Sony SLV-SE35EG / SLV-SE50EE / SLV-SE50EG / SLV-SE60AE1 / SLV-SE60AE2 / SLV-SE60NP / SLV-SE70B / SLV-SE70EE / SLV-SE70EG / SLV-SE70EN / SLV-SE70EX / SLV-SE70NP1 / SLV-SE70NP2 / SLV-SE70UX / SLV-SE70VC1 / SLV-SE70VC2 / SLV-SE80B / SLV-SE80EG / SLV-SE80EN / SLV- Service Manual ▷ View online
1-10
Basic Operations
40
Notes
• The display does not appear during still (pause) mode or slow-motion playback.
• The display will not appear while playing an NTSC-recorded tape.
• If a tape has portions recorded in both PAL and NTSC systems, the time counter
• The display does not appear during still (pause) mode or slow-motion playback.
• The display will not appear while playing an NTSC-recorded tape.
• If a tape has portions recorded in both PAL and NTSC systems, the time counter
reading will not be correct. This discrepancy is due to the difference between the
counting cycles of the two video systems.
counting cycles of the two video systems.
• When you insert a non-standard commercially available tape, the remaining time
may not be correct.
• The remaining time is intended for rough measurement only.
• About 30 seconds after the tape begins playback, the tape remaining time will be
• About 30 seconds after the tape begins playback, the tape remaining time will be
displayed.
Recording what you are watching on the TV
(TV Direct Rec)
(TV Direct Rec)
If you use the SMARTLINK connection, you can easily record what you are
watching on the TV (other than tapes being played on the VCR).
watching on the TV (other than tapes being played on the VCR).
1
Insert a tape with its safety tab in place.
2
Press r REC while you are watching a TV programme or external
source.
source.
The VCR automatically turns on, then the TV indicator lights up and
the VCR starts recording what you are watching on the TV.
the VCR starts recording what you are watching on the TV.
Tips
• The TV indicator appears in the display window after you press r REC in some
• The TV indicator appears in the display window after you press r REC in some
situations such as:
– when you are watching a source connected to the TV’s line input, or
– when the TV tuner preset data for the programme position is different from the
– when you are watching a source connected to the TV’s line input, or
– when the TV tuner preset data for the programme position is different from the
data in the VCR tuner preset.
• If there is a tape with its safety tab in place in the VCR, the VCR automatically turns
on and starts recording what you are watching on the TV when you press r REC.
• You can turn the TV Direct Rec function ON and OFF in the OPTIONS-2 menu (see
page 67).
Notes
• You cannot record what you are watching using this method when the VCR is in the
• You cannot record what you are watching using this method when the VCR is in the
following modes; pause, timer standby, tuner preset, Auto Set Up, and recording.
• When the TV indicator is lit in the display window, do not turn off the TV nor
change the TV programme position. When the TV indicator is not lit, the VCR
continues recording the programme even if you change the TV programme position
on the TV.
continues recording the programme even if you change the TV programme position
on the TV.
Recording TV programmes (continued)
Basic Operations
Basic Operations
41
1
Press
TIMER.
• When you set TIMER OPTIONS to
VARIABLE
The TIMER METHOD menu appears
on the TV screen. Press
on the TV screen. Press
>
/.
to select
VIDEO PLUS+, then press OK.
• When you set TIMER OPTIONS to
VIDEO PLUS+
The VIDEO PLUS+ menu appears on
the TV screen.
the TV screen.
TIMER
Recording TV
programmes
using the VIDEO
Plus+ system
programmes
using the VIDEO
Plus+ system
The VIDEO Plus+ system is the feature
that simplifies programming the VCR to
make timer recording. Just enter the
Plus Code listed in the TV programme
guide. The date, times, and programme
position of that programme are set
automatically. You can preset up to
eight programmes at a time.
that simplifies programming the VCR to
make timer recording. Just enter the
Plus Code listed in the TV programme
guide. The date, times, and programme
position of that programme are set
automatically. You can preset up to
eight programmes at a time.
Before you start…
• Check that the VCR clock is set to the
correct time and date.
• Insert a tape with its safety tab in
place. Make sure the tape is longer
than the total recording time.
than the total recording time.
• Turn on your TV and set it to the
video channel.
• Set TIMER OPTIONS to
VIDEO PLUS+ or VARIABLE in the
OPTIONS-2 menu (see page 67).
OPTIONS-2 menu (see page 67).
