded tape but the tracking meter
• You can adjust the tracking for the NTSC-recorded tape but the tracking meter
won’t be displayed.
• With the Auto Long Play function on, the OPC function will work only in SP mode.
If the tape speed automatically switches from SP to LP, the OPC function turns off.
If, however, the entire programme is recorded in LP mode, the OPC function will
work.
If, however, the entire programme is recorded in LP mode, the OPC function will
work.
• There is a delay of about ten seconds before the VCR actually starts recording while
the VCR analyses the tape. To avoid the delay, first set the VCR to recording pause
(the OPC indicator flashes slowly) and press r REC to have the VCR analyse the
tape (the OPC indicator flashes rapidly). After the OPC indicator stops flashing,
press P PAUSE to start recording immediately. If you want to start recording
quickly without using the OPC function, first set the VCR to recording pause (the
OPC indicator flashes slowly) and press P PAUSE to start recording.
(the OPC indicator flashes slowly) and press r REC to have the VCR analyse the
tape (the OPC indicator flashes rapidly). After the OPC indicator stops flashing,
press P PAUSE to start recording immediately. If you want to start recording
quickly without using the OPC function, first set the VCR to recording pause (the
OPC indicator flashes slowly) and press P PAUSE to start recording.
SET
:
SELECT :
OK
MENU
EXIT
:
OPTIONS - 1
OPC
EDIT
AUDIO MIX
HIFI AUDIO
AUTO LONG PLAY
TAPE LENGTH
EDIT
AUDIO MIX
HIFI AUDIO
AUTO LONG PLAY
TAPE LENGTH
ON
OFF
OFF
NICAM
OFF
E1 8 0
OFF
OFF
NICAM
OFF
E1 8 0
RETURN
Adjusting the picture (continued)
65
Additional Operations
Changing menu options
1
Press MENU, then select OPTIONS and
press OK.
press OK.
2
Press
>
/.
to highlight OPTIONS-1 or OPTIONS-2, then press OK.
3
Press
>
/.
to select the option, then press OK.
4
Press
>
/.
to change the setting, then press OK.
5
Press MENU to return to the original screen.
SET
:
SELECT :
OK
MENU
EXIT
:
OPTIONS - 1
OPC
EDIT
AUDIO MIX
HIFI AUDIO
AUTO LONG PLAY
TAPE LENGTH
EDIT
AUDIO MIX
HIFI AUDIO
AUTO LONG PLAY
TAPE LENGTH
ON
OFF
OFF
NICAM
OFF
E1 8 0
OFF
OFF
NICAM
OFF
E1 8 0
RETURN
RETURN
SET
:
SELECT :
OK
MENU
EXIT
:
OPTIONS
OPTIONS - 1
OPTIONS - 2
OPTIONS - 2
SET
:
SELECT :
OK
MENU
EXIT
:
OPTIONS - 2
TIMER OPTIONS
POWER SAVE
RF MODULATOR
TV DIRECT REC
RF MODULATOR
TV DIRECT REC
VARIABLE
DIMMER
OFF
OFF
ON
ON
OFF
ON
ON
RR
NORMAL
RETURN
continued
Additional Operations
66
Changing menu options (continued)
Menu option
OPC
EDIT
AUDIO MIX
HIFI AUDIO
AUTO LONG PLAY
TAPE LENGTH
Set this option to
• ON to switch on the OPC (Optimum Picture Control)
function and improve picture quality.
• OFF to switch off OPC.
• ON to minimize picture deterioration when editing.
• OFF to turn off EDIT.
• OFF to turn off EDIT.
• ON to listen to the hi-fi and normal audio tracks at the
same time. The AUDIO MONITOR button will not
function.
function.
• OFF to listen to the hi-fi and normal audio tracks
separately. Select the sound using the AUDIO MONITOR
button.
button.
For details, see page 58.
• NICAM to record NICAM broadcasts on the hi-fi audio
track.
• STANDARD to record standard sound on the hi-fi audio
track.
For details, see page 57.
• ON to change the timer recording tape speed automatically
to the LP mode when the remaining tape becomes shorter
than the recording time.
than the recording time.
