Sony SLV-D970PB / SLV-D970PE / SLV-D970PN / SLV-D970PR / SLV-D975PE / SLV-D980PD / SLV-D980PGI Service Manual ▷ View online
2-11
2-4-9 Gear Loading Drive, Slider Cam,
Lever Load S, T Ass’y Removal
1) Remove the Belt Pulley. (Refer to Fig. 2-38)
2) Remove the Gear Loading Drive 1 after releasing Hook [A] in
2) Remove the Gear Loading Drive 1 after releasing Hook [A] in
the direction arrow as shown in detail drawing.
3) Remove the Slider Cam 2.
4) Remove the Lever Load S Ass’y 3 & Lever Load T Ass’y 4.
4) Remove the Lever Load S Ass’y 3 & Lever Load T Ass’y 4.
Fig. 2-21 Gear Loading Drive, Slider Cam,
Lever T, S Load Ass’y Removal
2-4-10 Gear Loading Drive, Slider Cam,
Lever Load S, T Ass’y Assembly
1) When reinstalling, be sure to align dot of Lever Load T Ass’y
1 with dot of Lever Load S Ass’y 2 as shown in drawing,
(Refer to Timing Point 1).
(Refer to Timing Point 1).
2) Insert the Pin A,B,C,D into the Slider Cam 3 hole,
3) Be sure to align dot of Lever Load T 1 and dot of Gear Loading
3) Be sure to align dot of Lever Load T 1 and dot of Gear Loading
Drive 4, (Refer to Timing Point 2).
4) Aline dot of Gear Loading drive 4 with mark of Slider Cam 3
as shown in drawing (Refer to Timing Point 3).
Fig. 2-22 Gear Loading Drive, Slider Cam,
Lever Load S, T Ass’y Assembly
1
GEAR LOADING DRIVE
3
LEVER LOAD S ASS'Y
4
LEVER LOAD T ASS'Y
2
SLIDE CAM
HOOK (A)
2
LEVER LOAD S
1
LEVER LOAD T
PIN A
PIN C
PIN B
PIN D
3
SLIDER CAM
TIMING POINT 2
TIMING POINT 1
TIMING POINT 3
2-12
1
SPRING TENTION LEVER
2
LEVER TENTION ASS`Y
3
BAND BRAKE ASS`Y
STOPPER
MARK[B]
"A"
2-4-11 Lever Pinch Drive,
Lever Tension Drive Removal
1) Remove the Lever Pinch Drive 1, Lever Tension Drive 2.
Fig. 2-23 Lever Pinch Drive,
Lever Tension Drive Removal
2-4-12 Lever Tension Ass’y,
Band Brake Ass’y Removal
1) Remove the Lever Brake S Ass’y (Refer to Fig 2-25).
2) Remove the Spring Tension Lever 1.
3) Rotate stopper of Main Base in the direction of arrow “A”.
4) Lift the Lever Tension Ass’y 2 & Band brake Ass’y 3.
2) Remove the Spring Tension Lever 1.
3) Rotate stopper of Main Base in the direction of arrow “A”.
4) Lift the Lever Tension Ass’y 2 & Band brake Ass’y 3.
Note:
1) When replacing the Lever Tension Ass’y 2, be sure to apply
Grease on the post,
2) Take care not to touch stain on the felt side, and not to be folder
and broken Band brake Ass’y
3) After Lever Tension Ass’y seated, Rotate stopper of Main Base
to the Mark[B].
Fig. 2-24 Lever Tension Ass’y,
Band Brake Ass’y Removal
1
LEVER PINCH DRIVE
2
LEVER TENSION DRIVE
2-13
2-4-13 Lever Brake S, T Ass’y Removal
1) Release the Hook [A] and the Hook [B], [C] in the direction of
arrow as shown in Fig 2-25.
2) Lift the Lever S, T Brake Ass’y 1, 2 with spring brake 3.
Assembly:
1) Assembly the Lever S Brake Ass’y 1 on the Main Base.
2) Assembly the Lever T Brake Ass’y 2 with spring brake 3.
2) Assembly the Lever T Brake Ass’y 2 with spring brake 3.
Note:
Take extreme care not to be folded and
transformed Spring Brake at removing or reinstalling.
Fig. 2-25 Lever Brake S, T Ass’y Removal
2-4-14 Gear Idle Ass’y Removal
1) Push the Lever Idle 1 in the direction of arrow “A”, “B”.
2) Lift the Lever Idle 1.
2) Lift the Lever Idle 1.
Assembly:
1) Apply oil in two Bosses of Lever Idle 1.
2) Assemble the Gear Idle 2 with the Lever Idle 1.
2) Assemble the Gear Idle 2 with the Lever Idle 1.
Note:
When replacing the Gear Idle 2, be sure to add oil in the
boss of Lever Idle 1.
Fig. 2-26 Gear Idle Ass’y Removal
HOOK(A)
2
LEVER T BRAKE ASS`Y
1
LEVER S BRAKE ASS'Y
HOOK (B)
HOOK (C)
3
SPRING BRAKE
2
GEAR IDLE
"B"
1
LEVER IDLE
2
GEAR IDLE
"A"
HOOK "C"
2-14
2-4-15 Disk S, T Reel Removal
1) Lift the Disk S, T Reel 1, 2.
Fig. 2-27 Disk S, T Reel Removal
2-4-16 Holder Clutch Ass’y Removal
1) Remove the Washer Slit 1.
2) Lift the Holder Clutch Ass’y 2.
2) Lift the Holder Clutch Ass’y 2.
Note:
When you reinstall Holder Clutch Ass’y
1) Check the condition of spring as shown in detail A.
2) Don't push Holder Clutch Ass’y down with excessive force Just
2) Don't push Holder Clutch Ass’y down with excessive force Just
insert Holder Clutch Ass’y into post center with dead force and
Rotate it smoothly.
Be sure to confirm that spring is in the slit of Gear Center Ass’y
as shown in detail B.
Rotate it smoothly.
Be sure to confirm that spring is in the slit of Gear Center Ass’y
as shown in detail B.
Fig. 2-28 Holder Clutch Ass’y Removal
1
WASHER SLIT
2
HOLDER CLUTCH ASS`Y
DETAIL A
<BAD>
SPRING
<GOOD>
<BAD>
SPRING
<GOOD>
DETAIL B
1
DISK S REEL
2
DISK T REEL
Click on the first or last page to see other SLV-D970PB / SLV-D970PE / SLV-D970PN / SLV-D970PR / SLV-D975PE / SLV-D980PD / SLV-D980PGI service manuals if exist.