TIMER
CLEAR
I/u
Programme
number
buttons
number
buttons
>
/./?//
OK
p
p
STOP
1
2
3
4
5
6
7
8
9
0
SET
:
SELECT :
OK
MENU
EXIT
:
TIMER METHOD
STANDARD
VIDEO PLUS+
VIDEO PLUS+
MENU
EXIT
:
VIDEO PLUS+
SET
:
–
0–9
– – – – – – –
–
TUE
2 8 . 9
PLUS CODE
continued
Basic Operations
42
Recording TV programmes using the ShowView system
(continued)
(continued)
1
2
3
4
5
6
7
8
9
0
CLEAR
MENU
EXIT
:
–
1 2 4 6 – – –
–
TUE
2 8 . 9
VIDEO PLUS+
PLUS CODE
SET
: 0–9
CANCEL
: CLEAR
CONFIRM
OK
:
2
Press the programme number buttons to
enter the Plus Code.
enter the Plus Code.
If you make a mistake, press CLEAR and
re-enter the correct number.
re-enter the correct number.
3
Press OK.
The date, start and stop times,
programme position, tape speed, and
VPS/PDC setting appear on the TV
screen.
programme position, tape speed, and
VPS/PDC setting appear on the TV
screen.
• If “--” appears in the “PROG.”
(programme) column (this may
happen for local broadcasts), you have to set the appropriate
programme position manually.
happen for local broadcasts), you have to set the appropriate
programme position manually.
Press
>
/.
to select the desired programme position.
To record from another source connected to the LINE-1 (TV)
connector, the LINE-2 IN jacks, or the LINE-3 IN (Scart) connector,
press INPUT SELECT to display “L1,” “L2,” or “L3.”
connector, the LINE-2 IN jacks, or the LINE-3 IN (Scart) connector,
press INPUT SELECT to display “L1,” “L2,” or “L3.”
You will only have to do this operation once for the referred
channel. The VCR will then store your setting.
channel. The VCR will then store your setting.
If the information is incorrect, press CLEAR to cancel the setting.
4
If you want to change the date, tape
speed, and the VPS/PDC function
setting:
speed, and the VPS/PDC function
setting:
1 Press
?
//
to highlight the item
you want to change.
2 Press
>
/.
to reset it.
• To record the same programme every
day or the same day every week, see “Daily/weekly recording”
on page 43.
on page 43.
• To use the VPS/PDC function, set VPS/PDC to ON.
For details of the VPS/PDC function, see “Timer recording with
VPS/PDC signals” on page 43.
VPS/PDC signals” on page 43.
OK
PLAY
CLEAR
DATE
CANCEL
SET
:
:
SELECT :
CLEAR
MENU
EXIT
:
TIMER
SP / LP
LIST
TIME
PROG.
TODAY
5
1 9 : 0 0
2 0 : 0 0
3
SP
VPS / PDC
OFF
TUE
2 8 . 9
OK
PLAY
DATE
CANCEL
SET
:
:
SELECT :
CLEAR
MENU
EXIT
:
TIMER
SP / LP
LIST
TIME
PROG.
TODAY
5
1 9 : 0 0
2 0 : 0 0
3
SP
VPS / PDC
OFF
TUE
2 8 . 9
Basic Operations
Basic Operations
43
TODAY n SUN-SAT (Sunday to Saturday) n MON-SAT (Monday to Saturday)
n
n
MON-FRI (Monday to Friday) n SAT (every Saturday) .....
n
MON (every Monday) n SUN (every Sunday) n 1 month later
n
(dates count down) n TOMORROW n TODAY
MENU
5
Press MENU to exit the menu.
6
Press
I
/u to turn off the VCR.
The
indicator appears in the display window and the VCR
stands by for recording.
To stop recording
To stop the VCR while recording, press p STOP.
Daily/weekly recording
In step 4 above, press
.
to select the recording pattern. Each time you press
.
, the indication changes as shown below. Press
>
to change the indication
in reverse order.
Timer recording with VPS/PDC signals
Some broadcast systems transmit VPS (Video Programme System) or PDC
(Programme Delivery Control) signals with their TV programmes. These
signals ensure that your timer recordings are made regardless of broadcast
delays, early starts, or broadcast interruptions (with the VPS or PDC
indicator in the display window lit).
(Programme Delivery Control) signals with their TV programmes. These
signals ensure that your timer recordings are made regardless of broadcast
delays, early starts, or broadcast interruptions (with the VPS or PDC
indicator in the display window lit).