• OFF to keep the set tape speed.
• E180 to use an E-180 or shorter type tape.
• E195 to use an E-195 type tape.
• E240 to use an E-240 type tape.
• E300 to use an E-300 type tape.
• E195 to use an E-195 type tape.
• E240 to use an E-240 type tape.
• E300 to use an E-300 type tape.
Menu choices
Initial settings are indicated in bold print.
OPTIONS-1
67
Additional Operations
Menu option
TIMER OPTIONS
DIMMER
POWER SAVE
RF MODULATOR
TV DIRECT REC
RR
Notes
• When you set a timer recording, the indicators in the display window remain on,
• When you set a timer recording, the indicators in the display window remain on,
even though POWER SAVE is set to ON.
• With the EDIT option ON, the OPC function does not work.
Set this option to
• VARIABLE to display the TIMER METHOD menu for
selecting STANDARD or VIDEO PLUS+ when pressing
TIMER button.
• STANDARD to display the TIMER menu when pressing
the
TIMER button.
• VIDEO PLUS+ to display the VIDEO PLUS+ menu when
pressing the
TIMER button.
For details, see pages 41 and 45.
• ON to output a beep sound when any illogical operation is
made.
• OFF to deactivate it.
• ON to turn off the indicators in the display window to
conserve the VCR power.
• OFF to turn on the indicators in the display window while
the VCR is standing by.
• ON if you connect the VCR to your TV using only the
aerial cable.
• OFF if you connect the VCR to your TV using the
EURO-AV cable.
• ON to activate the TV Direct Rec function.
• OFF to deactivate it.
• OFF to deactivate it.
• NORMAL for normal everyday use.
• HIGH for well-used video tapes such as rented tapes.
• HIGH for well-used video tapes such as rented tapes.
Select this option when NORMAL does not improve the
picture quality.
picture quality.
OPTIONS-2
1-17
Editing
68
This VCR (Recorder)
LINE-2 IN
VMC-820HG audio/video cable (not supplied)
TV
Other VCR (Player)
Connecting to a VCR or stereo system
How to connect to record on this VCR
Tip
• You can also use the LINE-1 (TV) connector instead.
• You can also use the LINE-1 (TV) connector instead.
Notes
• Make sure you connect the plugs to jacks of the same colour.
• If the other VCR is a monaural type, leave the red plugs unconnected.
• If you connect this VCR to both the LINE IN and LINE OUT jacks of the other VCR,
• Make sure you connect the plugs to jacks of the same colour.
• If the other VCR is a monaural type, leave the red plugs unconnected.
• If you connect this VCR to both the LINE IN and LINE OUT jacks of the other VCR,
select the input correctly to prevent a humming noise.
• If the other VCR does not have a EURO-AV (Scart) connector, use the VMC-2106HG
cable instead and connect the cable to the line out jacks of the other VCR.
How to connect to a stereo system
Connect the LINE-2 IN AUDIO L/R jacks on this VCR to the audio output
jacks on the stereo system, using the RK-C510HG audio cable (not supplied).
jacks on the stereo system, using the RK-C510HG audio cable (not supplied).
Editing
This VCR (Recorder)
…
LINE-3 IN
: Signal flow
VMC-2121HG EURO-AV cable (not supplied)
TV
Other VCR (Player)
EURO-AV
(Scart)
(Scart)
LINE OUT
69
Editing
r
REC
P
PAUSE
Basic editing
(when recording on this
VCR)
VCR)
Before you start editing
• Turn on your TV and set it to the
video channel.
• Press INPUT SELECT to display “L2”
(“L1” or “L3”) in the display window.
• Press SP/LP to select the tape speed, SP or LP.
• On this VCR, set EDIT to ON in the OPTIONS-1 menu. If the other
• On this VCR, set EDIT to ON in the OPTIONS-1 menu. If the other
VCR has a similar function, turn it on also.
1
Insert a source tape with its safety tab removed into the other
(playback) VCR. Search for the point to start playback and set it to
playback pause.
(playback) VCR. Search for the point to start playback and set it to
playback pause.
2
Insert a tape with its safety tab in place into this (recording) VCR.
Search for the point to start recording and press P PAUSE.
Search for the point to start recording and press P PAUSE.
3
Press r REC on this VCR to set it to recording pause.
4
To start editing, press the P PAUSE buttons on both VCRs at the same
time.
time.
To stop editing
Press the p STOP buttons on both VCRs.
Tip
• To cut out unwanted scenes while editing, press P PAUSE on this VCR when an
• To cut out unwanted scenes while editing, press P PAUSE on this VCR when an
unwanted scene begins. When it ends, press P PAUSE again to resume recording.
Note
• If you start editing following the procedure above, the VCR won’t start recording
• If you start editing following the procedure above, the VCR won’t start recording
with the OPC function. To record a tape with the OPC function, press r REC again
during recording pause in step 3 so the VCR analyses the tape. Then, when you
start editing in step 4, press P PAUSE after the OPC indicator stops flashing. If you
press P PAUSE before the OPC indicator stops flashing, the OPC function is
cancelled.
during recording pause in step 3 so the VCR analyses the tape. Then, when you
start editing in step 4, press P PAUSE after the OPC indicator stops flashing. If you
press P PAUSE before the OPC indicator stops flashing, the OPC function is
cancelled.
Editing
70
Audio dubbing
This feature lets you record over the
normal audio track. The monaural
sound previously recorded is replaced
while the original hi-fi sound remains
unchanged. Use this feature to add
commentary to a tape that you have
recorded with a camcorder.
normal audio track. The monaural
sound previously recorded is replaced
while the original hi-fi sound remains
unchanged. Use this feature to add
commentary to a tape that you have
recorded with a camcorder.
Before you start…
• Connect a playback source to the
LINE-2 IN AUDIO L/R jacks on the
front panel.
front panel.
• Turn on the TV and set it to the video
channel.
AUDIO DUB
1
Insert a source tape into the stereo system (or the playback VCR).
Search for the point to start playback and set it to playback pause.
Search for the point to start playback and set it to playback pause.
2
Insert a prerecorded tape with its safety tab in place into this
(recording) VCR. Search for the end of the section to be replaced and
press P PAUSE.
(recording) VCR. Search for the end of the section to be replaced and
press P PAUSE.
3
Press CLEAR to reset the counter to “0H00M00S.”
4
Rewind the prerecorded tape to the beginning of the section to be
replaced.
replaced.
The VCR enters pause mode.
P
PAUSE
CLEAR
1
2
3
4
5
6
7
8
9
0
71
Editing
5
Press AUDIO DUB.
The programme position changes “L2,” and the indicator appears in
the display window.
the display window.
6
To start editing, press the P PAUSE buttons on this VCR and the stereo
system (or other VCR) at the same time.
system (or other VCR) at the same time.
When the counter reaches “0H00M00S,” audio dubbing stops
automatically.
automatically.
To stop while editing
Press p STOP on this VCR and the stereo system (or other VCR).
Note
• After you use this feature, the audio in playback mode is automatically set to
• After you use this feature, the audio in playback mode is automatically set to
monaural.
To listen to both the hi-fi and normal audio
Set AUDIO MIX to ON in the OPTIONS-1 menu (page 66). Use this feature
to listen to dubbed audio over the original hi-fi audio. When AUDIO MIX is
set to ON, the AUDIO MONITOR button does not function.
to listen to dubbed audio over the original hi-fi audio. When AUDIO MIX is
set to ON, the AUDIO MONITOR button does not function.
Remember to reset AUDIO MIX to OFF after playing the tape.
Click on the first or last page to see other SLV-SE35EG / SLV-SE50EE / SLV-SE50EG / SLV-SE60AE1 / SLV-SE60AE2 / SLV-SE60NP / SLV-SE70B / SLV-SE70EE / SLV-SE70EG / SLV-SE70EN / SLV-SE70EX / SLV-SE70NP1 / SLV-SE70NP2 / SLV-SE70UX / SLV-SE70VC1 / SLV-SE70VC2 / SLV-SE80B / SLV-SE80EG / SLV-SE80EN / SLV- service manuals if exist.