To use the VPS/PDC function, set VPS/PDC to ON in step 4 above. You can
also use the VPS/PDC function for a source connected to the LINE-1 (TV)
connector, the LINE-2 IN jacks, or the LINE-3 IN (Scart) connector.
also use the VPS/PDC function for a source connected to the LINE-1 (TV)
connector, the LINE-2 IN jacks, or the LINE-3 IN (Scart) connector.
continued
1-11
Basic Operations
44
To record satellite broadcasts
If you connect the satellite tuner and the VCR, you can record satellite
programmes.
programmes.
1
Turn on the satellite tuner.
2
On the satellite tuner, select the satellite programme for which you
want to make a timer setting.
want to make a timer setting.
3
Keep the satellite tuner turned on until the VCR finishes recording the
satellite programme for which you have made a timer setting.
satellite programme for which you have made a timer setting.
To use the VCR after setting the timer
To use the VCR before a timer recording begins, just press
I
/u. The
indicator turns off and the VCR switches on. Remember to press
I
/u to
reset the VCR after using the VCR.
You can also do the following tasks while the VCR is recording:
• Reset the counter.
• Display tape information on the TV screen.
• Check the timer settings.
• Watch another TV programme.
• Display tape information on the TV screen.
• Check the timer settings.
• Watch another TV programme.
Tips
• To set the programme position with a two digit number, press
• To set the programme position with a two digit number, press
– / – –
(ten’s
digit)
button followed by the programme number button.
• To set the programme position, you can also use the PROG +/– or programme
number buttons.
• To set the tape speed, you can also use the SP/LP button.
• When you are recording a programme in the SP mode and the remaining tape
• When you are recording a programme in the SP mode and the remaining tape
becomes shorter than the recording time, the tape speed is automatically changed to
the LP mode. Note that some interference will appear on the picture at the point the
tape speed is changed. If you want to keep the same tape speed, set AUTO LONG
PLAY to OFF in the OPTIONS-1 menu (page 66).
the LP mode. Note that some interference will appear on the picture at the point the
tape speed is changed. If you want to keep the same tape speed, set AUTO LONG
PLAY to OFF in the OPTIONS-1 menu (page 66).
• To check, change, or cancel the programme setting, press ?// to choose LIST,
then press OK after step 4. For details, see step 3 in “Checking/changing/
cancelling timer settings” (page 55).
cancelling timer settings” (page 55).
Notes
• If the VPS/PDC signal is too weak or the broadcasting station failed to transmit
• If the VPS/PDC signal is too weak or the broadcasting station failed to transmit
VPS/PDC signals, the VCR will start recording at the set time without using the
VPS/PDC function.
VPS/PDC function.
• The
indicator flashes in the display window when you press
I
/u with no tape
inserted.
• When you set TIMER OPTIONS to STANDARD in the OPTIONS-2 menu, the
VIDEO PLUS+ menu does not appear on the TV screen. Select VIDEO PLUS+ or
VARIABLE.
VARIABLE.
Recording TV programmes using the ShowView system
(continued)
(continued)
Basic Operations
Basic Operations
45
MENU
Setting the timer
manually
manually
If the VIDEO Plus+ system is not
available in your area, follow the
instructions below to set the timer to
record programmes.
available in your area, follow the
instructions below to set the timer to
record programmes.
Before you start…
• Check that the VCR clock is set to the
correct time and date.
• Insert a tape with its safety tab in
place. Make sure the tape is longer
than the total recording time.
than the total recording time.
• Turn on your TV and set it to the
video channel.
• Set TIMER OPTIONS to STANDARD
or VARIABLE in the OPTIONS-2
menu (see page 67).
menu (see page 67).
>
/./?//
OK
p
p
STOP
I/u
INPUT SELECT
TIMER
1
Press
TIMER.
• When you set TIMER OPTIONS to
VARIABLE
The TIMER METHOD menu appears
on the TV screen. Press
on the TV screen. Press
>
/.
to select
STANDARD, then press OK.
• When you set TIMER OPTIONS to
STANDARD
The TIMER menu appears on the TV
screen.
screen.
TIMER
1
2
3
4
5
6
7
8
9
0
DATE
CANCEL
SET
:
:
SELECT :
CLEAR
MENU
EXIT
:
TIMER
SP / LP
LIST
TIME
PROG.
TODAY
–
– – : – –
– – : – –
–
SP
VPS / PDC
OFF
TUE
2 8 . 9
SET
:
SELECT :
OK
MENU
EXIT
:
TIMER METHOD
STANDARD
VIDEO PLUS+
VIDEO PLUS+
continued
Basic Operations
46
Setting the timer manually (continued)
2
Set the date, start and stop times,
programme position, tape speed, and
VPS/PDC function:
programme position, tape speed, and
VPS/PDC function:
1 Press
/
to highlight each item in turn.
2 Press
>
/.
to set each item.
To correct a setting, press
?
to return to
that setting and reset.
• To record the same programme every day or the same day every
week, see “Daily/weekly recording” below.
• To use the VPS/PDC function, set VPS/PDC to ON. For details of
the VPS/PDC function, see “Timer recording with VPS/PDC
signals” on page 43.
signals” on page 43.
• To record from another source connected to the LINE-1 (TV)
connector, the LINE-2 IN jacks, or the LINE-3 IN (Scart) connector,
press INPUT SELECT to display “L1,” “L2,” or “L3” in the
“PROG.” position.
press INPUT SELECT to display “L1,” “L2,” or “L3” in the
“PROG.” position.
3
Press MENU to exit the menu.
4
Press
I
/u to turn off the VCR.
The
indicator appears in the display window and the VCR
stands by for recording.
To record from another source, leave the connected equipment
switched on.
switched on.
To stop recording
To stop the VCR while recording, press p STOP.
Daily/weekly recording
In step 2 above, press
.
to select the recording pattern. Each time you press
.
, the indication changes as shown below. Press
>
to change the indication
in reverse order.
OK
PLAY
INPUT SELECT
MENU
DATE
CANCEL
SET
:
:
SELECT :
CLEAR
MENU
EXIT
:
TIMER
SP / LP
LIST
TIME
PROG.
TODAY
5
1 9 : 0 0
2 0 : 0 0
3
SP
VPS / PDC
OFF
TUE
2 8 . 9
TODAY n SUN-SAT (Sunday to Saturday) n MON-SAT (Monday to Saturday)
n
n
MON-FRI (Monday to Friday) n SAT (every Saturday) .....
n
MON (every Monday) n SUN (every Sunday) n 1 month later
n
(dates count down) n TOMORROW n TODAY
Basic Operations
Basic Operations
47
Tips
• To set the programme position, you can also use the PROG +/– or programme
• To set the programme position, you can also use the PROG +/– or programme
number buttons.
• To set the tape speed, you can also use the SP/LP button.
• When you are recording a programme in the SP mode and the remaining tape
• When you are recording a programme in the SP mode and the remaining tape
becomes shorter than the recording time, the tape speed is automatically changed to
the LP mode. Note that some interference will appear on the picture at the point the
tape speed is changed. If you want to keep the same tape speed, set AUTO LONG
PLAY to OFF in the OPTIONS-1 menu (page 66).
the LP mode. Note that some interference will appear on the picture at the point the
tape speed is changed. If you want to keep the same tape speed, set AUTO LONG
PLAY to OFF in the OPTIONS-1 menu (page 66).
• Even if you set TIMER OPTIONS to VIDEO PLUS+ in the OPTIONS-2 menu, you
can set the timer manually. Press MENU to select TIMER, then go to step 2.
Notes
• When setting the timer with VPS/PDC signals, enter the start and stop times
• When setting the timer with VPS/PDC signals, enter the start and stop times
exactly as indicated in the TV programme guide, otherwise the VPS/PDC function
won’t work.
won’t work.
• If the VPS/PDC signal is too weak or the broadcasting station failed to transmit
VPS/PDC signals, the VCR will start recording at the set time without using the
VPS/PDC function.
VPS/PDC function.
• The
indicator flashes in the display window when you press
I
/u with no tape
inserted.
1-12
Additional Operations
48
Shuttle ring
JOG
Playing/searching
at various speeds
at various speeds
Playback options
View the picture during
fast-forward or rewind
fast-forward or rewind
Play at high speed
×
2
&
SLOW
)
FF
·
PLAY
Operation
During fast-forward, hold down )# FF/) FF. During
rewind, hold down 03 REW/0 REW.
rewind, hold down 03 REW/0 REW.
• During playback, press )# FF or 03 REW on the remote
commander.
• During playback, hold down )# FF/) FF or 03 REW/
0
REW. When you release the button, normal playback
resumes.
0
REW
)#
FF
03
REW
Additional Operations
1
2
3
4
5
6
7
8
9
0
49
Additional Operations
To resume normal playback
Press ·
PLAY.
Playback options
Play at twice the normal
speed
speed
Play in slow motion
Play frame by frame
Rewind and start play
Operation
During playback, press
×
2.
During playback, press & SLOW.
During pause, press )# FF or 03 REW on the remote
commander. Hold down )# FF or 03 REW to play one
frame each second.
commander. Hold down )# FF or 03 REW to play one
frame each second.
During stop, press ·
PLAY on the VCR while holding
down 0 REW on the VCR.
down 0 REW on the VCR.
Using the shuttle ring
With the shuttle ring, you can operate a variety of playback options. There
are two ways for using the shuttle ring, normal mode and jog mode.
are two ways for using the shuttle ring, normal mode and jog mode.
To use the shuttle ring in normal mode
During playback or pause, turn the shuttle ring clockwise or anticlockwise.
Each change in the shuttle ring position changes the playback mode in the
following way.
Each change in the shuttle ring position changes the playback mode in the
following way.
Pause
Slow motion
in reverse
in reverse
Normal speed
in reverse
in reverse
Double speed
in reverse
in reverse
High speed in
reverse
reverse
Slow motion
Normal speed
(Initial speed)
(Initial speed)
Double speed
High speed
continued
Additional Operations
50
To use the shuttle ring in jog mode
Use this mode for frame-by-frame playback.
Press JOG to enter the jog mode. The JOG button lights up. If you change to
the jog mode during any playback mode, the playback pauses so you can see
a still picture. Each change in the shuttle ring position shifts the picture one
frame. To shift frames in reverse, turn the shuttle ring anticlockwise. The
frame shift speed depends on the speed you turn the shuttle ring.
the jog mode during any playback mode, the playback pauses so you can see
a still picture. Each change in the shuttle ring position shifts the picture one
frame. To shift frames in reverse, turn the shuttle ring anticlockwise. The
frame shift speed depends on the speed you turn the shuttle ring.
To resume normal mode, press JOG again. The JOG button goes off.
Tip
• Adjust the picture using the TRACKING +/– buttons if:
• Adjust the picture using the TRACKING +/– buttons if:
– Streaks appear while playing in slow motion.
– Bands appear at the top or bottom while pausing.
– The picture shakes while pausing.
– Bands appear at the top or bottom while pausing.
– The picture shakes while pausing.
To set tracking to the centre position, press both buttons (+/–) at the same time.
Notes
• The sound is muted during these operations.
• In the LP mode, noise may appear or there may be no colour.
• The sound is muted during these operations.
• In the LP mode, noise may appear or there may be no colour.
Playing/searching at various speeds (continued)
51
Additional Operations
Recording TV
programmes
using Dial Timer
programmes
using Dial Timer
The Dial Timer function allows you to make timer recordings of
programmes without turning on your TV. Set the recording timer to
record up to eight programmes that will be broadcast within the next 24
hours using DIAL TIMER. The recording start time and stop time can
be set at 15 minutes intervals.
programmes without turning on your TV. Set the recording timer to
record up to eight programmes that will be broadcast within the next 24
hours using DIAL TIMER. The recording start time and stop time can
be set at 15 minutes intervals.
Before you start…
• Check that the VCR clock is set to the correct time.
• Insert a tape with its safety tab in place. Make sure the tape is longer
• Insert a tape with its safety tab in place. Make sure the tape is longer
than the total recording time.
DIAL TIMER
1
Press DIAL TIMER.
“START” and the recording start time appear alternately in the display
window.
window.
2
Turn DIAL TIMER to set the recording start time.
The time changes in 15 minute intervals.
VIDEO
SP
OPC
VIDEO
SP
OPC
VIDEO
SP
OPC
continued
1-13
Additional Operations
52
Recording TV programmes using Dial Timer (continued)
3
Press DIAL TIMER.
“STOP” and the recording stop time appear alternately in the display
window.
window.
4
Turn DIAL TIMER to set the recording stop time.
The time changes in 15 minute intervals.
5
Press DIAL TIMER.
“PROG” and the programme position appear alternately in the display
window.
window.
6
Turn DIAL TIMER to set the programme position.
To record from a decoder or other source connected to the LINE-1 (TV)
connector, the LINE-2 IN jacks, or the LINE-3 IN (Scart) connector,
press INPUT SELECT to display “L1,” “L2,” or “L3.”
connector, the LINE-2 IN jacks, or the LINE-3 IN (Scart) connector,
press INPUT SELECT to display “L1,” “L2,” or “L3.”
VIDEO
SP
OPC
VIDEO
SP
OPC
VIDEO
SP
OPC
VIDEO
SP
OPC
VIDEO
SP
OPC
VIDEO
SP
OPC
53
Additional Operations
To stop recording
To stop the VCR while recording, press p STOP.
To use the VCR after setting the timer
To use the VCR before a timer recording begins, just press
I
/u. The
indicator turns off and the VCR switches on. Remember to press
I
/u to
reset the VCR after using the VCR.
Tips
• The programme is recorded in the current tape speed mode. To change the tape
• The programme is recorded in the current tape speed mode. To change the tape
speed, press SP/LP before you complete the setting in step 7.
• To check, change, or cancel the programme setting, see “Checking/changing/
cancelling timer settings” (page 55).
Notes
• The
• The
indicator flashes in the display window when you complete the setting in
step 7 with no tape inserted.
• If eight programmes have already been set, “FULL” appears in the display window
for about three seconds in step 1.
7
Press DIAL TIMER to complete the setting.
“OK” appears in the display window for about five seconds.
The
indicator appears in the display window and the VCR stands by
for recording.
Additional Operations
54
Setting the
recording
duration time
recording
duration time
After starting recording in the normal
way, you can have the VCR stop
recording automatically after a specified
duration.
way, you can have the VCR stop
recording automatically after a specified
duration.
1
While recording, press r REC.
The
indicator appears in the display window.
2
Press r REC repeatedly to set the duration.
Each press advances the time in increments of 30 minutes.
The tape counter decreases minute by minute to 0:00, then the VCR
stops recording and turns off automatically.
stops recording and turns off automatically.
To extend the duration
Press r REC repeatedly to set a new duration.
To cancel the duration
Press r REC repeatedly until the
indicator disappears and the VCR
returns to normal recording mode.
To stop recording
To stop the VCR while recording, press p STOP.
Note
• You cannot display the current tape time in the display window when setting the
• You cannot display the current tape time in the display window when setting the
recording duration.
r
REC
0:30
1:00
5:30
6:00
Normal recording
VIDEO
SP
OPC
55
Additional Operations
1
Press
I
/u to turn on the VCR.
2
Press MENU, then press
>
/.
to highlight LISTS and press OK.
3
Press
>
/.
to highlight TIMER LIST, then
press OK:
• If you want to change or cancel a setting,
go on to the next step.
• If you do not need to change or cancel
the settings, press MENU, then turn off
the VCR to return to recording standby.
the VCR to return to recording standby.
Checking/
changing/
cancelling timer
settings
changing/
cancelling timer
settings
Before you start…
• Turn on your TV and set it to the
video channel.
>
/./?//
OK
CLEAR
MENU
I/u
1
2
3
4
5
6
7
8
9
0
continued
MENU
EXIT
:
TIMER LIST
CANCEL
SET
:
:
SELECT :
OK
CLEAR
RETURN
2 0 : 0 0
2 1 : 0 0
DATE
TIME
PROG.
AAB
SP
2
0 : 0 0
1 : 3 0
CDE
LP
MON
1 4 : 0 0
1 5 : 0 0
LP
SUN
6 : 3 0
7 : 0 0
LP
–
– : – –
– : – –
–
–
–
– . –
–
– FRI
. 1 0
VPS
PDC
PDC
VPS
PDC
PDC
0
3
. 9
1
1
FGH
I
–
– : – –
– : – –
–
–
–
– . –
–
–
– : – –
– : – –
–
–
–
– . –
–
TUE
2 8 . 9
1 9 : 0 0
2 0 : 0 0
3
SP
TODAY
5
J K
Click on the first or last page to see other SLV-SE35EG / SLV-SE50EE / SLV-SE50EG / SLV-SE60AE1 / SLV-SE60AE2 / SLV-SE60NP / SLV-SE70B / SLV-SE70EE / SLV-SE70EG / SLV-SE70EN / SLV-SE70EX / SLV-SE70NP1 / SLV-SE70NP2 / SLV-SE70UX / SLV-SE70VC1 / SLV-SE70VC2 / SLV-SE80B / SLV-SE80EG / SLV-SE80EN / SLV- service manuals if exist.